Surface and whiteboard cleaner spray for site offices, drawing rooms, and welfare units, removing grease and grime from drywipe boards and hard surfaces.
- 250ml trigger spray bottle for controlled application
- Removes grease and grime from whiteboard surfaces
- Suitable for all hard surfaces in site offices
- Works on both magnetic and non-magnetic drywipe whiteboards
- Trigger spray format, no pouring or decanting required
Surface and Whiteboard Cleaner Spray 250ml
Surface and whiteboard cleaner spray for site offices, drawing rooms, and welfare units, removing grease and grime from drywipe boards and hard surfaces.
- 250ml trigger spray bottle for controlled application
- Removes grease and grime from whiteboard surfaces
- Suitable for all hard surfaces in site offices
- Works on both magnetic and non-magnetic drywipe whiteboards
- Trigger spray format, no pouring or decanting required
- Buy 5 for £6.18 £5.15 each and save 13%
- Buy 10 for £5.39 £4.49 each and save 24%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £5.15 £6.18 | £4.49 £5.39 |
Order 1x to earn 5 FASTPoints
Order to earn 5 FASTPoints
Log in to access trade discountsSurface and Whiteboard Cleaner Spray
Surface and whiteboard cleaner spray removes grease and grime from drywipe whiteboard surfaces and all hard surfaces in site offices, drawing rooms, and project administration areas. The 250ml trigger spray format gives direct, controlled application to the area being cleaned without wetting surrounding surfaces or equipment.
Why whiteboard surfaces need a dedicated cleaner
A whiteboard wiped with a dry eraser after each use will eventually develop a grey shadow across the writing surface. This ghosting builds up as residual marker ink is pushed into the surface coating rather than fully removed. Over time, fresh marker becomes harder to read against the residue, and writing that should wipe off cleanly starts to leave traces behind. A dedicated cleaning fluid lifts both fresh and built-up residue from the board surface in a way that dry erasing alone cannot. Applied regularly, it keeps the surface responsive and the writing legible throughout the life of the board.
Key Features
-
Trigger spray format: Applies directly to the surface with no pouring or separate cloth soaking. Controlled coverage reduces product waste on small cleaning tasks.
-
Removes grease and grime: Confirmed functional claim. Effective on both dry marker residue on whiteboards and general surface soiling on hard office surfaces.
-
Suitable for all hard surfaces: Not limited to whiteboards. Suitable for general hard surface cleaning in the same site office or welfare unit environment.
-
250ml size: Practical desk-side or storage shelf size. Easy to keep in a site office stationery store without taking up space.
-
Drywipe and magnetic whiteboard compatible: Works on both surface types.
Who is this for
Trades and roles:
-
Site managers
-
Office administrators
-
Drawing office staff
-
Welfare unit attendants
-
Facilities managers
Industries:
-
Construction
-
Civil engineering
-
Facilities management
-
Professional services
Specifications
| Specification | Detail |
| Product Name | Surface and Whiteboard Cleaner Spray 250ml |
| SKU | KF04552 |
| Type | Surface and whiteboard cleaning fluid |
| Format | Trigger spray |
| Volume | 250ml |
| Function | Removes grease and grime from hard surfaces and whiteboards |
| Suitable Surfaces | All hard surfaces and drywipe whiteboards |
Compatibility
| Application or condition | Status |
| Drywipe whiteboards | ✓ Suitable |
| Magnetic whiteboards | ✓ Suitable |
| Hard surfaces — desks, tables, equipment casings | ✓ Suitable |
| Grease and grime removal from hard surfaces | ✓ Suitable |
| Soft surfaces, upholstery, fabric | ✗ Not confirmed — check label |
| Screens and monitor glass | ✗ Not confirmed — check label |
Who is this for
This cleaner is used by site managers, office administrators, and drawing office staff maintaining drywipe whiteboards in site cabins, project offices, and welfare units. It is suited to any environment where a whiteboard is used daily and needs regular cleaning to prevent marker residue build-up, as well as general hard surface cleaning of desks, tables, and equipment in the same space.
Typical applications
-
Cleaning drywipe whiteboard surfaces after daily use to remove residual marker before it becomes embedded in the surface coating.
-
Removing stubborn or dried marker residue that a dry eraser has not fully cleared.
-
General hard surface cleaning of site office desks, tables, and equipment casings.
-
Maintenance cleaning of welfare unit hard surfaces between deep cleans.
-
Cleaning magnetic whiteboard surfaces before repositioning documents and magnets.
How to use
Step 1: Shake the bottle gently before use.
Step 2: Hold the trigger spray upright and apply directly to the whiteboard surface or the hard surface to be cleaned. Spray from approximately 15 to 20cm distance for even coverage.
Step 3: Wipe with a clean dry cloth or the whiteboard eraser. For stubborn residue, allow the fluid to sit on the surface for a few seconds before wiping.
Step 4: Wipe the surface dry with a clean cloth if any moisture remains.
Step 5: Replace the cap securely after use. Store upright in a cool, dry location away from direct sunlight.
Common mistakes
-
Using a dry eraser only: A dry eraser removes fresh marker but does not fully clear residual ink from the surface coating. Using the cleaner regularly prevents ghost marks from accumulating.
-
Spraying directly onto electronic equipment: Apply to a cloth first when cleaning near screens, keyboards, or any electronic components. Do not spray directly onto electrical equipment.
-
Using on surfaces not confirmed on the label: Always check the product label before applying to surfaces not listed in the confirmed suitability information. Test on a small inconspicuous area first if unsure.
-
Leaving the surface wet: Wipe dry after cleaning. Leaving moisture on a whiteboard surface can affect the next writing session and may leave water marks.
Safety
Use in a well-ventilated area. Avoid contact with eyes. Follow all instructions on the product label. Use in accordance with COSHH Regulations 2002. Do not spray near open flames. Keep out of reach of children. For full safety information, refer to the product Safety Data Sheet.
Maintenance
Wipe the trigger nozzle clean after use. Check the spray mechanism functions correctly before each use. Store upright. Replace the bottle when empty rather than refilling.
Frequently Asked Questions
Q: What surfaces can this be used on?
A: This cleaner is confirmed suitable for all hard surfaces and drywipe whiteboards, including both magnetic and non-magnetic whiteboard types. For surfaces not listed on the product label, test on a small inconspicuous area before applying. Always refer to the label for the complete list of confirmed surfaces.
Q: What is the difference between this and just wiping a whiteboard with a damp cloth?
A: A damp cloth removes surface moisture and some loose residue but does not break down the grease and grime components that cause ghost marks. A dedicated cleaning fluid contains compounds that lift residual marker ink from the board coating rather than simply moving it around. Regular use prevents the gradual build-up that makes boards progressively harder to clean over time.
Q: What is this NOT suitable for?
A: Do not use on soft surfaces, upholstery, or fabric. Do not spray directly onto screens, monitors, or electronic components. For any surface not confirmed on the product label, refer to the product SDS before use. Always follow label instructions.
Q: How often should a whiteboard be cleaned with this fluid?
A: For a whiteboard in daily use in a site office or drawing room, a full clean with spray fluid once or twice a week prevents residue from building up. Between full cleans, a dry eraser is sufficient for fresh marker removal after each session.
Q: Can I use this alongside a whiteboard eraser?
A: Yes. The two products work together. Use the dry eraser (FS070006) for fresh marker after each session and the cleaning spray for a deeper clean to remove any remaining residue. The spray is particularly useful for removing the shadow marks a dry eraser leaves behind over time.
Q: Does the trigger spray need to be held in a specific position?
A: Hold the bottle upright for normal use. Spraying at an extreme angle may affect the pump mechanism on some trigger spray formats. Always replace the cap securely after use and store the bottle upright.
