Smooth nitrile palm coated grip gloves built for construction operatives, engineers, and general handling workers who need dry grip, high dexterity, and a confirmed latex-free hand protection option.
- Latex free throughout: smooth nitrile coating and polyester liner contain no natural latex
- EN388:2016+A1:2018 certified, CE and UKCA marked, rated 3121X
- Smooth nitrile palm coating for consistent dry grip on tools, components, and construction materials
- 13-gauge seamless polyester liner for close fit, dexterity, and all-day comfort
- Breathable uncoated back of hand and fingers to reduce heat and moisture build-up
- Elasticated knitted cuff for secure wrist fit
- Available in multiple sizes 9(L) - 10(XL)
- Supplied in packs of 12, plastic-free packaging
MAX Smooth Nitrile Palm Coated Grip Gloves - Latex Free Dry Grip
Smooth nitrile palm coated grip gloves built for construction operatives, engineers, and general handling workers who need dry grip, high dexterity, and a confirmed latex-free hand protection option.
- Latex free throughout: smooth nitrile coating and polyester liner contain no natural latex
- EN388:2016+A1:2018 certified, CE and UKCA marked, rated 3121X
- Smooth nitrile palm coating for consistent dry grip on tools, components, and construction materials
- 13-gauge seamless polyester liner for close fit, dexterity, and all-day comfort
- Breathable uncoated back of hand and fingers to reduce heat and moisture build-up
- Elasticated knitted cuff for secure wrist fit
- Available in multiple sizes 9(L) - 10(XL)
- Supplied in packs of 12, plastic-free packaging
MAX Smooth Nitrile Palm Coated Grip Gloves - Latex Free Dry Grip
Smooth nitrile palm coated grip gloves designed for construction operatives, mechanical engineers, and general handling workers who need consistent dry grip, high dexterity, and a confirmed latex-free hand protection option for everyday site, workshop, and handling tasks. The 13-gauge seamless polyester liner sits close to the hand without bulk, giving operatives the tactile sensitivity needed for tool handling, component placement, and precision site tasks throughout a full shift. The uncoated breathable back allows heat and moisture to escape during continuous wear, reducing the discomfort that causes operatives to remove gloves between tasks. Certified to EN388:2016+A1:2018 rated 3121X, CE and UKCA marked, with UKCA type examination by SATRA Approved Body 0321. Supplied in plastic-free packaging as part of CMT Group's commitment to reducing single-use plastic across its product range.
How smooth nitrile palm coating delivers dry grip where latex alternatives fall short
Construction sites, engineering workshops, and general handling environments expose gloves to constant abrasion from rough materials, tools, and components. A latex-coated glove introduces allergy risk across any workforce where sensitisation status is unknown, and on dry, dusty surfaces the latex surface can lose traction as dust accumulates in the coating. Smooth nitrile applies a non-porous, abrasion-resistant surface that performs consistently on dry construction materials, tools, and components without latex contact risk, and maintains its grip performance across the shift as the coating resists dust ingress. For procurement teams standardising on a single latex-free grip glove across mixed construction and engineering trades, smooth nitrile at this specification provides the compliance certainty and performance consistency a latex alternative cannot guarantee.
Key Features
Latex free throughout: The smooth nitrile coating and 13-gauge polyester liner contain no natural latex. Safe for operatives with confirmed or suspected latex sensitivity without any compromise on grip performance or dexterity. Removes allergy risk from the specification decision for procurement teams managing large or mixed workforces.
Smooth nitrile palm coating: Non-porous abrasion-resistant surface delivers consistent dry grip on tools, components, fixings, and construction materials. Resists dust ingress that can cause traction loss on dry site surfaces, maintaining reliable grip performance from the start of the shift to the end.
13-gauge seamless polyester liner: Fine gauge construction sits close to the hand with no internal seam pressure, preserving tactile sensitivity for tool handling, component placement, and precision assembly tasks. The seamless construction removes the pressure points that cause discomfort and reduce dexterity compliance during extended continuous wear.
Breathable uncoated back: The knitted back of hand and fingers is left uncoated, allowing warm air and moisture vapour to escape during sustained wear. Reduces the heat build-up that causes operatives to remove gloves mid-task, maintaining hand protection compliance across the full working shift.
Elasticated knitted cuff: Seats firmly at the wrist without restricting movement, keeping debris, dust, and small particles from entering the glove during construction, handling, and workshop tasks.
EN388:2016+A1:2018 certified, CE and UKCA marked: UKCA type examination by SATRA Approved Body 0321 confirms conformity with UK PPE Regulations 2016/425 as a Category II product. Declaration of Conformity issued by CMT Equipment Ltd T/A CMT Group as manufacturer.
CMT MAX brand: Manufactured and certified by CMT Group. Full traceability, UK Declaration of Conformity, and direct manufacturer accountability on every pair.
Who is this for
Trades and roles:
-
Construction operatives and labourers
-
Mechanical engineers
-
Assembly workers
-
General handling operatives
-
Site managers and maintenance staff
-
Warehouse and logistics workers
Industries:
-
Construction
-
Mechanical engineering and manufacturing
-
Facilities management
-
Warehousing and logistics
-
General industry and utilities
Specifications
| Specification | Detail |
|---|---|
| Product Name | MAX Smooth Nitrile Palm Coated Grip Gloves - Latex Free Dry Grip |
| SKU / Product Code | MXN |
| Glove Category | Smooth nitrile palm coated general handling grip glove |
| Latex Free | Yes — smooth nitrile coating and polyester liner contain no natural latex |
| EN Standard | EN388:2016+A1:2018 |
| EN388 Rating | 3121X |
| Abrasion Resistance | Level 3 (2000 cycles) |
| Blade Cut Resistance | Level 1 (Coupe test) |
| Tear Resistance | Level 2 (25N) |
| Puncture Resistance | Level 1 (20N) |
| TDM Cut Resistance (ISO 13997) | X — test not conducted |
| Impact Protection | Not tested |
| Certification Marks | CE and UKCA, Category II |
| UKCA Type Examination | SATRA Approved Body 0321, certificate AB0321/21218-01/E00-00 |
| Coating Type | Smooth nitrile |
| Coating Coverage | Palm coated — palm and front of fingers |
| Liner Material | 13-gauge seamless polyester |
| Back of Hand | Uncoated breathable knitted polyester |
| Cuff Type | Elasticated knitted cuff |
| Grip Environment | Dry and dust-free conditions |
| Pack Quantity | 12 pairs |
| Colour | Red liner, black nitrile coating |
| Packaging | Plastic-free, zero-waste |
Compatibility
| Application / Condition | Status |
|---|---|
| Dry construction material handling | ✓ Compatible |
| Tool handling and site equipment use | ✓ Compatible |
| Mechanical engineering and assembly | ✓ Compatible |
| General handling in dry environments | ✓ Compatible |
| Warehousing and logistics dry handling | ✓ Compatible |
| Operatives with latex sensitivity | ✓ Compatible — latex free |
| Sustained wet or waterproof handling | ✗ Not recommended |
| Oily or heavily contaminated surfaces | ✗ Not recommended |
| Sharp blade or cut-hazard tasks | ✗ Not recommended |
| Chemical immersion or splash | ✗ Not recommended |
| Heat or flame exposure | ✗ Not recommended |
| Needle-stick or puncture-hazard tasks | ✗ Not recommended |
Who is this for
Smooth nitrile palm coated grip gloves at this specification are used primarily by construction operatives, mechanical engineers, and general handling workers who carry out everyday material handling, tool use, and site tasks in dry environments throughout a full shift. The latex-free construction makes these gloves the correct specification for procurement teams managing large or mixed workforces where operative allergy status cannot be individually verified, removing the allergy risk from the specification decision without compromising grip or dexterity. Site managers, safety officers, and procurement teams sourcing a single general-purpose grip glove to standardise across multiple trades and engineering roles will find these gloves meet EN388:2016+A1:2018 requirements for general mechanical risk under the Personal Protective Equipment at Work Regulations 1992, with UKCA marking confirmed by SATRA type examination.
Typical applications
Handling construction materials including bricks, blocks, timber, fixings, and site consumables in dry site conditions where consistent grip and dexterity are both required throughout the shift.
Tool handling and site equipment operation on construction and civil engineering sites where close-fitting 13-gauge construction allows precise tool control alongside basic mechanical hand protection.
Mechanical and engineering assembly tasks in workshop environments where dry grip, tactile sensitivity, and latex-free certification are all required simultaneously for compliance across a mixed workforce.
Warehouse and logistics picking, packing, and general goods handling in dry environments where breathable all-day comfort reduces hand fatigue and maintains glove compliance across extended shifts.
Facilities management maintenance tasks involving general material and equipment handling where a lightweight, breathable grip glove is required for everyday dry-environment tasks.
Electrical installation and cable routing in dry environments where tactile sensitivity and latex-free certification are both required by the site's hand protection specification.
Light assembly and component handling tasks in manufacturing and production environments where smooth nitrile outperforms foam nitrile on clean, dry, non-porous component surfaces.
How to use
Step 1: Select the correct size. At 13 gauge, correct sizing is essential for preserving the close fit that maintains tactile sensitivity and grip performance.
Step 2: Inspect the smooth nitrile coating before each use. Check the palm and fingertip area for thinning, cracking, or visible wear. Do not use a glove with visible coating damage, mechanical protection is compromised once the nitrile surface is breached.
Step 3: Pull the glove fully over the hand, ensuring all fingers are completely seated with the nitrile coating covering the full palm and front of fingers. Check that no liner bunching is visible at the fingertips.
Step 4: Seat the elasticated knitted cuff flat against the wrist before beginning work. The cuff should sit without folds or pressure points.
Step 5: After use, wipe with a damp cloth to remove dust and light debris. Do not launder or dry-clean, performance levels are rated for new condition only and cannot be guaranteed after washing.
Step 6: Air dry fully before storing. Store away from direct sunlight, heat sources, and ozone.
Step 7: Replace when the nitrile coating shows visible thinning or cracking at the palm and fingertips, or when grip performance drops noticeably on dry surfaces.
Common mistakes
Using in wet or oily conditions: This is a smooth nitrile palm-coated glove performing in dry environments. In sustained wet conditions the uncoated knitted back absorbs moisture, and smooth nitrile loses traction on oily or greasy surfaces. For wet handling use a fully coated waterproof glove. For oily or contaminated surfaces use a foam nitrile or sandy nitrile alternative.
Selecting the wrong size: At 13 gauge, an oversized glove creates fingertip bunching that reduces tactile feedback and grip precision. Undersizing stresses the coating at the knuckles and shortens service life. Size accurately.
Continuing to use a worn glove: The nitrile coating thins at the fingertips and palm through daily abrasion contact. A worn coating reduces grip performance and mechanical protection simultaneously. Inspect before every shift and replace when visible thinning or cracking is present.
Washing or dry cleaning the gloves: The user instructions confirm performance levels are rated for products in new condition only and cannot be guaranteed after laundering. Wipe with a damp cloth and air dry only.
Specifying for cut or puncture-hazard tasks: The EN388 rating of 3121X confirms low cut and puncture resistance. These are general handling gloves. They must not be used for tasks involving sharp blades, rebar, sheet metal, or significant cut hazard.
Safety
These gloves are certified to EN388:2016+A1:2018 (3121X), CE and UKCA marked Category II, with UKCA type examination by SATRA Approved Body 0321. They provide general mechanical protection for dry construction and handling tasks and must not be used for cut or puncture-hazard tasks, sustained wet handling, chemical immersion, heat, or flame exposure. Do not use near moving machinery, the user instructions flag an entanglement hazard where tear resistance is Level 1 or above, which applies to this product. The gloves contain no natural latex and are safe for operatives with confirmed or suspected latex sensitivity. A task-specific risk assessment under the Personal Protective Equipment at Work Regulations 1992 should confirm suitability before use.
Maintenance
Wipe with a damp cloth after use to remove dust and light debris. Do not wash or dry clean, performance is rated for new condition only and cannot be guaranteed after laundering. Air dry fully at room temperature before storing. Store in dry conditions away from direct sunlight, heat sources, and ozone. Inspect the nitrile coating at the palm and fingertips before every use. Replace when the coating shows thinning, cracking, or visible wear, or when grip performance drops on dry surfaces.
Frequently Asked Questions
Q: What is smooth nitrile and why does it perform better than foam nitrile in dry conditions?
A: Smooth nitrile is a non-porous nitrile coating applied in a flat, dense layer across the palm and front of fingers. Foam nitrile uses a micro-textured surface with tiny air pockets that improve grip in damp conditions by increasing surface friction on wet materials. In dry, clean, and dusty environments, the non-porous smooth nitrile surface maintains consistent contact with components, tools, and construction materials without the micro-pores trapping dry dust and reducing traction. For assembly tasks, precision handling, and dry construction site work, smooth nitrile delivers more consistent grip than foam nitrile in those specific conditions.
Q: What does the EN388:2016+A1:2018 rating of 3121X mean for a general handling grip glove?
A: EN388 is the UK standard for gloves protecting against mechanical risks. Each digit in the code represents a separate test result. The first digit (3) is abrasion resistance at Level 3, meaning the coating withstood 2000 rub cycles before failure, which is a strong result for a lightweight palm-coated glove at this gauge. The second digit (1) is blade cut resistance at Level 1 using the older Coupe rotating blade test, confirming low cut protection appropriate for general handling rather than cut-hazard tasks. The third digit (2) is tear resistance at Level 2, requiring 25 Newtons of force to tear the material. The fourth digit (1) is puncture resistance at Level 1, rated at 20 Newtons. The fifth position (X) means the TDM straight-blade cut test under ISO 13997 was not conducted: X does not indicate a failed test, it means the test was not performed for this product type. CE and UKCA marking confirmed by SATRA Approved Body 0321 type examination under UK PPE Regulations 2016/425.
Q: What are these gloves NOT suitable for?
A: These gloves provide general mechanical protection for dry construction and handling tasks only. They must not be used for tasks involving sharp blades, rebar, sheet metal, or any application where cut protection is required, as the EN388 rating confirms low cut and puncture resistance. They are palm-coated only and not suitable for sustained wet handling, waterproof applications, or wet concrete work. They carry no EN374 chemical protection rating and must not be used for chemical handling or splash exposure. They are not rated for heat, flame, or electrical arc hazard. Do not use near moving machinery due to the entanglement hazard noted in the user instructions.
Q: Are these gloves safe for operatives with a latex allergy?
A: Yes. The smooth nitrile coating and 13-gauge polyester liner contain no natural latex. These gloves are confirmed latex free and safe for operatives with confirmed or suspected latex sensitivity, with no compromise on grip or dexterity compared with latex-coated alternatives. This makes them suitable for procurement teams standardising a single grip glove specification across large workforces where individual allergy status cannot be verified for every operative.
Q: What is the practical difference between smooth nitrile palm coating and a fully coated nitrile glove?
A: A palm-coated glove applies the nitrile coating to the palm and front of fingers only, leaving the back of the hand as uncoated breathable knitted polyester. A fully coated glove covers the entire hand surface including the back. The breathable back of a palm-coated glove allows heat and moisture to escape during sustained wear, reducing the hand fatigue and discomfort that leads to operatives removing gloves mid-task. The trade-off is that a palm-coated glove provides no water ingress protection through the uncoated back. For dry construction and handling environments this is the correct choice. For wet handling, a fully coated waterproof glove is required.
Q: Why should I specify smooth nitrile over a cheaper PVC or latex-coated alternative for my site?
A: Smooth nitrile outperforms PVC coatings on abrasion resistance. The EN388 Level 3 abrasion rating represents 2000 rub cycles before coating failure, extending service life compared with lighter PVC alternatives under daily site use. Nitrile provides consistent grip on dry construction materials and tools without the allergy risk that a natural latex coating introduces across an unscreened workforce. For procurement teams buying in packs of 12 for ongoing site use, the longer service life and latex-free compliance certainty of nitrile reduces both replacement frequency and the risk of allergy-related PPE incidents.
Q: How long should a pair last under regular site or workshop use?
A: Service life depends on task intensity and surface abrasion. The EN388 abrasion resistance of Level 3 represents 2000 cycles before failure, which is a strong result for a lightweight palm-coated glove. Under everyday construction and handling use a pair should last a full working week with correct care. Wipe after each shift and air dry. Do not launder. The nitrile coating at the fingertips and palm will show wear first. Inspect before every shift and replace when thinning or cracking of the coating is visible, or when grip performance drops noticeably on dry surfaces.
Q: How quickly can I get these grip gloves delivered to site?
A: Order by 7pm for next-day delivery nationwide at no extra cost on stocked lines. CMT Group operates its own fleet of vehicles covering over 95% of the UK mainland, not a third-party courier, with live order tracking, real-time ETAs, and What3Words integration for precise delivery to any site compound, gate, or entrance without needing a full postcode. VIP 2-hour delivery is also available from any CMT depot across the UK. Call the sales team for pricing and availability.
Q: How do I know CMT Group stocks the right volume of these gloves for large or ongoing site requirements?
A: CMT Group holds large UK stock positions across its fulfilment centres with no backorders on core PPE lines, so procurement teams can order with confidence across multiple sites and project cycles. For contract customers, the EDGE portal provides agreed pricing, role-based spending controls, live stock visibility, and full delivery tracking from dispatch to drop-off. ISO 9001:2015 accreditation, BSIF Registered Safety Supplier status, CHAS Elite approval, and Crown Commercial Service Supplier status are all independently verified. CMT Group is rated Excellent on Trustpilot with over 400 verified Reviews.io reviews reflecting consistent stock and service reliability across UK construction and engineering projects.
