Road and Pothole Repair Asphalt - 25kg

Cold Asphalt Road Repair – 25kg

A ready-to-use cold lay asphalt repair material designed for fast and effective patching of potholes, surface damage and worn areas on asphalt and macadam surfaces. Supplied in a 25 kg weather-resistant bag, this cold asphalt can be applied directly from the pack without heating or specialist equipment, making it ideal for both planned maintenance and emergency repairs. Once compacted, it forms a strong, stable repair suitable for restoring damaged road and surface areas quickly and effectively.

Features & Benefits

• Ready to use cold lay asphalt
  Can be applied straight from the bag without heating, mixing or specialist tools, saving time on site.

• Quick and simple application
  Just clean the area, place the material and compact to achieve an immediate repair.

• Suitable for year-round use
  Designed to be workable in a wide range of weather conditions, allowing repairs to be completed when hot lay materials are impractical.

• Durable repair finish
  Forms a solid, stable surface once compacted, helping extend the service life of the repaired area.

• 6 mm graded aggregate mix
  Provides a consistent texture that is easy to level and compact for a neat, even finish.

• Convenient 25 kg bag size
  Easy to handle, transport and store, making it ideal for small to medium repair works.

Applications

Suitable for a wide range of temporary and maintenance road repair tasks, including:

• Pothole repairs on roads, driveways and access routes

• Surface reinstatement on footpaths and paved areas

• Repairs in car parks and service yards

• Filling surface defects and worn sections of asphalt

• Temporary reinstatement following utility and service works

Packaging & Pallet Information

• Pack size: 25 kg per bag

• Packaging: Durable, weather-resistant plastic bag

• Pallet quantity: Typically 56 bags per pallet

• Storage: Can be stored outdoors in original packaging; protect from extreme temperatures

• Shelf life: Up to 12 months when stored correctly

Please contact our sales team on 020 8311 1144 for more information and bulk enquries 

• Use a rake or spade to spread the Drive Repair Asphalt to the required thickness, remembering to be slightly proud of the hole to allow for compaction
• Use a flat heavy object for ‘tamping’ such as a tamper or mechanical plate compactor
• Wet the tamper frequently to stop the Drive Repair Asphalt sticking to the tool and ‘picking up’

• NOTE: When repairing deep potholes (greater than 30mm) lay the Drive Repair Asphalt in two stages. Ensuring the first layer is fully compacted before spreading the next layer and
  compacting to the required finished surface level

In warm weather it can be beneficial to lightly dust a little dry sand over the surface after compaction to help reduce ‘picking up’ of the fresh material as it sets.

The coverage rate of this Drive Repair Asphalt is approximately 0.4m2 per bag, when compacted to a depth of 30mm.

• Not suitable for heavily trafficked areas, or areas exposed to high stress such as turning
• Protect the newly laid surface from caravan legs, motorbike kickstands and other similar high-loadings
• Do not place heavy and sharp objects on the newly laid surface
• Protect the newly laid surface from vehicle tyres and power steering action
• Timber sheets can spread loading of vehicle tyres but will also reduce oxidation which is required for the product to harden. Therefore do not leave permanently covered as this will  extend the time taken to fully harden
• Drive Repair Asphalt should be placed within the temperature range of 5°C to 30°C
• The workability of the Drive Repair Asphalt will improve if the outside temperature is above 10°C
• The material may be prone to marking and deformation during early life and warm conditions
• The time taken to fully harden will depend on the degree of compaction and ambient conditions
• Surface finish can be improved by further tamping
• After prolonged storage or in cold conditions, it may be necessary to expose the bag of the Drive
• Repair Asphalt to direct sunlight for 1-2 hours prior to opening to loosen the material and restore workability