Full brim hi-vis helmet sunshade neck cape built for groundworkers, highways operatives and site crews working long shifts in direct sun.
-
Full brim design shades the face, ears and neck in one fitting
-
Breathable mesh fabric promotes airflow and reduces heat build-up
-
Four point fixing system for a secure, stable attachment
-
Hi-vis orange body improves visibility on site
-
Fits most standard safety helmets
-
Available in bulk cartons upon request
Hi-Vis Helmet Sunshade Neck Cape - Full Brim Design
Full brim hi-vis helmet sunshade neck cape built for groundworkers, highways operatives and site crews working long shifts in direct sun.
-
Full brim design shades the face, ears and neck in one fitting
-
Breathable mesh fabric promotes airflow and reduces heat build-up
-
Four point fixing system for a secure, stable attachment
-
Hi-vis orange body improves visibility on site
-
Fits most standard safety helmets
-
Available in bulk cartons upon request
Order 1x to earn 999 FASTPoints
Order to earn 999 FASTPoints
Log in to access trade discountsHi-Vis Helmet Sunshade Neck Cape - Full Brim Design
Full brim helmet sunshade built for groundworkers, highways operatives, utilities crews and landscapers spending long shifts outdoors in direct sun. Unlike a standard back-of-neck cape, the wide brim shades the face and ears as well as the neck, whilst the breathable mesh curtain keeps airflow moving through the shift. Four-point fixing keeps the sunshade seated on the helmet through movement and wind, rather than relying on a single strap or elastic band.
How full brim coverage solves the gap a standard neck cape leaves
A standard neck cape only shields the back of the neck, leaving the face, ears, and sides of the head exposed to direct sun for the length of a shift. Over a full working day this leads to sunburn on the ears and face, glare-related eye strain, and a greater risk of heat stress in summer conditions. The full brim design extends coverage around the entire head, shading the face and ears alongside the neck, whilst the four-point fixing keeps it secured through bending, turning and wind exposure.
Key Features
- Full brim coverage: Shades the face, ears and neck in a single fitting, closing the gap left by a standard back-only cape
- Four-point fixing system: Anchors the sunshade to the helmet from four points rather than a single strap, reducing slippage during movement or in wind
- Breathable mesh construction: Allows air through the curtain, reducing heat build-up around the head and neck during long outdoor shifts
- Reflective trim: A reflective strip along the lower edge of the mesh curtain adds visibility in low light without a separate accessory
- Hi-vis orange colouring: Improves worker visibility on site alongside the practical sun coverage
- Lightweight construction: Adds shade without adding meaningful weight to the helmet
- Wide helmet compatibility: Fits directly over the shell of most standard safety helmets without helmet-specific brackets
Who is this for
Trades and roles:
- Groundworkers
- Highways and roadworks operatives
- Utilities operatives
- Landscapers
- Rail trackside operatives
Industries:
- Construction
- Highways
- Utilities
- Rail
- Landscaping
Specifications
| Specification | Detail |
| Product Name | Hi-Vis Helmet Sunshade Neck Cape - Full Brim Design |
| SKU | HHNCBR-ORA |
| Product Type | Helmet sunshade with full brim and neck curtain |
| Coverage Area | Face, ears and neck |
| Attachment Type | Four-point fixing system |
| Brim Style | Full circular brim |
| Fabric Type | Breathable mesh |
| Reflective Trim | Yes, along lower curtain edge |
| Compatibility | Fits most standard safety helmets |
| Size | 25 x 60cm |
| Colour | Hi-vis orange |
| Pack Quantity | 200 pieces per carton |
| Carton Weight | 8.5kg net, 9.0kg gross |
Compatibility
| Application or condition | Status |
| Standard vented and non-vented safety helmets | ✓ Compatible |
| Cap-style helmets with a smooth outer shell | ✓ Compatible |
| Outdoor site work in direct sun | ✓ Compatible |
| Full brim hard hats with an integrated brim | ✗ Not recommended |
| Bump caps | ✗ Not recommended |
| Use as a stand-alone head covering without a helmet | ✗ Not recommended |
| Confined space or below-ground work | ✗ Not recommended |
Who is this for
This sunshade suits groundworkers, highways and utilities operatives, landscapers and rail trackside crews who spend extended periods working outdoors in direct sun with a safety helmet as mandatory PPE. It is aimed at site environments where a standard back-only neck cape leaves the face and ears exposed for the length of a shift, particularly on exposed highways verges, open groundwork sites and outdoor rail corridors with little natural shade.
Typical applications
- Providing shade to the face, ears and neck during long summer shifts on open groundwork sites with no natural shelter.
- Reducing glare and direct sun exposure for highways and roadworks operatives working roadside for extended periods.
- Supporting utilities crews carrying out excavation and installation work in open, unshaded locations.
- Shielding rail trackside operatives from sun exposure during lineside maintenance and inspection work.
- Assisting landscaping teams working outdoors through the day in exposed gardens, verges and public spaces.
- Reducing heat build-up around the head and neck for site operatives working in hi-vis PPE through summer months.
How to use
- Step 1: Fit the sunshade over the helmet shell with the brim opening centred over the crown.
- Step 2: Secure the four-point fixing system to the helmet, checking each point is seated firmly before starting work.
- Step 3: Adjust the mesh curtain so it hangs evenly around the neck and ears without restricting head movement.
- Step 4: Check the fit is secure before working at height, near moving machinery, or in windy conditions.
- Step 5: Remove and store flat when not in use to avoid unnecessary creasing of the mesh.
Common mistakes
- Fitting the sunshade over a helmet that already has an integrated full brim, which prevents a secure fit and reduces stability.
- Leaving one or more of the four fixing points unsecured, which allows the sunshade to shift or lift in wind.
- Assuming the mesh curtain gives the same protection as a rated hi-vis garment, when its primary function is sun and glare coverage rather than visibility compliance.
- Fitting ear defenders or a visor after the sunshade rather than before, which restricts adjustment of the curtain around them.
- Storing the sunshade folded tightly for long periods, which can crease and weaken the mesh over time.
Safety
The sunshade reduces direct sun and glare exposure to the face, ears and neck through physical shade. It is not a certified hi-vis garment and should not be relied upon in place of compliant hi-vis clothing where visibility standards apply on site. It is not suitable for use with full brim hard hats, bump caps, or as a stand-alone head covering without a safety helmet fitted underneath.
Maintenance
Wipe clean with a damp cloth and mild detergent. Air dry away from direct heat. Store flat or loosely folded to avoid creasing the mesh curtain. Inspect the four fixing points before each use and replace the sunshade if the fixing system or mesh shows signs of wear.
Frequently Asked Questions
Q: Will this sunshade fit my existing safety helmet?
A: The four-point fixing system is designed to fit most standard vented and non-vented safety helmets and cap-style helmets with a smooth outer shell. It is not designed to fit full brim hard hats that already have an integrated brim, or bump caps. Check the shape of your current helmet before ordering if you are unsure of compatibility.
Q: What level of UV protection does this sunshade offer?
A: The mesh fabric reduces direct sun exposure to the face, ears and neck by providing physical shade rather than a specific certified UPF rating. If your site requires a UPF-rated product for compliance documentation, confirm the requirement with your safety team before specifying this product. CMT Group can advise on UPF-rated alternatives where a certified rating is needed.
Q: What is this sunshade NOT suitable for?
A: This sunshade is not designed to fit over full brim hard hats or bump caps, and it is not intended for use without a safety helmet fitted underneath. It is not a substitute for certified hi-vis clothing where visibility standards apply, and it should not be treated as a rated UV protection garment without a confirmed UPF rating.
Q: How does the full brim design differ from a standard neck cape?
A: A standard neck cape only shields the back of the neck, leaving the face and ears exposed through the shift. This sunshade extends a full circular brim around the helmet, shading the face and ears alongside the neck, and uses a four-point fixing system rather than a single strap or elastic band for a more stable fit in wind and movement.
Q: Can this be worn with ear defenders or a visor?
A: Fit ear defenders or a visor to the helmet first, then adjust the mesh curtain around them. The curtain is designed to sit around additional PPE accessories rather than beneath them, so fitting order affects both comfort and coverage.
Q: How long will the sunshade last with regular site use?
A: Service life depends on how often it is worn and how it is stored between shifts. Wiping clean after use and storing flat rather than folded tightly helps the mesh curtain and fixing points last through a full season of outdoor work. Inspect the fixing points regularly and replace if wear becomes visible.
Q: Can I order these in bulk for a full site team?
A: Yes. These are supplied in cartons of 200 pieces, making them straightforward to specify for a full crew or multi-site rollout. CMT Group holds strong stock levels on core PPE accessories with no backorders, so large team orders can be fulfilled without the delays some suppliers experience during summer demand peaks.
Q: How quickly can I get these delivered to site?
A: Order by 7pm for next-day delivery nationwide on stocked lines. CMT Group runs its own fleet of vehicles covering over 95% of the UK mainland, with live order tracking and What3Words integration for delivery to a specific site entrance or compound without needing a postcode.
Q: How do I know CMT Group carries the right PPE accessories for a full site rollout?
A: CMT Group holds ISO 9001:2015 and CHAS Elite accreditation alongside Crown Commercial Service Supplier status, giving procurement teams confidence in consistent quality and supply. Reviews.io reflects over 400 verified reviews from UK trade buyers, and CMT Group has supplied UK construction and civils projects since 2010.
