13-gauge seamless polyester liner glove with flat nitrile palm coating, designed for precision assembly, inspection and manufacturing tasks in dry to lightly oily conditions.
- Ideal for automotive, plastics, assembly, and maintenance.
- Lint-free design for precision and clean environments.
- Level 4 abrasion resistance for extended life.
- EN 388:2016+A1:2018 rated 4121A; TDM cut score A
- Breathable liner reduces heat build-up and perspiration
- Seamless construction, elasticated knit wrist, 250mm length
- Available in sizes 9/L and 10/XL
- White/grey colourway
- CE CAT II PPE, EN 388:2016+A1:2018, ANSI/ISEA 105:2016 certified
Skytec Multi-Purpose Polyester Nitrile Palm Coated Glove - High Abrasion - Lint Free
13-gauge seamless polyester liner glove with flat nitrile palm coating, designed for precision assembly, inspection and manufacturing tasks in dry to lightly oily conditions.
- Ideal for automotive, plastics, assembly, and maintenance.
- Lint-free design for precision and clean environments.
- Level 4 abrasion resistance for extended life.
- EN 388:2016+A1:2018 rated 4121A; TDM cut score A
- Breathable liner reduces heat build-up and perspiration
- Seamless construction, elasticated knit wrist, 250mm length
- Available in sizes 9/L and 10/XL
- White/grey colourway
- CE CAT II PPE, EN 388:2016+A1:2018, ANSI/ISEA 105:2016 certified
The Skytec Multi-Purpose Polyester Nitrile Palm Coated Glove is a lightweight, high-abrasion assembly glove designed for UK automotive, construction and manufacturing environments where dexterity, grip and contamination control are the primary requirements. A flat nitrile palm coating protects light oils, water, snags and abrasion, while the palm-only coverage preserves the breathability and tactile sensitivity needed for component handling and precision work.
The lint-free construction is a meaningful differentiator for plastics manufacturing and inspection tasks, where fibre contamination from standard knit gloves creates rework and quality failures. Additionally, the EN 388:2016+A1:2018 Level 4 abrasion rating confirms the palm coating withstands demanding daily use, so the glove delivers both precision and durability without requiring a heavier product.
The 13-gauge seamless polyester liner keeps hands cool and reduces fatigue during extended shifts, while the elasticated knit wrist provides a secure fit and prevents debris ingress. Tested to EN 388:2016+A1:2018 and ANSI/ISEA 105:2016.
✓ The flat nitrile palm coating delivers reliable grip on dry and lightly oily surfaces without the bulk of a fully coated glove.
The smooth, close-conforming coating maintains tactile sensitivity, so operatives can handle small components, conduct examinations and perform precision assembly tasks without removing the glove. This makes it a practical choice across automotive interior assembly, plastics manufacturing and machinery operation where feel matters as much as protection.
✓ The lint-free construction prevents fibre shedding that contaminates finished surfaces and precision components.
Standard knit gloves shed fibres onto components, substrates and assemblies. This glove's lint-free design eliminates that risk, making it suitable for plastics inspection, automotive interior finishing and any application where surface cleanliness is part of the quality requirement.
✓ Level 4 abrasion resistance under EN 388:2016+A1:2018 is the highest rating achievable for a lightweight palm-coated glove.
The palm coating withstands 8,000 or more abrasion cycles in standardised testing, significantly extending glove life compared with lower-rated alternatives. For procurement managers buying at volume, longer glove life reduces replacement frequency and total cost of ownership.
✓ The breathable 13-gauge polyester liner allows air circulation that reduces perspiration and hand fatigue during extended shifts.
Unlike denser or thicker liners, the open-knit polyester construction allows heat to dissipate, keeping hands cooler during continuous wear in warm workshop or manufacturing environments.
✓ The seamless knit liner removes internal pressure points that cause skin irritation and fatigue during long-duration wear.
There are no seam ridges pressing against the skin, so the glove can be worn continuously without the discomfort that accelerates removal on site. The elasticated knit wrist maintains a secure, debris-free fit throughout a shift.
Specifications Table – EMG211
| Specification | Detail |
|---|---|
| Product Name | Skytec Multi-Purpose Polyester Nitrile Palm Coated Glove |
| Glove Style | Palm Coated |
| Liner Material | 13 Gauge Polyester |
| Coating | Flat Nitrile (Palm Only) |
| Colour | White / Grey |
| Glove Length | 250mm |
| Cuff Style | Elasticated Knit Wrist |
| Items per Pack | 10 Pairs |
| EN 388:2016+A1:2018 | 4121A |
| ANSI/ISEA 105:2016 | A1, Level 5 / Level 2 |
| EU Regulation | 2016/425 |
| Notified Body | CCQS Certification Services Limited, N.B. No. 2834 |
| EU-Type Examination Certificate | CE-PI-20240213-01-01-9A |
Variations Table – EMG211
| Size | EN ISO 21420 Glove Size | Palm Circumference | Glove Length | Unit Weight |
|---|---|---|---|---|
| 9 / L | 9 | 229mm | 250mm | 41g |
| 10 / XL | 10 | 254mm | 260mm | 43g |
Suitability Guide:
The Skytec Multi-Purpose Polyester Nitrile Palm Coated Gloves are suitable for:
- component and product assembly,
- Plastics manufacturing
- Automotive assembly,
- Precision examination and inspection,
- Machinery and plant operation,
- General maintenance and construction site operations.
Recommended Selection Table
| Task / Environment | Recommended Size | Notes |
|---|---|---|
| General site and production operatives | 9 / L or 10 / XL | Most common hand sizes in UK manufacturing and construction |
| Precision assembly, examination tasks | 9 / L | Closer fit improves tactile sensitivity on small components |
| Automotive assembly | 9 / L or 10 / XL | Both sizes suit typical workshop workforce profiles |
| Bulk mixed-workforce procurement | 9 / L and 10 / XL (Mixed) | Covers the majority of a typical site or production workforce |
Application Suitability Table - EMG211
| Application | Suitable | Notes |
|---|---|---|
| Component and product assembly (dry) | ✓ | EN 388 4121A; Level 4 abrasion, flat nitrile grip |
| Lightly oily component handling | ✓ | Flat nitrile palm resists light oils and greases |
| Precision examination and inspection | ✓ | Lint-free construction; tactile sensitivity maintained |
| Plastics manufacturing | ✓ | Lint-free; no fibre shedding onto surfaces or components |
| Machinery and plant operation | ✓ | Abrasion and snag resistance suitable for plant environments |
| General maintenance | ✓ | Multi-purpose coverage suitable for most maintenance tasks |
| Automotive assembly | ✓ | Confirmed by manufacturer for automotive applications |
| Construction site general handling | ✓ | Abrasion resistance and grip suitable for general site use |
| Heavy oil or grease submersion | ✗ | Palm-only coating; back of hand is uncoated |
| Water submersion | ✗ | Palm-only coating; not a sealed barrier glove |
| Heat or thermal applications | ✗ | No thermal rating; manufacturer explicitly excludes |
| Chemical protection | ✗ | Not rated; manufacturer explicitly excludes |
| Electrical work (live systems) | ✗ | No dielectric rating |
| Sharp blade or cut-resistant applications | ✗ | TDM cut score A (below 2N); not for bladed tasks |
| Cryogenic or extreme cold | ✗ | No cold protection rating |
| Tasks near moving machinery | ✗ | Entanglement risk; manufacturer guidance prohibits use |
Usage Guide:
Before Use
Inspect the glove for holes, cracks, tears or colour changes before each use and discard any glove showing these defects. Select the correct size using the EN ISO 21420:2020 sizing chart: too small restricts circulation and dexterity, while too large provides inadequate protection and slips during handling. Wash hands before donning. Confirm the task is within scope. This glove provides no heat, thermal, electrical or chemical protection and must not be used for tasks requiring these properties.
During Use
Avoid use near moving machinery due to entanglement risk. The flat nitrile palm coating is water and oil resistant, however only the palm is coated, so the back of the hand and fingers have no barrier protection. This glove is designed for dry to lightly oily conditions and is not suitable for submersion or heavy chemical exposure. For any chemical exposure beyond light oils, confirm compatibility through your own risk assessment.
After Use
Remove gloves promptly when signs of wear or damage appear. When removing contaminated gloves, ease left and right gloves off alternately using the gloved hand to avoid skin contact with contaminants. For reuse, wipe the palm with a damp cloth and inspect before storage. Note that performance characteristics of worn gloves may differ from original test results. Store in dry conditions in original packaging away from direct sunlight. Mechanical properties are stable for up to three years from the date of manufacture when stored correctly.
What is the EN 388:2016+A1:2018 4121A rating and what does it mean for this glove?
Level 4 abrasion (8,000+ cycles), Level 1 blade cut, Level 2 tear resistance, Level 1 puncture resistance, and TDM cut score A (below 2 Newtons). Level 4 abrasion is the highest achievable rating and confirms the palm coating withstands demanding daily use on abrasive surfaces. The A cut score means this is not a cut-resistant glove for sharp-blade work. The primary value of this glove is abrasion resistance and precision grip, not mechanical cut protection.
What does lint-free mean in practice and why does it matter for assembly and manufacturing?
Lint-free means the glove does not shed fibres during use. Standard knit gloves release loose fibres that settle on components, substrates and finished surfaces. In plastics manufacturing, automotive interior assembly and precision inspection, these fibres cause surface defects, contamination failures and rework. The flat nitrile palm coating and seamless polyester liner are constructed to minimise fibre release, making this glove suitable for environments where surface cleanliness is part of the quality standard.
Is this glove suitable for oily or wet conditions?
It is suitable for dry to lightly oily conditions. The flat nitrile palm coating resists light oils, water and greases on the palm surface. However, because only the palm is coated, the back of the hand and fingers have no barrier coating. This glove is not suitable for submersion or heavy oil exposure. For those applications, a fully coated double-dipped nitrile glove is the appropriate choice.
How does the breathable liner reduce hand fatigue during long shifts?
The 13-gauge open-knit polyester liner allows air to circulate around the hand, reducing heat build-up and perspiration during extended wear. Heat and moisture accumulation are significant causes of hand fatigue and discomfort on production lines and in workshop environments. The breathable liner addresses this without compromising fit or coating performance, making the glove more practical for continuous long-shift use than denser alternatives.
Can this glove be reused and how should it be cleaned?
Yes, it is reusable unless damaged or contaminated beyond cleaning. Wipe the palm with a damp cloth and inspect for holes, cracks, tears or colour changes before reuse. Discard any glove showing these defects. Note that the performance characteristics of worn gloves may differ from the original test results. Store in dry conditions in the original packaging away from direct sunlight. Mechanical properties are stable for up to three years from the date of manufacture when stored correctly.
Why buy nitrile palm-coated gloves from CMT Group?
CMT Group stocks the Skytec palm-coated nitrile range in both available sizes with next-day delivery on orders placed by 5pm. For manufacturing sites and construction operations with ongoing assembly glove requirements, the EDGE procurement portal provides pre-agreed pricing, per-site budget controls, approval workflows and full ERP integration, removing invoice disputes and reducing administration overhead for procurement teams. SiteHive AI-powered unmanned stores can be deployed on production sites for 24-hour operational access to PPE with automatic usage reporting and invoicing at agreed rates.
CMT Group holds CHAS Elite, ISO 9001:2015, Constructionline Gold, RISQS Verified and NetworkRail Approved accreditations, making it a compliant supplier for construction, manufacturing and utilities procurement. A fleet of 100-plus FORS Silver vehicles covers 90% of the UK mainland, with VIP 2-3 hour delivery available for urgent requirements.
