GRP Grating Yellow - Anti-Slip Composite Walkway & Flooring

Who is this for

This grating suits facilities managers, industrial maintenance teams, and offshore or marine operatives specifying anti-slip walkways, platforms, and flooring in wet, oily, or high traffic environments. It is intended for use wherever standard flooring or steel grating presents a slip hazard, including situations where a hazard zone or walkway route needs to be visually distinct.

Typical applications

• Constructing raised platforms and walkways in industrial plants and processing facilities.

• Providing anti-slip flooring on offshore platforms and marine environments exposed to constant moisture.

• Marking hazard zones or high-visibility walkway routes using the yellow colour.

• Flooring dockyards and other wet, high-traffic industrial environments.

• Replacing corroded steel grating with a lightweight, non-conductive alternative.

How to use

Step 1: Measure the installation area and select the appropriate panel size and thickness from the available range.
Step 2: Cut panels on site to suit individual layout requirements.
Step 3: Fix panels to the supporting structure using appropriate clips or fixings suited to the application.
Step 4: Check panels are securely fixed and sit flush with adjoining sections before bringing the area into use.
Step 5: Inspect periodically for wear, damage, or loose fixings as part of routine site maintenance.

Common mistakes

• Selecting a thickness insufficient for the span or load being supported, rather than checking structural requirements first.

• Cutting panels without appropriate tools or precautions, risking damage to the grit top surface.

• Leaving panels loosely fixed rather than properly secured to the supporting structure.

• Ignoring wear or damage over time, particularly in high traffic or heavy load areas.

• Assuming every size and thickness combination is available in yellow, when the 996 x 996 x 38mm size currently is not.

Safety

This grating is designed for anti-slip walkway and flooring applications in wet, oily, or high traffic environments. Ensure panels are correctly fixed to the supporting structure and rated for the load and span involved before bringing an installation into use.

Maintenance

Clean periodically using a stiff brush to remove dirt and debris, using a mild detergent and warm water for more stubborn contamination. Inspect fixings, panel condition, and the grit top surface periodically, particularly in high traffic or heavy load areas.