The Battery Resin Applicator Gun is a 7.2 V lithium-powered dispensing tool designed for professional chemical anchor resin installation using 400 ml cartridges.
- Dosatron dosing system: precise and uniform resin output, reducing waste and improving installation consistency
- 7.2 V lithium battery: cordless operation reduces fatigue versus manual applicators on high-volume fixing work
- Compatible resins: MAXFIX V4 Vinylester, H4 Hybrid and P4 Polyester in 400 ml cartridges
- Ergonomic design: balanced weight distribution for comfortable handling during prolonged use
- Supplied with: durable carry case for transport, storage and site protection
- Applications: structural fixing, mechanical and electrical anchoring, concrete and masonry
- Cartridge format: 400 ml chemical anchor cartridges
Battery Resin Applicator Gun - 7.2 V and 400 ml
The Battery Resin Applicator Gun is a 7.2 V lithium-powered dispensing tool designed for professional chemical anchor resin installation using 400 ml cartridges.
- Dosatron dosing system: precise and uniform resin output, reducing waste and improving installation consistency
- 7.2 V lithium battery: cordless operation reduces fatigue versus manual applicators on high-volume fixing work
- Compatible resins: MAXFIX V4 Vinylester, H4 Hybrid and P4 Polyester in 400 ml cartridges
- Ergonomic design: balanced weight distribution for comfortable handling during prolonged use
- Supplied with: durable carry case for transport, storage and site protection
- Applications: structural fixing, mechanical and electrical anchoring, concrete and masonry
- Cartridge format: 400 ml chemical anchor cartridges
Order 1x to earn 499 FASTPoints
Order to earn 499 FASTPoints
Log in to access trade discountsBattery Resin Applicator Gun
Manual resin applicator guns work, but they slow down high-volume fixing work and fatigue operatives over a full day of anchoring. The Battery Resin Applicator Gun eliminates that problem. Powered by a 7.2 V lithium battery and fitted with a dosatron dosing system, it dispenses MAXFIX chemical anchor resin at a consistent, controlled rate with every trigger pull, removing the variable pressure and uneven output that manual guns produce. Designed for 400 ml MAXFIX cartridges, it covers the full MAXFIX chemical anchor range and arrives in a durable carry case ready for site use.
Why choose the MAXFIX Battery Resin Applicator Gun
-
Dosatron dosing system: Controls resin output precisely with each trigger pull, ensuring consistent cartridge ratios are maintained throughout. Manual applicators rely on hand pressure, which varies between operatives and affects bond quality. The dosatron removes that variable entirely.
-
7.2 V lithium battery operation: Eliminates the hand and wrist fatigue associated with manual applicators on high-volume anchor installations. On a project requiring dozens of fixings per day, battery operation makes a measurable difference to installation speed and operator comfort.
-
Compatible with the full MAXFIX cartridge range: Works with MAXFIX V4 Vinylester, H4 Hybrid and P4 Polyester resins in 400 ml format, covering concrete, masonry, solid brick, perforated brick, and stone anchoring applications with one tool.
-
Smooth trigger control: Provides accurate start and stop application without the surging or dripping that affects lower-quality battery guns. Reduces resin waste per installation and keeps anchor holes clean.
-
Ergonomic, balanced design: Weight distribution is set for comfortable one-handed use at different angles, including overhead and below-ground fixing positions where manual guns become unwieldy.
-
Supplied in a durable carry case: Protects the gun and battery in transit and on-site storage. Keeps the tool organised and ready for use without loose components.
What's in the box?
-
1 x MAXFIX Battery Resin Applicator Gun
-
1 x 7.2 V lithium battery
-
1 x durable carry case
Specifications
| Specification | Detail |
|---|---|
| Product Name | Battery Resin Applicator Gun - 7.2 V and 400 ml |
| Product Code | SA010001 |
| Power Source | 7.2 V Lithium Battery |
| Dosing System | Dosatron Precision Dosing |
| Cartridge Compatibility | MAXFIX V4 Vinylester, H4 Hybrid and P4 Polyester Resins |
| Cartridge Format | 400 ml Chemical Anchor Cartridges |
| Operation | Battery-Powered Cordless |
| Trigger | Smooth Trigger Control for Accurate Application |
| Handle Design | Ergonomic with Balanced Weight Distribution |
| Supply | Supplied in Durable Carry Case |
| Applications | Structural Fixing, Mechanical, Electrical and Anchoring |
| Suitable Substrates | Concrete, Masonry, Solid and Perforated Brick, Stone |
Compatibility
| Compatible with | Status |
|---|---|
| MAXFIX V4 Vinylester Resin - 400 ml cartridge | Compatible |
| MAXFIX H4 Hybrid Resin - 400 ml cartridge | Compatible |
| MAXFIX P4 Polyester Resin - 400 ml cartridge | Compatible |
| Concrete, masonry, solid brick and stone substrates | Compatible |
| Perforated brick and hollow substrates (with sleeve) | Compatible |
| Standard 400 ml coaxial chemical anchor cartridges | Compatible |
| 310 ml standard sealant cartridges | Not recommended |
| Non-MAXFIX 380 ml cartridges | check compatibility before use |
Who is this for?
Structural fixers, contractors, and site operatives working on high-volume chemical anchor installations where manual applicator fatigue and inconsistent output are real productivity constraints. Suited to mechanical and electrical contractors, civil engineers, and groundworkers using MAXFIX resin systems on concrete, masonry, and brickwork substrates.
Typical applications
-
Chemical anchor installation for threaded rods and bolts into concrete and masonry
-
Rebar dowel connection and starter bar fixing in concrete frames
-
Structural bracket and base plate anchoring on commercial and industrial projects
-
Mechanical and electrical equipment fixing into concrete walls, floors and ceilings
-
Safety barrier, handrail and guardrail post anchoring
-
High-volume anchor installation where manual applicator fatigue affects consistency
How to use
-
Charge the 7.2 V lithium battery fully before first use.
-
Insert the MAXFIX 400 ml resin cartridge into the gun barrel and secure.
-
Attach the correct mixing nozzle for the resin type being used.
-
Dispense a short primer shot to waste until the mixed resin colour is uniform. This purges the nozzle and confirms correct mixing ratio.
-
Insert the nozzle to the base of the drilled hole and apply resin whilst withdrawing steadily to fill from the bottom up, avoiding air pockets.
-
Insert the anchor element within the resin's open time and avoid disturbing until the full cure time has elapsed.
-
After use, leave the mixing nozzle in place to seal the cartridge. Do not remove the nozzle until the next use.
Safety
Wear appropriate PPE during resin application: chemical-resistant gloves, safety glasses or goggles, and respiratory protection if working in confined or poorly ventilated spaces. MAXFIX resin systems generate heat during cure in deep holes: do not touch anchor elements immediately after installation. Keep the gun pointed away from personnel when the trigger is engaged. Always refer to the MAXFIX resin safety data sheet for specific handling and first-aid information for the cartridge type in use.
Maintenance
After each session, leave the used mixing nozzle attached to seal the cartridge tip. Do not pull the plunger back manually as this can introduce air into the cartridge. Wipe the gun barrel and external surfaces with a clean cloth after each use. Charge the battery after use to maintain cell condition. Store in the supplied carry case with the battery attached to protect both the gun and battery terminals from site contamination.
Frequently Asked Questions
Q: What is a dosatron dosing system and why does it matter?
A: A dosatron system controls the volume of resin dispensed with each trigger pull using a positive displacement mechanism rather than relying on hand pressure alone. This ensures consistent output regardless of the operator, which is critical for chemical anchoring where an incorrect resin-to-hardener ratio affects bond strength and may invalidate the anchor's load rating.
Q: Which MAXFIX resins are compatible with this gun?
A: The gun is designed for MAXFIX V4 Vinylester, H4 Hybrid, and P4 Polyester resins in 400 ml cartridge format. These cover the main fixing applications from general anchoring in dry concrete through to chemically aggressive environments requiring vinylester specification.
Q: Why choose a battery gun over a manual resin applicator?
A: Manual guns require sustained hand and wrist force to push resin through thick-viscosity 400 ml cartridges. On a job requiring 50 or more anchors, this causes fatigue and leads to inconsistent application speed, which affects whether the resin fills the hole correctly before the anchor is inserted. The battery motor maintains consistent pressure throughout the cartridge, regardless of how many fixings have already been installed.
Q: How long does the 7.2 V battery last between charges?
A: Battery life varies with resin viscosity and cartridge fullness. Higher-viscosity resins such as vinylester require more motor effort per trigger pull. Charging the battery fully before each working session and carrying it stored in the case between uses will maintain cell performance over the battery's service life.
Q: Can I use non-MAXFIX 400 ml cartridges with this gun?
A: The gun is sized for standard 400 ml coaxial chemical anchor cartridges. Compatibility with non-MAXFIX cartridges depends on the cartridge's outer diameter and ratio. Always verify fit before use on site.
Q: Do I need to prime the nozzle before each cartridge?
A: Yes. Dispense a short amount to waste at the start of each new mixing nozzle until the dispensed resin shows a consistent, uniform mixed colour. This confirms the two components are correctly proportioned. Skipping the primer shot risks applying unmixed or poorly mixed resin into the first fixing hole.
Q: What does the carry case include?
A: The carry case is supplied with the gun and battery and is designed to protect both in transit and on-site storage. It keeps the dispenser organised and ready for use, reducing the risk of damage to the battery terminals and trigger mechanism from loose tools or site debris.
Q: Where can I order the MAXFIX Battery Resin Applicator Gun and what are the delivery options?
A: The Battery Resin Applicator Gun (SA010001) is available at cmt.co.uk. CMT Group operates a fleet of over 100 vehicles covering 90% of the UK mainland with next working day delivery on orders placed by 7pm online. VIP dedicated delivery is available UK-wide for urgent site requirements, dispatched within 30 minutes. Trade accounts and EDGE portal ordering are available for procurement teams requiring agreed pricing and full order visibility.
