MAXTEC HSS M2 Jigsaw Blade 130mm 12 TPI - Long Reach Metal Cutting - Pack of 5

MAXTEC HSS M2 Jigsaw Blade 130mm 12 TPI

A 130mm HSS M2 jigsaw blade with 12 TPI balanced tooth configuration, designed for deep reach cutting through box section, steel pipe, thick plate, and aluminium profiles. At 130mm overall length with a 105mm working length, it is the longest blade in the MAXTEC jigsaw range, providing greater cutting depth and access into thicker materials and confined areas where shorter blades cannot complete the cut. The 12 TPI tooth pattern balances cutting speed with finish quality, sitting between the aggressive 8 TPI for maximum speed and the fine 21 TPI for thin sheet metal. HSS M2 construction provides the heat and wear resistance needed for sustained heavy-duty metal cutting on site and in workshop environments.

Why Choose the MAXTEC HSS M2 Jigsaw Blade 130mm 12 TPI

• 130mm long reach: the longest blade in the MAXTEC jigsaw range, providing 105mm working length for deep cuts into thick metal sections and hard-to-reach areas where shorter blades cannot reach.

• 12 TPI balanced performance: delivers a strong balance between cutting speed and finish quality on medium to thick metal sections, making it the versatile choice across a range of heavy metal cutting applications.

• HSS M2 construction: heat and wear resistant M2 high speed steel maintains cutting performance through sustained heavy-duty metal cutting without dulling rapidly.

• Suitable for box section and steel profiles: the blade length and 12 TPI specification cover the full range of structural metal cutting tasks encountered by fabricators and mechanical installers.

• Universal T-shank fitment: compatible with most jigsaw brands without an adaptor.

• Pack of 5: trade quantity for metal fabricators, plumbers, and mechanical installers handling heavy-duty steel and aluminium.

What's Included

• 5 x MAXTEC HSS M2 Jigsaw Blades, 130mm, 12 TPI, T-shank

 Specifications

Compatibility

Who Is This For?

Metal fabricators, plumbers, mechanical installers, and industrial maintenance teams who carry out deep reach cutting through box section, steel pipe, thick plate, and aluminium profiles where a standard length blade cannot reach or complete the cut.

Typical Applications

• Cutting steel box section and structural profiles during fabrication and installation work

• Cutting thick steel pipe and tube during plumbing and mechanical installation

• Cutting aluminium profiles and extrusions during HVAC and mechanical installation work

• Cutting thick steel plate during fabrication and structural adaptation work

• Deep reach cutting in confined areas where standard 92mm or 100mm blades cannot access

• Cutting heavy-gauge steel and aluminium during industrial maintenance work

How to Use

1. Confirm your jigsaw accepts universal T-shank fitment before fitting.

2. Insert the blade into the jigsaw clamp and secure firmly before operating.

3. Set the jigsaw to a low speed with zero orbital setting for thick metal cutting.

4. Apply cutting lubricant to the blade and cut line before starting.

5. Apply steady forward pressure without forcing through thick metal sections.

6. Withdraw periodically to clear metal swarf from the tooth gullets on deep cuts.

7. Replace when teeth show visible wear or cutting performance deteriorates.

Safety

• Eye protection to EN 166 is mandatory for all jigsaw metal cutting operations.

• Wear cut-resistant gloves to EN 388 when handling metal sections and fitting blades.

• Secure the metal workpiece firmly before cutting to prevent movement and vibration.

• Never exceed the jigsaw manufacturer's recommended speed for metal cutting.

• Deburr cut metal edges after cutting as they present a laceration risk.

• Take extra care managing breakthrough torque on deep cuts through thick metal sections.

Maintenance

• Inspect teeth before each use for chipping or damage.

• Apply cutting lubricant during use to reduce heat build-up on deep metal cuts.

• Clean metal swarf from the blade after each use before storage.

• Store blades flat in a dry environment to prevent corrosion.

• Replace when cutting performance deteriorates rather than forcing a worn blade.

Frequently Asked Questions

Q: Why choose the 130mm blade over the 100mm blade for metal cutting?

 A: The 130mm blade provides 105mm of working length compared to 75mm on the 100mm blade. This is the correct choice when cutting depth exceeds what a shorter blade can reach in a single stroke, or when cutting in confined areas where the longer blade provides better access and leverage on thick metal sections.

Q: What is the difference between 12 TPI and 8 TPI for metal cutting?

 A: The 8 TPI blade cuts faster but leaves a rougher edge, suited to thick structural steel where speed matters more than finish. The 12 TPI blade cuts slightly slower but produces a cleaner finish, making it the balanced choice for box section, aluminium profiles, and medium to thick steel where both speed and cut quality are required.

Q: Should I use cutting lubricant with this blade?

 A: Yes. On deep cuts through thick metal, heat build-up at the tooth tips is the primary cause of premature blade wear. Applying cutting lubricant before and during the cut reduces heat, extends blade life, and produces a cleaner cut edge.

Q: Can this blade cut aluminium profiles?

 A: Yes. The 12 TPI HSS M2 specification handles aluminium profiles and extrusions effectively. Apply cutting lubricant and use a low speed setting to prevent aluminium swarf from loading the tooth gullets during the cut.

Q: Will this blade fit my jigsaw?

A: The universal T-shank fitment is compatible with most jigsaw brands sold in the UK. Confirm your jigsaw accepts T-shank blades before ordering.

Q: Why should I order from CMT Group?

 A: CMT Group has supplied UK construction sites since 2010 with next working day delivery on a FORS Silver accredited fleet covering 90% of the UK mainland. Orders placed online by 7pm qualify for next day delivery. CMT's EDGE portal provides agreed contract pricing for trade accounts.