Non - Shrink Cementitious Grout

Webercem grout is a premixed, non-shrink cementitious grout developed for applications where a cost-efficient grout with adequateflow and strength is required. weber.cem grout is designed primarily as a pourable grout but can also be used at a plastic or dry pack consistency.

• General purpose grout suitable for use over a temperature range of between 5°C and 25°C
• Can be pumped, poured, trowelled or 'dry-packed'
• Good flow properties
• Can be applied in thicknesses ranging from 10mm to 100mm
• Factory blended to eliminate on-site errors
• Conforms to ASTM C827 Early Volume Change of Cementitious Mixtures producing a non-shrink grout
• Does not contain metallic additives such as iron or aluminium 

• Grouting under stanchions and baseplates
• General void filling, under paving, in rubble walls, etc
• Fixing balustrades, starter bars, barriers
• Underpinning

Must only be used in confined situations, e.g. under baseplates, in holes, etc.

The following test results were obtained in laboratory conditions at 20°C: