MAX Fast Mix 150 Portable Cement Mixer 130L – 110V Electric Engine with Steel Stand

The MAX Fast Mix 150 (PL030001) is a 110V electric portable cement mixer designed for professional use on UK construction sites, groundworks operations, bricklaying projects and civil engineering works where HSE voltage compliance is non-negotiable.

The compliance problem it solves is familiar to any procurement team or site manager working on managed UK sites. 240V portable tools and machinery are prohibited on the majority of Tier 1 and professionally managed sites without the use of bulky, inconvenient step-down transformers. The MAX Fast Mix 150 runs at 110V centre-tapped-to-earth (the site-safe standard) and can be connected directly to any standard 110V transformer supply or spider box. It arrives on site compliant, with no workarounds required.

The second operational problem it addresses is stability. Budget cement mixers, particularly lightweight domestic-grade models imported without site-use testing, vibrate dangerously when fully loaded. Under load, an unstable mixer can tip, spill mix, damage the drum or create a slip hazard. The MAX Fast Mix 150 is supplied with a purpose-designed demountable 4-leg steel stand that distributes load across all four ground contact points. The result is a stable mixing platform on both level concrete and the uneven, compacted ground conditions found on active construction sites. The stand positions the drum at the correct discharge height for tipping directly into a wheelbarrow, reducing stooping, operator fatigue and spillage during extended mixing sessions.

With a 130-litre drum (90L effective batch volume) and a rated output of 1m³ per hour, the MAX Fast Mix 150 delivers a meaningfully higher yield than standard portable mixers in the 100–120L class. For groundwork teams laying footings, bricklayers running continuous mortar supply, or civils crews applying screed or render, the throughput difference is significant across a full working day.

The reinforced steel drum, opening ring and frame are built to absorb the loading cycles of commercial site work. The drum rotation system is driven without a gear-ring crown, removing the component most commonly responsible for wear failures on budget competitors. Two welded internal mixing blades ensure a consistent, homogeneous mix on every cycle.

When the job is done, the stand detaches without tools and the mixer packs down to 1,300 x 600 x 940 mm, a footprint that fits comfortably in a standard Transit van alongside other site equipment. For multi-site groundwork contractors, bricklaying gangs and plant hire companies managing rotating equipment fleets, the logistical efficiency is a material operational benefit.

✓ 110V Site-Compliant Electric Engine:

 Eliminates the 240V compliance risk on Tier 1 and professionally managed UK sites. Connects directly to any standard 110V CTE site supply or transformer spider box, with no additional step-down equipment required.

✓ High-Yield Output of 1m³/Hour:

 Rated mixing capacity of one cubic metre per hour supports sustained pours on groundworks, bricklaying and civils operations, maintaining productivity across long mixing sessions without output degradation.

✓ 130L Drum with 90L Effective Mixing Volume:

Total drum volume of 130 litres with a working batch capacity of 90 litres per cycle, delivering significantly higher throughput per batch compared to standard 100–120L portable mixers in the same class.

✓ Demountable 4-Leg Steel Stand Included as Standard:

 Provides an exceptionally stable base, distributing load across all four feet to resist tipping even on uneven ground when fully loaded. Detaches in minutes for loading into a van without tools.

✓ Reinforced Structure, Drum and Opening Ring:

Heavy-gauge steel construction throughout. The drum and boca (opening) are reinforced to resist the impact loads that destroy lighter domestic-grade drums after a few hundred batches.

✓ 2 Welded Internal Mixing Blades with No Gear-Ring Drive:

 The two welded blades deliver thorough, homogeneous mixing across all mix types. Removing the gear-ring crown eliminates a common failure point and reduces ongoing maintenance requirements.

✓ Position Lock / Drum Tilt Lock:

 Locks the drum at any discharge angle, giving the operator precise, single-handed control when emptying into a barrow or skip.

✓ Compact, Transit-Ready Packed Dimensions:

 At 1,300 x 600 x 940 mm packed, the mixer occupies the footprint of a large wheelbarrow in a Transit van, making it ideal for multi-site contractors and plant hire firms managing rotating equipment fleets.

✓ CE Marked and Machinery Directive Compliant:

Manufactured to EU Machinery Directive standards and supplied assembled, ready to deploy on arrival to site.

Specifications Table – MAX Fast Mix 150 Portable Cement Mixer 130L - PL030001 

Application:

The MAX Fast Mix 150 Portable Cement Mixer (PL030001) is suitable for:

• Tier 1 and professionally managed UK construction sites
• Groundworks and foundations
• Bricklaying and blockwork
• Civil engineering and infrastructure projects
• Screeding and floor levelling
• Rendering and plastering
• Plant hire fleet operations
• Multi-site contracting and groundwork gangs
• Facilities management and estates maintenance

Application suitability table:

Usage Guide:

Before Use:

Check the drum, opening ring and frame for visible damage before each session. Confirm the stand legs are fully engaged and stable on the ground surface. Ensure the position lock is functioning correctly. Verify the 110V power supply is available and that the cable and plug are undamaged before connecting.

During Use:

Operate within the 90L effective batch capacity. Do not overload the drum beyond the rated volume. Keep bystanders clear of the rotating drum during operation. For construction chemicals or specialist products, verify compatibility with the drum material and relevant SDS before mixing. Do not leave the mixer running unattended.

After Use and Cleaning:

Discharge all the mix from the drum fully before stopping. Rinse the drum and blades thoroughly with clean water immediately after use to prevent mix hardening on the internal surfaces. Do not use solvents or high-pressure washers directly on the motor. Allow to dry before storage.

Storage:

 Detach the stand and pack to 1,300 x 600 x 940 mm for transit or storage. Store in a dry, covered location. Do not leave the drum under load or under tension when not in use. Ensure the power cable is coiled and protected from damage during storage.

Is the MAX Fast Mix 150 suitable for use on a UK Tier 1 construction site?

Yes. The MAX Fast Mix 150 operates at 110V centre-tapped-to-earth, which is the voltage standard required on the vast majority of professionally managed and Tier 1 UK construction sites. It connects directly to any standard 110V site supply or transformer spider box and can be deployed immediately without any additional voltage conversion equipment.

What is the difference between a 110V and a 240V cement mixer for site use?

240V portable equipment is prohibited on most professionally managed UK construction sites without a step-down transformer, as 240V poses a significantly higher shock risk in wet, outdoor and exposed conditions. 110V CTE supplies the voltage at earth so that the maximum shock voltage is 55V rather than 240V, which is the standard mandated by HSE guidance and most Tier 1 principal contractor site rules. The MAX Fast Mix 150 is a 110V unit and is therefore site-compliant as standard.

What is the effective mixing capacity of the MAX Fast Mix 150?

The drum has a total volume of 130 litres and an effective mixing capacity of 90 litres per batch. The rated production output is 1 cubic metre per hour, making it one of the higher-yield units in the portable cement mixer class.

Does the MAX Fast Mix 150 come with a stand?

Yes. A demountable 4-leg steel stand is supplied as standard with every unit. The stand provides a stable four-point base that resists tipping when the drum is fully loaded and positions the drum at the correct height for discharging directly into a wheelbarrow. It detaches in minutes without tools for compact storage and transit.

Will the MAX Fast Mix 150 fit in a Transit van?

Yes. Packed dimensions are 1,300 x 600 x 940 mm (L x W x H), which fit comfortably in the load area of a standard long-wheelbase Transit van alongside other site equipment. The detachable stand reduces the packed footprint further.

Can the Fast Mix 150 be used without the stand?

Yes. The unit can operate on its two wheels without the stand, which is useful when positioning against a wall or where a lower drum height is preferred. For full stability and optimum discharge height, use with the stand is recommended.

What mixes is the MAX Fast Mix 150 suitable for?

Concrete, mortar, screed, render and similar site mixes. The two welded internal mixing blades handle a wide range of aggregate sizes and mix consistencies up to the drum's 90L effective capacity. For specialist construction chemicals or proprietary compound mixes, verify compatibility with the specific product's SDS before use.

Why buy the MAX Fast Mix 150 from CMT?

CMT Equipment is the UK's largest independent site equipment supplier, serving over 11,000 trade customers across construction, civils, plant hire and groundworks. As a BSIF Registered Safety Supplier and holder of CHAS Elite, ISO 9001:2015, Constructionline Gold and Crown Commercial Service accreditations, CMT sources equipment to the professional compliance standards UK trade buyers require. CMT offers trade account pricing, bulk purchasing support and the EDGE procurement portal for B2B e-procurement integration, with delivery covering 95% of the UK.