MAX Smooth Nitrile Palm Coated Gloves - Construction Engineering and Assembly

MAX Smooth Nitrile Palm Coated Gloves

The MAX Smooth Nitrile Palm Coated Gloves are designed for construction operatives, mechanical engineers, and assembly workers who need consistent dry grip, high dexterity, and all-day comfort from a lightweight palm-coated glove. The smooth nitrile coating provides a non-porous surface that performs reliably in dry and dusty environments where foam nitrile alternatives can trap debris in their micro-porous structure. The 13-gauge seamless polyester liner sits close to the hand without bulk, giving operatives the tactile sensitivity needed for tool handling, component assembly, and precision construction tasks.

Why Choose the MAX Smooth Nitrile Palm Coated Gloves

• Smooth nitrile for dry and dusty environments: The non-porous smooth nitrile surface maintains consistent grip on tools, components, and construction materials in dry conditions. Unlike foam nitrile, the smooth surface does not trap fine dust or debris in its coating, making it the correct choice for dusty construction, engineering, and assembly environments.

• 13-gauge seamless polyester liner: The finer gauge sits closer to the hand than heavier grip gloves, preserving finger sensitivity for precise component handling and tool use. The seamless construction removes the internal pressure points that cause fatigue during long assembly and engineering shifts.

• Puncture resistance level 2: Rated at 60N puncture resistance under EN388:2016+A1:2018. This is a stronger puncture rating than the level 1 (20N) carried by many foam nitrile palm-coated alternatives, providing better protection against sharp points and protruding fasteners during construction and engineering tasks.

• Latex free throughout: The smooth nitrile coating and polyester liner contain no natural latex. These gloves are safe for operatives with confirmed or suspected latex sensitivity without any compromise on grip or dexterity.

• Breathable open-knit back: The uncoated back of hand allows heat and moisture to escape throughout a shift. For operatives wearing gloves continuously across a full working day in engineering and assembly environments, breathability reduces the discomfort that leads to gloves being removed.

• Knitted elasticated cuffs: The cuff seats firmly at the wrist without restriction, keeping debris and dust from entering the glove during construction and handling tasks.

• Plastic-free, zero-waste packaging: Part of the CMT ThinkGreen range, supporting sites with ESG and Scope 3 reporting requirements.

What's Included

• 12 pairs of MAX Smooth Nitrile Palm Coated Gloves in your chosen size (M, L, XL, or XXL), supplied in plastic-free packaging.

 Specifications

Compatibility

Who Is This For?

The MAX Smooth Nitrile Palm Coated Gloves are designed for construction operatives, mechanical engineers, assembly workers, and site trades who need dry grip, dexterity, and all-day wearing comfort from a lightweight palm-coated glove. They are the right choice for operatives working in dry, dusty, or clean environments where smooth nitrile outperforms foam nitrile, and for sites standardising on a single latex-free nitrile grip glove across mixed trades.

Typical Applications

• Mechanical engineering and assembly requiring finger sensitivity and controlled tool handling

• Dry construction site handling of components, fixings, and building materials

• Electrical installation and cable management in dry environments

• Warehouse and logistics picking, packing, and sorting in dry conditions

• Automotive servicing and light engineering in clean dry environments

• Site maintenance and facilities management tasks requiring a lightweight grip glove

• Small parts handling and quality inspection requiring tactile sensitivity

How to Use

1. Select the correct size: M (8), L (9), XL (10), or XXL (11). A close fit maximises dexterity and prevents the palm coating from bunching during precision tasks.

2. Pull the glove fully over the hand and seat the elasticated cuff at the wrist.

3. Check the palm coating lies flat against the hand with no folds before starting work.

4. Inspect the smooth nitrile coating before each use. Replace when cracking, peeling, or thinning is visible at the fingertips or palm centre.

5. Do not use for tasks requiring sustained wet grip, waterproofing, cut resistance above level 1, or chemical handling.

Safety

Certified to EN388:2016+A1:2018 (3122X) for mechanical risk protection. Abrasion level 3 and puncture level 2 provide solid mechanical protection for construction and engineering handling tasks. Not suitable for sharp blade tasks, chemical immersion, heat, or flame. The smooth nitrile palm performs in light damp conditions but is not designed for sustained wet grip tasks. Contains no natural latex and is safe for operatives with latex sensitivity.

Maintenance

Wipe clean with a damp cloth after use if contaminated. Do not machine wash as laundering may affect the nitrile coating's performance. Air dry away from direct heat and sunlight. Inspect the palm coating before each shift and replace when wear is visible at the fingertips or palm.

Frequently Asked Questions

Q: What is the difference between smooth nitrile and foam nitrile palm coated gloves?

 A: Smooth nitrile applies a flat, non-porous coating to the palm. It provides consistent dry grip and does not trap dust or debris in the coating surface, making it the correct choice for dry, dusty, and clean environments. Foam nitrile uses a micro-porous structure that channels moisture away from the grip surface, making it better in damp and wet handling conditions. For dry construction and engineering work, smooth nitrile is the right coating. For wet or damp handling, foam nitrile is preferable.

Q: What does the EN388:2016+A1:2018 3122X rating mean?

A: EN388 is the UK and European standard for mechanical risk glove protection. The 3122X rating breaks down as: abrasion level 3 (2000 cycles), blade cut level 1, tear level 2, puncture level 2 (60N), TDM cut not tested. The puncture resistance level 2 is notably stronger than the level 1 (20N) carried by many foam nitrile palm-coated alternatives in this category.

Q: Are these gloves latex free? A: Yes. The smooth nitrile coating and polyester liner contain no natural latex. These gloves are safe for operatives with confirmed or suspected latex sensitivity.

Q: How do these compare to the MAX Foam Nitrile Palm Coated Gloves?

 A: Both are 13-gauge palm-coated nitrile gloves but they serve different conditions. The smooth nitrile version (SNG) is better for dry, dusty, and clean environments where a flat non-porous surface maintains consistent grip. The foam nitrile version (SFNGPC) is better in damp and lightly wet conditions where its micro-porous structure provides superior wet traction. The SNG also carries a stronger puncture resistance rating (level 2 vs level 1).

Q: Are these suitable for precision assembly and engineering work?

 A: Yes. The 13-gauge seamless polyester liner provides a close, seam-free fit that preserves finger sensitivity for controlled component handling, tool use, and assembly tasks throughout a shift.

Q: Can these be machine washed?

 A: No. Wipe clean with a damp cloth only. Machine washing can alter the performance of the nitrile coating and may affect the EN388 rating.

Q: Are these part of the CMT ThinkGreen range?

 A: Yes. Supplied in plastic-free, zero-waste packaging as part of CMT ThinkGreen, supporting sites with ESG and Scope 3 reporting requirements.

Q: How do I order and what are the delivery options?

 A: Order at cmt.co.uk. Next working day delivery for online orders placed by 7pm. VIP dedicated delivery available UK-wide, dispatched within 30 minutes. Trade accounts and bulk pricing are managed through the EDGE procurement portal with agreed pricing, role-based spending controls, and live delivery tracking.