Compact wall mounted dispenser that holds 400ml of liquid soap or hand sanitiser, refillable to suit smaller washrooms.
- Compact 400ml capacity, ideal for small spaces
- S-shaped design, manual pump action
- Refillable, bulk fill design reduces waste
- Stores liquid soap or hand sanitiser gel
- Easy to clean, wipeable white finish
- Wall mounted, straightforward installation
Wall Mounted Soap Dispenser 400ml - Compact Refillable Design
Compact wall mounted dispenser that holds 400ml of liquid soap or hand sanitiser, refillable to suit smaller washrooms.
- Compact 400ml capacity, ideal for small spaces
- S-shaped design, manual pump action
- Refillable, bulk fill design reduces waste
- Stores liquid soap or hand sanitiser gel
- Easy to clean, wipeable white finish
- Wall mounted, straightforward installation
Order 1x to earn 12 FASTPoints
Order to earn 12 FASTPoints
Log in to access trade discountsWall Mounted Soap Dispenser 400ml
Compact wall mounted dispenser built to hold 400ml of liquid soap or hand sanitiser gel, designed for smaller washrooms, offices and welfare points where a full sized dispenser isn't needed. The S-shaped white housing wipes clean easily, and the refillable bulk fill design keeps ongoing costs lower than replacing single-use bottles. A manual pump action delivers consistent dosing in a smaller footprint.
How a compact dispenser suits smaller hygiene points
A larger dispenser takes up more wall space and holds far more product than a small washroom, single cubicle, or low traffic office point actually needs, leaving product sitting unused for longer between refills. That extra capacity isn't always an advantage, in lower traffic settings, it just means a bigger fitting on the wall. This 400ml dispenser matches capacity to the space, giving smaller hygiene points a properly sized fitting without wasted capacity or unnecessary bulk.
Key Features
-
Compact 400ml capacity: Sized for smaller washrooms, single cubicles and low traffic hygiene points where a full sized dispenser isn't needed.
-
Refillable bulk fill design: Tops up from a larger supply rather than replacing single-use bottles, reducing ongoing cost and waste.
-
S-shaped housing: Compact profile suited to tighter wall spaces without compromising on capacity.
-
Manual pump action: Delivers consistent dosing with each use.
-
Stores liquid soap or hand sanitiser gel: Not locked to a specific product, giving flexibility over what's used to fill it.
-
Wipeable white finish: Easy to keep clean and presentable in daily use.
Who is this for
Trades and roles:
-
Facilities managers
-
Office and workplace managers
-
Welfare unit operators
-
Cleaning and janitorial teams
-
Site managers
Industries:
-
Facilities management
-
General workplace hygiene
-
Construction and site welfare
-
Education and community
-
Hospitality and accommodation
Specifications
| Specification | Detail |
| Product Name | Wall Mounted Soap Dispenser 400ml - Compact Refillable Design |
| SKU | BC400 |
| Brand | CMT FLX |
| Mounting Type | Wall mounted |
| Capacity | 400ml |
| Dispensing Action | Manual pump |
| Refill Type | Refillable, bulk fill |
| Compatible Products | Liquid soap, hand sanitiser gel |
| Colour | White |
Compatibility
| Application or condition | Status |
| Bulk fill liquid soap | ✓ Compatible |
| Bulk fill hand sanitiser gel | ✓ Compatible |
| Small washrooms and low traffic hygiene points | ✓ Compatible |
| High traffic areas needing infrequent refilling | ✗ Not recommended |
| Outdoor unprotected wall mounting | ✗ Not recommended |
| Thick or viscous products not designed for pump dispensing | ✗ Not recommended |
Who is this for
This dispenser is used by facilities and office managers fitting out smaller washrooms, single cubicles and low traffic hygiene points where a full sized dispenser would be oversized. Welfare unit operators use it for compact site cabins with limited wall space, while cleaning teams appreciate the smaller refill volume for locations that don't need frequent servicing. It suits any setting needing a properly sized hygiene fitting rather than a bulkier full capacity unit.
Typical applications
-
Fitting smaller washrooms, single cubicles and compact site cabins.
-
Stocking low traffic office and welfare points with soap or sanitiser.
-
Supporting workplace hygiene protocols in spaces with limited wall room.
-
Providing a properly sized hygiene fitting where a larger dispenser would be unnecessary.
-
Equipping community and communal spaces needing a compact hygiene point.
How to use
Step 1: Mount the dispenser securely to the wall using the fittings provided.
Step 2: Open the reservoir and fill with the required amount of liquid soap or hand sanitiser gel.
Step 3: Close the reservoir securely before use.
Step 4: Operate the pump action to dispense product for each use.
Step 5: Refill as needed when the level runs low.
Common mistakes
-
Fitting this dispenser in a high traffic area expecting the same refill interval as a larger capacity unit.
-
Using a product too thick or viscous for the pump mechanism to dispense properly.
-
Mounting the dispenser in an area exposed to direct weather without protection.
-
Delaying refills until the dispenser runs completely empty, leaving a hygiene point out of action.
Safety
Ensure the dispenser is mounted securely to the wall before use, since a loose fitting can fail under repeated pump action. Only use products intended for pump dispensing, thick or unsuitable products can clog the mechanism. Keep the reservoir topped up in regularly used locations.
Maintenance
Wipe the housing down regularly to keep it clean and presentable. Check the pump mechanism periodically for smooth operation. Refill before the reservoir runs completely empty to keep the dispenser consistently available.
Frequently Asked Questions
Q: Can this dispenser be used for both soap and hand sanitiser?
A: Yes, the reservoir isn't locked to a specific product, so it can be filled with either liquid soap or hand sanitiser gel depending on what the space needs.
Q: Is there a specific standard this dispenser is manufactured to?
A: There's no specific EN standard covering dispensers of this type, since it's a general hygiene fitting rather than certified equipment. The key specifications to check are capacity, refill type and housing material.
Q: What is this dispenser NOT suitable for?
A: This compact 400ml dispenser isn't best suited to high traffic areas needing infrequent refilling, a larger capacity dispenser is the better fit there. It also isn't intended for outdoor mounting without weather protection, and thick or unsuitable products can clog the pump mechanism.
Q: Why choose this 400ml size over a larger dispenser?
A: This size suits smaller washrooms, single cubicles and low traffic points where a larger dispenser would be unnecessarily bulky and hold far more product than the space actually uses. It gives a properly sized fitting rather than an oversized unit on a small wall space.
Q: How do I know when the dispenser needs refilling?
A: Check the reservoir level periodically as part of a routine hygiene check. In lower traffic settings, refill frequency will naturally be less than a high footfall location.
Q: How easy is it to refill?
A: Refilling is straightforward and doesn't require professional servicing, making it easy for cleaning or facilities staff to top up as part of routine maintenance.
