Flock lined latex household rubber gloves built for janitorial operatives, facilities management teams, and cleaning staff requiring oil and water resistant hand protection for workplace and domestic cleaning tasks.
- Flock lined interior for comfort during extended cleaning shifts
- Oil and water resistant latex construction, prevents penetration of grease, liquids, and cleaning agents
- Fishscale grip pattern across palm and fingers for secure grip on wet and soapy surfaces
- Beaded cuff for easy donning and doffing without rolling or tearing
- 300mm length for forearm coverage during sink and basin cleaning tasks
- EN ISO 21420:2020 certified, Dexterity Level 5, CE marked CAT I
- Available in 8(M), 9(L), 10(XL) sizes
- Pack of 12
Portwest Flock Lined Latex Household Rubber Gloves - Oil and Water Resistant
Flock lined latex household rubber gloves built for janitorial operatives, facilities management teams, and cleaning staff requiring oil and water resistant hand protection for workplace and domestic cleaning tasks.
- Flock lined interior for comfort during extended cleaning shifts
- Oil and water resistant latex construction, prevents penetration of grease, liquids, and cleaning agents
- Fishscale grip pattern across palm and fingers for secure grip on wet and soapy surfaces
- Beaded cuff for easy donning and doffing without rolling or tearing
- 300mm length for forearm coverage during sink and basin cleaning tasks
- EN ISO 21420:2020 certified, Dexterity Level 5, CE marked CAT I
- Available in 8(M), 9(L), 10(XL) sizes
- Pack of 12
Portwest Flock Lined Latex Household Rubber Gloves
Flock lined latex household rubber gloves designed for janitorial operatives, facilities management teams, cleaning contractors, and workplace hygiene staff handling cleaning agents, water, grease, and light liquid substances as part of daily cleaning and maintenance routines. The latex construction prevents penetration of grease, oil, and water whilst the flock lining provides the comfort required for extended wear across a full cleaning shift. The fishscale grip pattern maintains secure hold on wet, soapy, and slippery surfaces throughout the task. Certified to EN ISO 21420:2020 with Dexterity Level 5, CE marked CAT I.
How flock lining and fishscale grip combine for all-day janitorial comfort
An unlined rubber glove transmits perspiration directly against the skin during extended wear, causing discomfort and reducing the operative's willingness to maintain glove compliance across a full shift. The flock lining absorbs light moisture from the hand, allowing extended wear without the discomfort associated with bare rubber contact. The fishscale grip pattern on the outer surface creates contact points on wet, soapy, and lightly greasy surfaces where a smooth rubber surface would lose traction, maintaining control of tools, cloths, and equipment throughout cleaning and janitorial tasks.
Key Features
-
Flock lined interior: Soft textile lining inside the rubber glove absorbs light hand perspiration during extended wear and prevents the discomfort of bare rubber contact against the skin. Supports full-shift glove compliance for janitorial and cleaning operatives.
-
Oil and water resistant latex construction: The latex rubber construction prevents penetration of grease, water, cleaning agents, and light liquid substances, providing a reliable barrier for general janitorial and cleaning tasks involving sinks, surfaces, floors, and equipment.
-
Fishscale grip pattern: Textured pattern across the palm and finger surfaces creates grip contact points on wet, soapy, and slippery surfaces where a smooth latex glove would lose traction. Maintains secure hold on cleaning cloths, sponges, mops, and wet equipment.
-
Beaded cuff: Reinforced cuff bead prevents the glove from rolling down during donning and doffing, extending glove life and making rapid glove changes easier during busy cleaning shifts.
-
300mm gauntlet length: Extended length provides forearm coverage during sink cleaning, deep basin scrubbing, and immersion tasks where a standard-length rubber glove would allow water and cleaning agents to run back over the wrist.
-
CE marked CAT I, EN ISO 21420:2020 Dexterity Level 5: Certified for general mechanical risk and dexterity performance under UK PPE Regulations. Dexterity Level 5 is the highest rating on the EN ISO 21420 scale, confirming unrestricted finger movement during cleaning tasks.
Who is this for
Trades and roles:
-
Janitorial and cleaning operatives
-
Facilities management staff
-
Catering and kitchen hygiene workers
-
Domestic cleaning contractors
-
Housekeeping operatives
Industries:
-
Facilities management
-
Hospitality and catering
-
Healthcare domestic services
-
Education and public sector
-
Retail and commercial cleaning
Specifications
| Specification | Detail |
| Product name | Portwest Flock Lined Latex Household Rubber Gloves - Oil and Water Resistant |
| SKU / product code | SLHR |
| Glove category | Flock lined latex household rubber glove |
| Primary protection type | Oil and water resistant, light liquid barrier |
| EN standard | EN ISO 21420:2020 |
| Dexterity rating | Level 5, maximum |
| Certification | CE marked, CAT I |
| Material | Natural latex rubber |
| Lining | Flock lined interior |
| Grip pattern | Fishscale textured pattern, palm and fingers |
| Cuff style | Beaded cuff |
| Liquid resistance | Oil and water resistant |
| Glove length | 300mm |
| Thickness | 0.28mm |
| Sizes available | Medium, Large. X Large |
| Pack quantity | 12 |
| Colour | Yellow |
| Colour | Green liner / black nitrile coating |
Compatibility
| Application or condition | Status |
| General janitorial and cleaning tasks | ✓ Compatible |
| Kitchen and catering hygiene cleaning | ✓ Compatible |
| Sink, basin, and surface cleaning with water and detergents | ✓ Compatible |
| Light grease and oil contact during cleaning tasks | ✓ Compatible |
| Floor mopping and wet cleaning tasks | ✓ Compatible |
| Domestic and commercial housekeeping tasks | ✓ Compatible |
| Strong chemical immersion or prolonged chemical contact | ✗ Not recommended, not EN374 rated |
| Solvents, acids, or aggressive chemical handling | ✗ Not recommended |
| Cut or puncture hazard tasks | ✗ Not recommended, no EN388 rating |
| Heat or flame exposure | ✗ Not recommended |
| Electrical hazard work | ✗ Not recommended |
| Operatives with latex allergy | ✗ Not recommended, contains natural latex |
Who is this for
Flock lined latex household rubber gloves at this specification are used primarily by janitorial operatives, facilities management staff, and cleaning contractors carrying out regular workplace and domestic cleaning tasks involving water, detergents, light grease, and general liquid exposure. The 300mm length and flock lining make these gloves suited to extended cleaning shifts where comfort and forearm coverage during sink and basin work are as important as the liquid barrier performance. Procurement teams managing janitorial PPE supply for facilities management, hospitality, healthcare domestic services, and commercial cleaning operations will find these gloves meet the requirements of EN ISO 21420:2020 at Dexterity Level 5 for general-purpose cleaning tasks.
Typical applications
-
Sink and basin cleaning in commercial kitchens, healthcare facilities, and office environments where hands and forearms are regularly immersed in warm water and cleaning agent solutions.
-
Floor mopping and wet cleaning tasks in commercial, retail, and public sector environments where regular hand contact with water, detergent solutions, and wet surfaces occurs throughout the shift.
-
Surface cleaning and sanitising tasks in hospitality, catering, and healthcare domestic service environments where light grease, food residue, and cleaning chemicals are regularly handled.
-
Bathroom and toilet cleaning tasks in facilities management and janitorial environments where water, cleaning agents, and light disinfectants are used on a routine basis.
-
Kitchen hygiene and equipment cleaning tasks in catering and food service environments where grease, oils, and warm water are the primary liquid hazards.
-
General domestic and commercial housekeeping tasks involving window cleaning, surface wiping, and general wet maintenance work across office, retail, and residential environments.
How to use
Step 1: Select the correct size. Small, Medium, or Large. The correct size seats the glove snugly at the fingertips without bunching. An oversized glove reduces grip precision on wet surfaces and increases the risk of the glove slipping during use.
Step 2: Pull the glove fully over the hand using the beaded cuff as a grip point. The bead prevents the cuff from rolling or tearing during donning. Ensure all fingers are fully seated before beginning work.
Step 3: Ensure the 300mm cuff seats comfortably against the forearm before immersing hands in water or cleaning agent solutions. For tasks involving deep sinks or basins, roll up sleeves before donning to maximise forearm coverage from the glove cuff.
Step 4: After use, rinse the outside of the glove under clean water to remove cleaning agent residue, grease, and contamination before removing. Doff by peeling from the wrist, not the fingertips.
Step 5: Air dry fully before storing. Store away from direct sunlight, heat, and ozone sources which degrade natural latex.
Step 6: Inspect before each use. Check for punctures, tears, or thinning of the latex. Hold up to a light source and check for pinholes. Replace immediately when any damage is visible.
Common mistakes
-
Not checking for pinholes before use: A pinhole in the latex allows water and cleaning agents to enter the glove and contact the skin. Hold the glove up to a light source and check for any light transmission through the latex before starting work.
-
Using for strong chemical or solvent tasks: These gloves are oil and water resistant for general cleaning use. They carry no EN374 chemical barrier rating and must not be used for handling strong acids, alkalis, solvents, or aggressive chemical substances.
-
Storing near heat or ozone sources: Natural latex degrades rapidly when exposed to direct sunlight, heat sources, and ozone. Store in a cool, dark, dry location away from electrical equipment that generates ozone.
-
Using the wrong size: An oversized glove bunches at the fingertips and reduces grip on wet surfaces. An undersized glove stresses the latex and reduces service life.
-
Operatives with latex allergy using these gloves: These gloves contain natural latex. Any operative with a confirmed or suspected latex sensitivity must not use them. A nitrile household rubber glove alternative should be sourced for latex-sensitive workers.
Safety
These gloves are certified to EN ISO 21420:2020 Dexterity Level 5, CE marked CAT I. CAT I covers minimal risk products for general-purpose household and janitorial cleaning tasks. They are not suitable for strong chemical handling, solvents, or aggressive substances. They carry no EN388 cut or puncture protection rating and must not be used for tasks involving cut or puncture hazards. They are not suitable for heat, flame, or electrical hazard work. Operatives with a confirmed or suspected latex allergy must not use these gloves. Inspect before every use and replace when any damage is visible.
Maintenance
Rinse the outer surface under clean water after each use to remove cleaning agent residue and contamination. Air dry fully at room temperature before storing. Do not machine wash or expose to solvents. Store in a cool, dry location away from direct sunlight, heat, and ozone sources. Do not store compressed or folded under weight. When stored correctly the gloves will not suffer a change in performance for up to the manufacturer's recommended shelf life. Replace when any puncture, tear, pinhole, or visible thinning is identified on inspection.
Frequently Asked Questions
Q: What is the difference between a flock lined rubber glove and an unlined rubber glove for janitorial use?
A: An unlined rubber glove places the latex surface in direct contact with the skin. During extended cleaning shifts, perspiration builds up inside the glove and causes discomfort, skin maceration, and reduced compliance, operatives remove the gloves to relieve discomfort. A flock lined glove has a soft textile lining bonded to the inner latex surface that absorbs light moisture from the hand and prevents direct latex-to-skin contact. The result is a glove that can be worn comfortably throughout a full cleaning shift, which directly supports PPE compliance in janitorial and facilities management environments.
Q: What are these gloves NOT suitable for?
A: These gloves are not suitable for strong chemical handling — they carry no EN374 chemical barrier rating and must not be used with solvents, concentrated acids, alkalis, or aggressive cleaning chemicals beyond standard household and commercial detergents. They carry no EN388 cut or puncture protection and must not be used for tasks involving sharp materials. They are not suitable for heat, flame, or electrical hazard work. Operatives with a confirmed or suspected latex allergy must not use these gloves.
Q: Can these gloves be used with commercial cleaning chemicals and disinfectants?
A: These gloves are suitable for use with standard household and commercial cleaning detergents, surface sanitisers, and light disinfectants used in routine janitorial and facilities management cleaning. They are not suitable for tasks involving concentrated industrial chemicals, solvents, strong acids or alkalis, or any substance requiring EN374-rated chemical protection. When in doubt about the suitability of a specific chemical, check the COSHH assessment for the substance before specifying these gloves.
Q: Why does this glove carry EN ISO 21420:2020 Dexterity Level 5?
A: EN ISO 21420:2020 is the general requirements standard for protective gloves, covering ergonomic performance, sizing accuracy, and innocuousness of materials. Dexterity Level 5 is the highest rating on the scale, confirming that this glove does not significantly restrict finger movement or tactile sensitivity during cleaning and handling tasks. For janitorial operatives carrying out fine cleaning tasks, wiping surfaces, handling small items, operating taps and equipment, maximum dexterity rating confirms the glove does not impede normal hand function.
Q: How do I know when to replace these gloves?
A: Inspect before every use by holding the glove up to a light source and checking for pinholes, tears, or areas of visible thinning in the latex. A pinhole in the latex breaks the liquid barrier completely and the glove must be replaced immediately. Also replace when the latex surface feels tacky, sticky, or brittle, or when the flock lining begins to separate from the inner surface. Do not continue using a damaged glove, the liquid barrier is no longer intact.
Q: Are these gloves suitable for operatives with latex allergy?
A: No. These gloves are made from natural latex and must not be used by any operative with a confirmed or suspected latex sensitivity. Latex allergy reactions range from contact dermatitis to anaphylaxis. Any operative who experiences a reaction must stop use immediately and seek medical advice. A nitrile household rubber glove should be sourced as an alternative for latex-sensitive workers.
Q: How are these gloves sold and what quantities are available?
A: These gloves are sold in cartons of 240 pairs, making them suited to bulk procurement for facilities management operations, cleaning contractors, and janitorial supply across multiple sites. For procurement teams managing regular volume requirements, the CMT EDGE portal provides contract pricing, live stock visibility, and simplified bulk reordering.
Q: How quickly can I get these rubber gloves delivered to a facilities management site or depot?
A: Order by 7pm for next-day delivery nationwide at no extra cost on stocked lines. CMT Group operates its own fleet of vehicles covering over 95% of the UK mainland with live order tracking and What3Words integration for precise delivery to any site entrance or depot gate.
Q: What makes CMT Group a reliable bulk supplier of janitorial PPE gloves?
A: CMT Group holds large UK stock holdings with no backorders on core consumable lines, ensuring consistent availability for facilities management and cleaning contractor accounts. ISO 9001:2015 quality management accreditation, CHAS Elite approval, and Crown Commercial Service Supplier status are all independently verified. The EDGE procurement portal supports bulk ordering, contract pricing, and multi-site delivery management for cleaning and facilities management operations.
