Securasite Round Top Temporary Site Fence Panel - Galvanised Steel 2025 x 3450mm

Who is this for

Securasite round top temporary site fence panels are used primarily by principal contractors, site managers, demolition contractors, and event managers who need a fast-deploy, reusable anti-climb perimeter system for construction sites, demolition exclusion zones, public realm works, and temporary event boundaries. The 2025 x 3450mm panel dimensions are the standard UK temporary fencing specification, compatible with all rubber block feet, steel couplers, and panel stillages available in the UK market. Principal contractors specifying site perimeter fencing under CDM 2015 public protection obligations will find the 40mm horizontal pitch anti-climb mesh meets the anti-climb requirement for construction sites adjacent to public areas. Event managers and local authorities specifying powder coated panels for branded or colour-coded site enclosures can order any RAL colour on request. For procurement teams managing large construction programmes across multiple sites, the panel's 15kg robust construction and galvanised finish support repeated redeployment without structural degradation under normal site handling conditions.

Typical applications

Constructing temporary site perimeters on construction and civil engineering sites to meet CDM 2015 public protection obligations, preventing unauthorised access and protecting the public from falling objects, site traffic, and plant machinery operating within the perimeter.

Establishing demolition exclusion zones where the 40mm horizontal pitch anti-climb mesh prevents operatives and members of the public from scaling the perimeter fence into areas where structural collapse risk, falling debris, or hazardous material exposure are present.

Creating temporary event boundaries and crowd management barriers at outdoor events, festivals, public exhibitions, and sporting events where reusable galvanised panels provide a cost-effective alternative to single-use hoarding.

Defining utilities and infrastructure works boundaries in residential streets and public areas where a temporary perimeter is required to protect the public from open excavations, exposed services, and plant operations.

Erecting branded site enclosures on high-profile development sites where powder coated panels in the developer's or contractor's corporate colour create a consistent branded appearance across the site boundary for the duration of the project.

Providing temporary security perimeters around plant compounds, materials storage areas, and welfare units within a larger construction site where internal zone separation and theft prevention are required alongside the main site perimeter.

How to use

Step 1: Before erecting panels, confirm the number of panels, feet, and couplers required for the full perimeter run. Each panel covers 3.45 linear metres. Divide the total perimeter length by 3.45 to calculate the panel quantity and add a contingency allowance for gates and corners.

Step 2: Position rubber block feet at regular intervals along the perimeter line. Standard practice is one foot per panel connection point. Feet must be adequately ballasted with water or sand fill for wind resistance before panels are attached, particularly on exposed sites.

Step 3: Lift each panel into the foot sockets. Two operatives are required for panel handling at 15kg per panel. Do not attempt single-operative installation on panels of this weight.

Step 4: Connect adjacent panels at the top and bottom using steel couplers. Fix couplers at both the top and bottom connection points on each join for maximum panel stability and wind resistance.

Step 5: Inspect the full perimeter run after installation. Check all coupler connections are secure, all feet are properly ballasted, and no panel is leaning or showing signs of movement. On exposed or traffic-adjacent sites, inspect daily.

Step 6: Where debris netting, privacy screen, or branding is to be attached to the panels, inform the site manager so the additional wind load on the feet and couplers can be assessed before attachment.

Step 7: On removal, disconnect couplers and lift panels out of feet systematically. Stack panels flat or upright in a stillage for transport and storage. Inspect each panel before stacking and set aside any panels with frame distortion or mesh damage for assessment before redeployment.

Common mistakes

Installing without adequate foot ballasting: Rubber block feet without ballast provide minimal wind resistance. An unballasted temporary fence panel can topple in moderate wind, creating a public safety hazard and a CDM compliance failure. Always fill feet with water or sand ballast before completing the perimeter run.

Using a single coupler per panel join: Connecting panels with a single coupler at the top only allows the lower section of adjacent panels to separate under lateral pressure from wind or crowd loading. Always fix couplers at both the top and bottom of every panel join.

Attaching debris netting or branding without assessing wind load: Solid or semi-solid attachments to temporary fence panels significantly increase the wind load the feet must resist. The HSE advises that the site manager must assess the additional wind load before any netting or screening is attached to a temporary fence system.

Stacking panels without inspection between deployments: A panel with a distorted frame or damaged mesh weld joints may appear serviceable until it is erected and the structural weakness becomes apparent under wind or impact loading. Inspect every panel before redeployment.

Ordering panels without feet and couplers: Feet and couplers are not included with these panels and must be ordered separately. A common procurement error is ordering panels for a project start date without ensuring feet and couplers are on site at the same time.

Safety

Temporary site fence panels must be installed in compliance with the Construction (Design and Management) Regulations 2015, which place a duty on principal contractors to manage and maintain site perimeters to protect the public from site hazards. Panels must be adequately ballasted and connected at all times during the installation period. Inspect the full perimeter after any high wind event and following any incident of deliberate interference or vehicle impact. Damaged panels must be removed from service immediately and not reinstalled until assessed as structurally sound. Do not use temporary fencing panels as a substitute for permanent security fencing under BS 1722. This product is a temporary site fencing solution only.

Maintenance

Inspect panels before each deployment for frame distortion, mesh weld failures, and corrosion damage to the galvanised coating. Minor surface corrosion on galvanised panels is normal after extended outdoor deployment and does not necessarily indicate structural failure. Deep pitting corrosion or frame distortion indicates the panel should be removed from service. Clean panels with water and a stiff brush before storage to remove concrete, mortar, and construction debris that can accelerate corrosion at weld points. Store panels flat or upright in a dry location or a panel stillage. Powder coated panels should be inspected for coating damage before redeployment: touch up any areas of exposed steel with a compatible primer to prevent corrosion at the repair point.