Floorsaw Blades
Floorsaw blades are large-diameter diamond blades for floor saw and road saw machines used across concrete, asphalt, road surface cutting, reinstatement, civils and groundworks. CMT Group supplies floorsaw blades across concrete, asphalt and multi-purpose application routes, including the OTEC D18P Professional Plus where listed in diameters from 350mm to 600mm ... Floorsaw blades are large-diameter diamond blades for floor saw and road saw machines used across concrete, asphalt, road surface cutting, reinstatement, civils and groundworks. CMT Group supplies floorsaw blades across concrete, asphalt and multi-purpose application routes, including the OTEC D18P Professional Plus where listed in diameters from 350mm to 600mm. Start with the material or application route, then confirm blade diameter, bore size, machine type and maximum RPM rating where stated on the product listing. Wet cutting suitability should also be checked where stated in the product data before ordering. For project quantities, repeat blade specifications or depot replenishment, CMT Group can help check suitable product options, availability and delivery requirements before you order. read more...read less
Select floorsaw blades by application, machine and project requirement
| Selection route | Use when | Specification checks | Typical options |
|---|---|---|---|
| Concrete floorsaw blades | For floor saw or road saw cutting into concrete, reinforced concrete, concrete slabs or related construction materials where concrete suitability is stated on the product listing | Material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; product data | Concrete floorsaw blade ranges where listed, including OTEC concrete floorsaw options where live product data confirms suitability |
| Asphalt floorsaw blades | For road surfaces, carriageways, footpaths, reinstatement, patching or asphalt cutting where asphalt suitability is stated on the product listing | Material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; undercut protection where stated; product data | Asphalt floorsaw blade ranges where listed; undercut protection where shown in individual product data |
| Multi-purpose floorsaw blades | For mixed-material site cutting where one blade route may need to cover more than one listed material type, or where the project spans concrete, asphalt and aggregate | Supported material range; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; product data | Multi-purpose floorsaw blade ranges where listed, including OTEC D18P Professional Plus where live product data confirms mixed-material suitability; diameters from 350mm to 600mm where listed |
| Machine and diameter matching | For narrowing a floorsaw blade by floor saw or road saw machine specification and required blade diameter before ordering | Blade diameter; bore size; machine specification; cutting depth where stated in product data; maximum RPM rating where stated; product data | Floorsaw blade options in diameters from 350mm to 600mm where listed; confirm bore size and machine compatibility on the individual product listing before ordering |
| Project quantities and repeat specifications | For framework orders, planned highways works, reinstatement programmes, depot replenishment or keeping blade specifications consistent across sites | Application route; blade diameter; bore size; SKU; pack quantity where stated; stock availability; account requirements | Repeat-order floorsaw blade specifications across concrete, asphalt and multi-purpose ranges; project quantities and depot replenishment lines |
| Range and machine comparison | For confirming whether floorsaw blades are the right product route, or whether another diamond blade range better matches the machine type and application | Machine type; blade diameter; application; cutting method; material | Floorsaw blades for floor saw and road saw machine cutting; OTEC Diamond Blades for broader OTEC product routes; Benchsaw Blades for static bench saw applications; Cutting and Grinding Discs for handheld disc work |
Frequently asked questions
Which floorsaw blade should I choose for concrete cutting?
Start with floorsaw blades listed for concrete or reinforced concrete suitability. Concrete floorsaw blades are selected for floor saw and road saw machines cutting concrete slabs, concrete road surfaces and related construction concrete where product data confirms suitability. Check blade diameter, bore size, machine type and maximum RPM rating where shown on the product listing, and confirm wet cutting suitability where stated before ordering.
For project-specific concrete cutting requirements or help matching a blade specification to a machine, speak to our team before placing your order.
When should I choose an asphalt floorsaw blade?
Choose asphalt floorsaw blades for road surfaces, carriageways, footpaths, reinstatement and patching work where asphalt suitability is stated on the product listing. Asphalt and concrete should be matched to blades listed for the correct material. Where undercut protection is shown in the product data, check this feature applies to your application before ordering.
Confirm material suitability on the individual product listing before ordering. If you are unsure which blade suits your material or machine requirement, speak to our team.
Can I use a multi-purpose floorsaw blade across mixed materials?
Some floorsaw blades may be listed for multi-purpose use where the product data confirms suitability across more than one material type. OTEC D18P Professional Plus is available where live product data confirms mixed-material suitability, in diameters from 350mm to 600mm where listed. Whether a blade covers the combination of materials on your site depends on the individual product listing and product data.
For sustained cutting of a specific material, a material-specific floorsaw blade may be more appropriate where available. Check the product data before specifying a multi-purpose blade for your project.
What should I check before ordering a floorsaw blade for a machine?
Before ordering, check blade diameter, bore size, machine type and maximum RPM rating where stated on the product listing. Wet cutting suitability should also be checked where stated in the product data. Blade diameter affects cutting depth where stated, and bore size should be checked against your floor saw machine specification. Confirm all specification checks against the product listing before purchasing.
If the product listing does not confirm compatibility with your specific machine, speak to our team before ordering.
Are floorsaw blades different from handheld diamond blades?
Floorsaw blades are large-diameter blades selected for use with floor saw and road saw machines, covering diameters from 350mm to 600mm where listed. Handheld diamond blades and cutting discs are a separate product route, typically used with angle grinders, petrol saws or cut-off saws for different machine and application requirements.
If you are looking for handheld cutting products or OTEC diamond blades across a broader range of machine types, the OTEC Diamond Blades range and the Cutting and Grinding Discs section cover those product routes.
What product data matters for project or highways orders?
Before placing a project or highways order, check: material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; pack quantity where stated; SKU; and stock availability. Where standards, ratings or approvals are shown on individual product listings or datasheets, check these against your project specification before ordering.
For projects with specific product specification or delivery requirements, speak to our team before ordering so we can confirm specification, stock and lead time.
Can CMT Group support repeat floorsaw blade specifications across sites or depots?
Yes. CMT Group supports trade accounts with repeat blade specifications, stock checks, project quantities and depot replenishment for floorsaw blades. For procurement teams or site managers specifying consistent blades across multiple sites or highways programmes, our team can verify product availability, confirm specifications and plan delivery before you commit to an order. Account holders can use the EDGE B2B Portal for repeat purchasing and order tracking.
For regular floorsaw blade requirements or framework procurement, contact our team to discuss account options and supply arrangements.
How quickly can floorsaw blades be supplied for trade or project orders?
Same-day and next-day UK delivery options are available for stocked floorsaw blades where availability allows. For larger quantities, project orders or time-critical requirements, speak to our team before ordering so we can check stock, confirm specifications and arrange delivery to your site or depot.
Contact our team in advance for urgent or high-volume requirements so supply and delivery can be confirmed before you need the blades on site.
Ordering floorsaw blades for concrete, asphalt, roadworks, reinstatement, civils, groundworks or depot replenishment? CMT Group can support trade and project accounts with product selection, stock checks, repeat blade specifications and UK delivery options. For volume requirements or project-specific specifications, speak to our team or browse the floorsaw blade range below.
UK-wide delivery
Same-day and next-day UK delivery options on stocked floorsaw blades for trade and project accounts.Stock availability
Live availability across concrete, asphalt and multi-purpose floorsaw blade ranges, subject to current stock.EDGE B2B Portal
Self-serve procurement with trade pricing, order tracking and easy repeat ordering for account holders.Project and repeat procurement
Support for project quantities, depot replenishment and repeat floorsaw blade specifications across sites and accounts.Diamond Blades, Cores & Drills
Order floorsaw blades alongside OTEC diamond blades, benchsaw blades, diamond core drilling products, cutting and grinding discs and drilling products.Shop Floorsaw Blades by Application
Floorsaw Blades
Floorsaw blades are large-diameter diamond blades for floor saw and road saw machines used across concrete, asphalt, road surface cutting, reinstatement, civils and groundworks. CMT Group supplies floorsaw blades across concrete, asphalt and multi-purpose application routes, including the OTEC D18P Professional Plus where listed in diameters from 350mm to 600mm ... Floorsaw blades are large-diameter diamond blades for floor saw and road saw machines used across concrete, asphalt, road surface cutting, reinstatement, civils and groundworks. CMT Group supplies floorsaw blades across concrete, asphalt and multi-purpose application routes, including the OTEC D18P Professional Plus where listed in diameters from 350mm to 600mm. Start with the material or application route, then confirm blade diameter, bore size, machine type and maximum RPM rating where stated on the product listing. Wet cutting suitability should also be checked where stated in the product data before ordering. For project quantities, repeat blade specifications or depot replenishment, CMT Group can help check suitable product options, availability and delivery requirements before you order. read more...read less
Select floorsaw blades by application, machine and project requirement
| Selection route | Use when | Specification checks | Typical options |
|---|---|---|---|
| Concrete floorsaw blades | For floor saw or road saw cutting into concrete, reinforced concrete, concrete slabs or related construction materials where concrete suitability is stated on the product listing | Material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; product data | Concrete floorsaw blade ranges where listed, including OTEC concrete floorsaw options where live product data confirms suitability |
| Asphalt floorsaw blades | For road surfaces, carriageways, footpaths, reinstatement, patching or asphalt cutting where asphalt suitability is stated on the product listing | Material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; undercut protection where stated; product data | Asphalt floorsaw blade ranges where listed; undercut protection where shown in individual product data |
| Multi-purpose floorsaw blades | For mixed-material site cutting where one blade route may need to cover more than one listed material type, or where the project spans concrete, asphalt and aggregate | Supported material range; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; product data | Multi-purpose floorsaw blade ranges where listed, including OTEC D18P Professional Plus where live product data confirms mixed-material suitability; diameters from 350mm to 600mm where listed |
| Machine and diameter matching | For narrowing a floorsaw blade by floor saw or road saw machine specification and required blade diameter before ordering | Blade diameter; bore size; machine specification; cutting depth where stated in product data; maximum RPM rating where stated; product data | Floorsaw blade options in diameters from 350mm to 600mm where listed; confirm bore size and machine compatibility on the individual product listing before ordering |
| Project quantities and repeat specifications | For framework orders, planned highways works, reinstatement programmes, depot replenishment or keeping blade specifications consistent across sites | Application route; blade diameter; bore size; SKU; pack quantity where stated; stock availability; account requirements | Repeat-order floorsaw blade specifications across concrete, asphalt and multi-purpose ranges; project quantities and depot replenishment lines |
| Range and machine comparison | For confirming whether floorsaw blades are the right product route, or whether another diamond blade range better matches the machine type and application | Machine type; blade diameter; application; cutting method; material | Floorsaw blades for floor saw and road saw machine cutting; OTEC Diamond Blades for broader OTEC product routes; Benchsaw Blades for static bench saw applications; Cutting and Grinding Discs for handheld disc work |
Frequently asked questions
Which floorsaw blade should I choose for concrete cutting?
Start with floorsaw blades listed for concrete or reinforced concrete suitability. Concrete floorsaw blades are selected for floor saw and road saw machines cutting concrete slabs, concrete road surfaces and related construction concrete where product data confirms suitability. Check blade diameter, bore size, machine type and maximum RPM rating where shown on the product listing, and confirm wet cutting suitability where stated before ordering.
For project-specific concrete cutting requirements or help matching a blade specification to a machine, speak to our team before placing your order.
When should I choose an asphalt floorsaw blade?
Choose asphalt floorsaw blades for road surfaces, carriageways, footpaths, reinstatement and patching work where asphalt suitability is stated on the product listing. Asphalt and concrete should be matched to blades listed for the correct material. Where undercut protection is shown in the product data, check this feature applies to your application before ordering.
Confirm material suitability on the individual product listing before ordering. If you are unsure which blade suits your material or machine requirement, speak to our team.
Can I use a multi-purpose floorsaw blade across mixed materials?
Some floorsaw blades may be listed for multi-purpose use where the product data confirms suitability across more than one material type. OTEC D18P Professional Plus is available where live product data confirms mixed-material suitability, in diameters from 350mm to 600mm where listed. Whether a blade covers the combination of materials on your site depends on the individual product listing and product data.
For sustained cutting of a specific material, a material-specific floorsaw blade may be more appropriate where available. Check the product data before specifying a multi-purpose blade for your project.
What should I check before ordering a floorsaw blade for a machine?
Before ordering, check blade diameter, bore size, machine type and maximum RPM rating where stated on the product listing. Wet cutting suitability should also be checked where stated in the product data. Blade diameter affects cutting depth where stated, and bore size should be checked against your floor saw machine specification. Confirm all specification checks against the product listing before purchasing.
If the product listing does not confirm compatibility with your specific machine, speak to our team before ordering.
Are floorsaw blades different from handheld diamond blades?
Floorsaw blades are large-diameter blades selected for use with floor saw and road saw machines, covering diameters from 350mm to 600mm where listed. Handheld diamond blades and cutting discs are a separate product route, typically used with angle grinders, petrol saws or cut-off saws for different machine and application requirements.
If you are looking for handheld cutting products or OTEC diamond blades across a broader range of machine types, the OTEC Diamond Blades range and the Cutting and Grinding Discs section cover those product routes.
What product data matters for project or highways orders?
Before placing a project or highways order, check: material suitability; blade diameter; bore size; machine type; maximum RPM rating where stated; wet cutting suitability where stated; pack quantity where stated; SKU; and stock availability. Where standards, ratings or approvals are shown on individual product listings or datasheets, check these against your project specification before ordering.
For projects with specific product specification or delivery requirements, speak to our team before ordering so we can confirm specification, stock and lead time.
Can CMT Group support repeat floorsaw blade specifications across sites or depots?
Yes. CMT Group supports trade accounts with repeat blade specifications, stock checks, project quantities and depot replenishment for floorsaw blades. For procurement teams or site managers specifying consistent blades across multiple sites or highways programmes, our team can verify product availability, confirm specifications and plan delivery before you commit to an order. Account holders can use the EDGE B2B Portal for repeat purchasing and order tracking.
For regular floorsaw blade requirements or framework procurement, contact our team to discuss account options and supply arrangements.
How quickly can floorsaw blades be supplied for trade or project orders?
Same-day and next-day UK delivery options are available for stocked floorsaw blades where availability allows. For larger quantities, project orders or time-critical requirements, speak to our team before ordering so we can check stock, confirm specifications and arrange delivery to your site or depot.
Contact our team in advance for urgent or high-volume requirements so supply and delivery can be confirmed before you need the blades on site.
Ordering floorsaw blades for concrete, asphalt, roadworks, reinstatement, civils, groundworks or depot replenishment? CMT Group can support trade and project accounts with product selection, stock checks, repeat blade specifications and UK delivery options. For volume requirements or project-specific specifications, speak to our team or browse the floorsaw blade range below.
