IP66 waterproof LED work torches are built for site operatives and trade professionals working in wet, dusty, or harsh outdoor conditions.
- IP66 rated, waterproof and dust-tight ABS body
- Shock-resistant construction
- CREE LED full beam, 50m range
- Pocket and belt clip included
- UKCA marked
- Battery sold separately, 1 x AA required
Draper LED Waterproof Work Torch
IP66 waterproof LED work torches are built for site operatives and trade professionals working in wet, dusty, or harsh outdoor conditions.
- IP66 rated, waterproof and dust-tight ABS body
- Shock-resistant construction
- CREE LED full beam, 50m range
- Pocket and belt clip included
- UKCA marked
- Battery sold separately, 1 x AA required
- Buy 5 for £22.02 £18.35 each and save 9%
- Buy 10 for £19.96 £16.63 each and save 17%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £18.35 £22.02 | £16.63 £19.96 |
Order 1x to earn 20 FASTPoints
Order to earn 20 FASTPoints
Log in to access trade discountsLED Waterproof Work Torch
Waterproof LED work torches rated IP66 survive the conditions that finish a standard torch. Rain, site dust, and drops are all within the rating. The ABS plastic case is tested against powerful water jets and fully sealed against dust ingress. One AA battery powers a 50m white beam.
How IP66 protection changes what a work torch can do
A standard torch has no water ingress protection. One downpour or a drop in standing water ends it. IP66 closes that gap. The case is tested to resist powerful water jets from any direction and is fully sealed against dust, to IEC 60529. You get a torch that holds up when conditions are at their worst.
Key Features
-
IP66 ABS case: Waterproof and dust-tight. Tested against high-pressure water jets from all angles.
-
Shock-resistant body: ABS plastic handles drops without cracking. Rated for job site conditions.
-
CREE LED: Focused white beam. Single full-beam mode with no mode cycling.
-
50m beam range: Covers site navigation, plant area access, and inspection in low-light conditions.
-
Pocket and belt clip: Keeps the torch with the operative at all times. No loose carry.
-
UKCA marked: Declaration of Conformity available. Meets UK product safety requirements.
Who is this for
Trades and roles:
-
Site operatives
-
Maintenance technicians
-
Electricians
-
Groundworkers
-
Plant engineers
Industries:
-
Construction
-
Facilities management
-
Utilities
-
Civil engineering
-
Plant hire
Specifications
| Specification | Detail | |
| Product Name | Draper LED Waterproof Work Torch | |
| SKU | ET4L | |
| Brand | Draper | |
| Draper Part No. | 51751 | |
| LED Type | CREE LED | |
| Power | 1W | |
| Lumen Output | 60lm | |
| Beam Range | 50m | |
| Light Modes | Full beam (single mode) | |
| IP Rating | IP66 | |
| Body Material | ABS plastic | |
| Power Source | 1 x AA battery (sold separately) | |
| Batteries Included | No | |
| Accessories | Pocket/belt clip | |
| Compliance | UKCA marked | |
| Warranty | 12 months | |
| Colour | Black | |
Compatibility
| Application or condition | Status | |
| Outdoor use in rain and wet conditions | ✓ Suitable (IP66) | |
| Dusty environments | ✓ Suitable (IP66, fully dust-tight) | |
| Shock and drop resistance | ✓ Suitable | |
| Site navigation and inspection | ✓ Suitable | |
| Van and vehicle kit | ✓ Suitable | |
| Submersion (any depth) | ✗ Not suitable. IP66 is not a submersion rating. IP67 or IP68 required. | |
| Explosive or flammable atmospheres | ✗ Not suitable. No ATEX certification. | |
| High-output area floodlighting | ✗ Not suitable | |
Who is this for
This torch suits professionals who work outdoors in all weather and in harsh environments such as dusty plant rooms and wet service areas. It is a practical choice for civil engineering and groundwork sites where conditions change quickly. It also works well in vehicle kits and site stores where long-term reliability matters more than high lumen output.
Typical applications
-
Checking drainage levels, formation surfaces, and trench conditions in wet weather during groundwork and civils.
-
Inspecting electrical connections and cable routes in damp or dusty service rooms and external plant areas.
-
Navigating site compounds, access roads, and perimeter areas in the dark or in poor weather.
-
Examining pipework, valves, and instrumentation in wet or dusty plant rooms during planned maintenance rounds.
-
Van and vehicle kit for operatives who need a reliable waterproof torch in all conditions.
-
Reading plans, signage, and documentation in poorly lit outdoor locations during early morning or evening shifts.
-
Backup lighting when primary site lighting fails during a shift.
How to use
Step 1: Load 1 x AA battery into the compartment. Check polarity markings inside the cap.
Step 2: Close the battery cap fully. A properly closed cap maintains the IP66 seal.
Step 3: Attach the clip to a pocket or belt before starting work.
Step 4: Press the power button to activate. Press again to switch off.
Step 5: Dry the exterior after use in wet conditions before storing.
Common mistakes
-
Assuming IP66 means submersion-proof. It covers powerful water jets, not immersion. IP67 or IP68 is required for underwater use.
-
Leaving the battery cap loose. A partially closed cap breaks the IP66 seal. Always close fully.
-
Storing without removing the battery. Corrosion from a flat or leaking battery damages the contacts. Remove for storage over one month.
-
Using in explosive or flammable atmospheres. No ATEX rating. Not cleared for hazardous area use.
Safety
No ATEX certification. Do not use in explosive or flammable atmospheres. IP66 does not cover submersion. Always close the battery cap fully before use in wet conditions. Replace the torch immediately if the casing cracks.
Maintenance
Wipe down with a dry cloth after each shift. Check the lens seal and battery cap before use in heavy rain. Remove the battery for storage over one month. Replace if the ABS casing is cracked or the lens is damaged.
Frequently Asked Questions
Q: What does IP66 mean in practice for site and trade use?
A: IP66 is defined by IEC 60529. The first 6 means fully dust-tight. Nothing gets in. The second 6 means the case withstands powerful water jets from any direction. That covers heavy rain, site washdowns, and splashing. It is not a submersion rating. For immersion or underwater use, IP67 or IP68 is required.
Q: What is this torch NOT suitable for?
A: It carries no ATEX certification. Do not use it in explosive or flammable atmospheres. IP66 does not cover submersion. There is no dimmer, strobe, or low-power mode. It is a handheld torch and does not provide hands-free operation.
Q: Does it come with a battery?
A: No. One AA battery is required and sold separately. Order a battery at the same time to have the torch ready on delivery.
Q: What is the beam output and range?
A: The CREE LED produces 60 lumens of white light with a 50m beam range. That covers site navigation, plant room inspection, and access route lighting in dark or low-light conditions.
Q: Is IP66 the same as submersion-proof?
A: No. IP66 covers powerful water jets but not submersion. IP67 covers immersion up to 1m for 30 minutes. IP68 covers deeper or longer immersion. For typical site work in rain and wet ground conditions, IP66 is the right specification.
Q: How does this compare to a standard work torch?
A: A standard torch with no IP rating fails in rain, in a puddle drop, or after a wet shift. This torch is tested to IP66 with a shock-resistant ABS case. In wet outdoor and plant room environments, the difference between a rated and unrated torch is the difference between reliable light and none.
Q: Is there a warranty?
A: A12-month warranty.
Q: How should I maintain the torch?
A: Wipe the body dry after each wet shift. Always close the battery cap fully. Remove the battery for storage over one month. Inspect the lens seal before use in heavy rain.
