- 410ml
- Fast gelling & curing
- Used in wet and dry conditions & flooded holes
- Extremely versatile economically fixing resin
- High bond strength 10:1 ratio chemial anchoring resin system
- Use with MET410 applicator gun
- Nozzle
MAX EPSF Resin 410ml & Nozzle
Code
MAXCR
In stock
- 410ml
- Fast gelling & curing
- Used in wet and dry conditions & flooded holes
- Extremely versatile economically fixing resin
- High bond strength 10:1 ratio chemial anchoring resin system
- Use with MET410 applicator gun
- Nozzle
Epoxy Acrylate Styrene Free Chemical Anchor Resin - 410ml
MAX Epoxy Acylate is a 2 component high strength 10:1 ratio chemical anchoring resin system. It is designed as a fast curing high strength resin fixing anchor for high loads & medium loads and is particularly advantageous for fixings in damp environments or with chemical exposure.
Key Benefits:
- High bond strength with high load resistance
- Used with all grades of threaded rod and rebar
- Used in concrete & masonry
- Fast gelling & curing
- Used in wet/dry concrete and flooded holes
- Resistance to chemicals and damp conditions
- Close edge distance & small spacing
- European approval for use in masonry with nylon sleeves
- Economical fixing resin & extremely versatile
- Styrene Free with low odor
- Manual cleaning up to 20mm diameter and embedment depths of 240mm
- Independently tested & approved
Specification:
- 18/0800 - ETA EAD 330499-00-0601 M8-M24 Threaded Rods 8-25mm Rebar
- 18/0799 - ETA EAD 330076-00-0804 M6-M12 Masonry Installations
- CE Certified 1404-CPR-3054/3053 - ZAG, Solvenia
- Tested according to LEED 2009 EQ c4.1, SCAQMD rule 1168(2005)
- WRAS approved for use with potable drinking water no. TBA
- A+ Rating VOC content
