MAXTEC Bi-Metal Reciprocating Saw Blade 150mm 14 TPI - Metal and Wood with Nails Cutting

MAXTEC Bi-Metal Reciprocating Saw Blade 150mm 14 TPI - Metal and Wood with Nails Cutting

The MAXTEC Bi-Metal Reciprocating Saw Blade 150mm 14 TPI is a compact mixed-material cutting blade designed for fast cutting through timber, light metal, and nail-embedded wood in tight access conditions. At 150mm overall length with a 128mm working length, it is the shortest blade in the MAXTEC range and the correct choice when a longer blade would foul against the surrounding structure in ceiling voids, joist bays, stud walls, and confined plant room conditions. The 14 TPI tooth pattern cuts aggressively through timber whilst the bi-metal construction handles incidental contact with embedded nails, screws, and metal fixings without the blade fracturing or the teeth stripping. For tradespeople who cut through old timber containing unknown fixings during refurbishment, adaptation, and strip-out work, this is the blade that survives the contact.

Why Choose the MAXTEC Bi-Metal Reciprocating Saw Blade 150mm 14 TPI

• Bi-metal construction for nail and screw contact: flexible alloy steel body resists breakage on impact with embedded fixings whilst hardened HSS teeth recover cutting aggression after metal contact.

• 14 TPI for mixed-material cutting: aggressive enough for fast timber cutting, fine enough for controlled cuts through light metal sections in the same stroke.

• 150mm compact length: the shortest MAXTEC recip blade, designed specifically for tight access cutting where longer blades cannot operate safely.

• 128mm working length: covers the majority of timber joist, studwork, and light metal cutting depths encountered on refurbishment and installation work.

• Suitable for nail-embedded timber: engineered to cut through old floorboards, structural timber, and studwork containing nails and screws without blade failure.

• Pack of five: trade quantity for professional consumption rates on busy refurbishment and installation sites.

What's Included

• 5 x MAXTEC Bi-Metal Reciprocating Saw Blade, 150mm, 14 TPI

 Specifications

Compatibility

Who Is This For?

The MAXTEC Bi-Metal Reciprocating Saw Blade 150mm 14 TPI is aimed at electricians, plumbers, joiners, and general construction trades who cut through timber and light metal in tight access conditions during installation, refurbishment, and adaptation work. It suits the electrician cutting through nail-embedded studwork to chase cable routes, the plumber cutting through old timber joists containing embedded fixings, and the joiner cutting timber in confined roof and floor void conditions where a longer blade is impractical.

Typical Applications

• Cutting through nail-embedded timber joists and studwork during refurbishment and adaptation work

• Cutting timber in tight ceiling voids, floor voids, and roof spaces where blade length is restricted

• Cutting through old floorboards and structural timber containing unknown nails and screws

• Cutting light metal conduit and trunking in confined access conditions

• Cutting plastic pipe and trunking in restricted joist bays and service voids

• Mixed material cutting through plasterboard, timber, and metal fixings during strip-out work

• Cutting timber framing and studwork during partition installation and adaptation

How to Use

1. Fit the blade into the reciprocating saw blade clamp using the universal shank and confirm it is fully locked before operating.

2. Allow the saw to reach full speed before contacting the workpiece.

3. Apply steady forward pressure through timber and allow the blade to manage nail and screw contact without forcing.

4. Reduce stroke rate slightly when cutting light metal sections to extend blade life.

5. Keep the blade moving consistently to prevent binding in deep timber cuts.

6. Inspect the blade after use on nail-embedded timber as tooth wear is accelerated by metal contact.

Safety

• Eye protection to EN 166 is mandatory for all reciprocating saw operations.

• Wear cut-resistant gloves to EN 388 when handling and changing blades.

• Secure the workpiece firmly before cutting to prevent movement on breakthrough.

• Always locate concealed services before cutting through walls, floors, or ceilings.

• Be aware that nail-embedded timber will cause sudden resistance changes during cutting.

Maintenance

• Inspect blades before each use for cracked, chipped, or missing teeth.

• Replace blades promptly after heavy nail contact as tooth damage accelerates on subsequent use.

• Store blades flat in a dry environment to prevent corrosion.

• Clean timber resin and metal swarf from blades after each use before storage.

Frequently Asked Questions

Q: What materials can this blade cut?

A: The MX-922BF cuts softwood, hardwood, plywood, nail-embedded timber, light metal sections, steel conduit, and plastic pipe and trunking. It is not suitable for thick structural steel or masonry.

Q: Why is 14 TPI better than 18 TPI for timber and mixed material cutting?

 A: 14 TPI removes material more aggressively per stroke than 18 TPI, which makes it faster through timber and mixed material. 18 TPI is better suited to clean metal-only cutting where finish quality matters more than speed.

Q: Will the blade survive hitting nails and screws in old timber?

 A: Yes. The bi-metal construction is specifically engineered for this. The flexible body absorbs the impact without fracturing and the hardened HSS teeth resist stripping on nail contact. Expect increased tooth wear after heavy nail contact and inspect the blade before reuse.

Q: Why choose 150mm over a longer blade?

 A: The 150mm length is the correct choice when access conditions prevent a longer blade from operating safely. In tight ceiling voids, joist bays, and confined plant rooms, a 228mm or 300mm blade will foul against the surrounding structure. The 150mm blade gives the operator full stroke travel in conditions where longer blades cannot function.

Q: Will this blade fit my reciprocating saw?

 A: Yes. The MX-922BF uses a universal shank compatible with all major reciprocating saw brands including Bosch, DeWalt, Milwaukee, Makita, Metabo, and Fein.

Q: Why should I order from CMT Group?

 A: CMT Group has supplied UK construction sites since 2010 with next working day delivery, a FORS Silver accredited fleet covering 90% of the UK mainland, and the EDGE portal for agreed contract pricing and live delivery tracking.