PE Pipe Coil Bag 20-32mm OD - Durable Reusable Sheath

PE Pipe Coil Bag 20-32mm OD

The PE Pipe Coil Bag is a purpose-designed reusable sheath for protecting and transporting coiled PE and MDPE pipe with an outside diameter of 20mm to 32mm. That range covers the most frequently specified sizes in water mains installation, gas distribution, and drainage groundwork across the UK: 20mm, 25mm, and 32mm polyethylene pipe. The bag fits over the coil, securing it for vehicle transit and site storage whilst allowing the operative to feed pipe from the coil without removing the bag entirely, keeping the remaining coil contained and protected on muddy or abrasive ground.

Why choose the PE Pipe Coil Bag 20-32mm OD

• Correct fit for the most common PE pipe sizes: The 20-32mm OD range directly covers standard MDPE water main and PE gas pipe coil sizes used daily on UK utilities and groundwork sites, removing any guesswork about compatibility before purchase.

• Reusable across multiple projects: Unlike disposable polythene wrapping or single-use transit packaging, the bag is designed for repeated deployment, making it a cost-effective consumable for contractors running several pipe-laying projects concurrently.

• Elasticated top and base: Both openings use elasticated construction to grip the coil securely during handling. The elastication also allows pipe to be fed out from the coil whilst the bag remains in place, keeping the unused portion clean and contained.

• Drawstring cord lock at base: The adjustable cord lock cinches the base opening to suit different coil dimensions within the 20-32mm range, providing a secure fit without loose material that could catch on site equipment or vehicle fixings.

• Protects pipe from UV, abrasion, and contamination: PE and MDPE pipe coils stored outdoors are vulnerable to UV degradation, surface scoring, and ingress of grit or cement. The bag provides a physical barrier against all three during storage between uses.

• Yellow for site visibility: The high-visibility yellow colour makes the bag straightforward to locate on a compound stacked with materials, reducing the time operatives spend searching for equipment at the start of a shift.

• Durable polyethylene construction: The sheath material resists tearing under the weight and edge profile of a loaded pipe coil and withstands repeated handling without splitting at the seams.

What's included

1 x PE Pipe Coil Bag, suitable for PE and MDPE pipe coils from 20mm to 32mm outside diameter, in high-visibility yellow with elasticated openings and drawstring cord lock closure.

 Specifications

Who is this for?

The PE Pipe Coil Bag is used by groundworkers, utilities contractors, water mains installers, gas distribution teams, and drainage operatives working with coiled polyethylene pipe on UK construction and infrastructure sites. It is equally relevant for merchants, hire depots, and plant yards storing PE pipe coils between projects or in outdoor compounds where UV exposure and surface contamination are ongoing concerns. Anyone handling 20mm to 32mm PE or MDPE pipe coils on a regular basis will find the bag reduces handling damage and keeps coils organised without additional wrapping or strapping.

Typical applications

• Transporting 25mm or 32mm blue MDPE water mains pipe coils on site vehicles between compound and excavation without the coil unspooling or sustaining surface damage

• Storing PE pipe coils outdoors between projects, providing UV and abrasion protection where a dedicated racking system is not available

• Feeding 20mm or 25mm PE pipe from a coil into a trench or ducting run whilst keeping the remainder of the coil contained and off the ground

• Protecting coiled gas pipe in yellow MDPE during storage at a merchant or distribution yard pending issue to site

• Organising multiple pipe coils of different sizes in a vehicle or site container, where the high-visibility yellow bag makes each coil straightforward to identify and retrieve

• Preventing grit, cement dust, and site debris from entering or scoring the pipe surface during active groundwork operations

How to use

1. Open the bag fully by releasing the drawstring cord lock and stretching both elasticated openings.

2. Feed the pipe coil into the bag from the wider top opening, ensuring the coil sits flat within the bag body.

3. Pull the elasticated top opening over the top face of the coil so it seats snugly against the pipe.

4. Pull the base opening over the bottom face of the coil and tighten the drawstring cord lock until the base is secure against the coil circumference.

5. To dispense pipe on site, release or partially loosen the cord lock, feed the pipe end through the base opening, and draw the pipe out as needed. The elastication keeps the bag in position around the remaining coil.

6. After use, release both openings, remove the coil, shake out any debris, and store the bag flat or rolled for reuse on the next project.

Safety

The bag is designed for manual handling of PE pipe coils. Coils of 20-32mm PE pipe at standard lengths of 25m to 100m can be heavy: follow manual handling best practices and use mechanical assistance or a two-person lift for larger coil sizes. Do not use the bag as a lifting accessory or attach it to lifting equipment. Ensure the cord lock is fully tightened before carrying the bagged coil to prevent the coil from dropping unexpectedly. Inspect the bag for tears or split seams before each use, as a damaged bag provides reduced protection and may fail under load during transit.

Maintenance

After each use, empty the bag of any debris, grit, or standing water. If the bag is soiled with concrete, cement, or site mud, rinse with water and allow to dry fully before storing, as prolonged damp storage can degrade the material over time. Check the cord lock and drawstring for wear or cracking after heavy use and replace the bag if the closure mechanism fails. Store flat or loosely rolled in a dry location when not in use. The bag is designed for multiple reuses: inspect it before each deployment and retire it when visible tearing, split seams, or a failed closure make it unfit for purpose.

Frequently Asked Questions

Q: What pipe sizes does this bag fit?

 A: The bag accommodates PE and MDPE pipe coils with an outside diameter of 20mm to 32mm. In practice, that covers the three most common coiled pipe sizes used in UK water mains, gas distribution, and drainage groundwork: 20mm, 25mm, and 32mm. It will not seat securely on coils smaller than 20mm OD or larger than 32mm OD.

Q: Does it fit both blue MDPE water pipe and yellow MDPE gas pipe?

 A: Yes. The bag is sized for the coil diameter, not the pipe colour or application. Both blue MDPE water mains pipe and yellow MDPE gas pipe in the 20-32mm OD range are compatible, as is black PE drainage pipe of the same diameter.

Q: Can the pipe be fed out from the coil whilst it is still in the bag?

 A: Yes, and this is one of the bag's most useful site functions. The elasticated base opening and adjustable cord lock allow the pipe end to be fed through the base whilst the bag remains seated around the rest of the coil. This keeps the unused portion of the coil contained and off the ground during installation, reducing the risk of the coil unspooling across the excavation or picking up site debris.

Q: How many times can the bag be reused?

 A: The bag is designed for repeated use across multiple projects rather than single-use disposal. Service life depends on handling conditions: a bag used on a clean compound under light loads will last considerably longer than one subject to daily heavy-site use. Inspect the bag before each deployment for tears, split seams, or a failed cord lock, and retire it when any of these are present.

Q: Is this bag suitable for storing pipe coils outdoors between projects?

 A: Yes. The polyethylene sheath provides protection against UV exposure, surface abrasion, and ingress of grit and cement dust during outdoor storage. It is not a fully sealed waterproof cover, so coils stored in standing water or sustained wet conditions should be checked for moisture ingress between the bag and the pipe surface.

Q: Why is the bag yellow?

 A: The high-visibility yellow colour makes the bagged coil easy to locate on a busy site compound or in a loaded vehicle, where it might otherwise be obscured by other materials. It also provides a visual cue that the coil is protected and ready for use, which is a practical benefit when multiple operatives are drawing materials from a shared compound.

Q: Is this bag the same as standard polythene wrapping or shrink wrap?

 A: No. Standard polythene wrapping and shrink wrap are single-use disposable packaging. This bag is a purpose-designed reusable sheath with elasticated openings and a drawstring cord lock, built to be fitted and removed repeatedly without damage to the bag or the pipe. Over several projects, the per-use cost of a reusable bag is considerably lower than repeatedly purchasing disposable wrapping.

Q: Can I order these in bulk for a multi-site project?

 A: Yes. The bag is sold individually with volume pricing available at 10 to 19 units and 20 or more units. For large-scale groundwork projects or utilities frameworks requiring bulk supply across multiple sites, CMT Group can accommodate volume orders with agreed contract pricing through the EDGE procurement portal.

Q: Why order from CMT Group?

 A: The EDGE procurement portal provides agreed contract pricing, role-based spending controls, and live delivery tracking for groundwork contractors and utilities frameworks managing supply across multiple sites.