A 240 litre heavy-duty HDPE two-wheel wheelie bin, EN840 compliant for refuse vehicle collection, for construction sites, commercial premises, and managed properties.
- 100% new HDPE construction, UV resistant
- EN840 compliant, compatible with standard refuse collection vehicles
- 240L capacity
- 730 x 580 x 1010mm body
- 1075mm total height
- Reinforced body structure, tested wheels, metal foot pivot
- Flip lid with separate opening handle
- Available in green, black, grey, yellow, blue, and red
- Do not use for hot ashes, cinders, or unclassified hazardous waste
240 Litre Wheelie Bin - Heavy-Duty Two Wheels
A 240 litre heavy-duty HDPE two-wheel wheelie bin, EN840 compliant for refuse vehicle collection, for construction sites, commercial premises, and managed properties.
- 100% new HDPE construction, UV resistant
- EN840 compliant, compatible with standard refuse collection vehicles
- 240L capacity
- 730 x 580 x 1010mm body
- 1075mm total height
- Reinforced body structure, tested wheels, metal foot pivot
- Flip lid with separate opening handle
- Available in green, black, grey, yellow, blue, and red
- Do not use for hot ashes, cinders, or unclassified hazardous waste
240 Litre Wheelie Bin - Heavy-Duty
A 240 litre heavy-duty HDPE wheelie bin for construction site waste management, commercial premises, and managed properties where a durable, EN840-compliant outdoor container is required. Built from 100% new high-density polyethylene with UV stabilisation, it carries EN840 certification confirming compatibility with standard refuse collection vehicles. Available in six colours for waste stream segregation.
Why EN840 Compliance Matters for Commercial Waste Management
EN840 is the European standard for mobile waste containers. An EN840-compliant bin has been tested and certified for dimensions, wall strength, handle positioning, and wheel specification that meet refuse vehicle operational requirements. Without EN840 certification, a bin may be rejected by a waste contractor or incompatible with the tipping mechanism on a rear-loading or side-loading refuse vehicle. For site managers and facilities buyers procuring bins for kerbside or compound collection, EN840 compliance prevents operational problems before they happen.
Key Features
-
100% new HDPE: Virgin high-density polyethylene, UV stabilised to resist colour fading, surface embrittlement, and cracking from prolonged outdoor exposure. Not recycled material.
-
EN840 compliant: Tested and certified against the European standard for mobile waste containers. Compatible with standard refuse vehicle operation.
-
Two-wheel mobility: Two rear wheels and a hardened metal front foot allow the bin to tilt and roll across hard-standing surfaces. A strong rear handle assists with movement.
-
Reinforced body structure: Ribbed body panels increase rigidity and resistance to impact damage under outdoor site conditions.
-
Flip lid with handle: Hinged lid closes to contain waste and reduce windblown litter. A separate handle allows the lid to be opened without direct contact with the waste.
-
Six colour variants: Green, Black, Grey, Yellow, Blue, and Red for waste stream identification and segregation. See the colour guide in the Applications tab.
Who Is This For
Trades and roles:
-
Site managers and welfare coordinators
-
Facilities managers
-
Waste management coordinators
-
Property managers
-
Environmental officers
Industries:
-
Construction
-
Facilities management
-
Commercial and industrial premises
-
Social housing and managed properties
-
Retail and hospitality
Specifications
| Specification | Detail |
| Product Name | 240 Litre Wheelie Bin - Heavy-Duty Two Wheels |
| Parent SKU | WB240 |
| Capacity | 240 litres |
| Material | 100% new HDPE (High-Density Polyethylene) |
| UV Resistant | Yes |
| Standard | EN840 compliant |
| Wheels | 2 rear wheels |
| Lid Type | Hinged flip lid with opening handle |
| Width (B) | 580mm |
| Depth (C) | 730mm |
| Body Height (D) | 1010mm |
| Total Height with Lid (A) | 1075mm |
| Colours Available | Green, Black, Grey, Yellow, Blue, Red |
Colour variants
|
Green
|
WB240LGRN | Garden and organic waste. Also used for general waste in some local authority schemes. |
|
Black
|
WB240LBLK | General and residual waste. The most common commercial waste stream colour. |
|
Grey
|
WB240LGRY | General and residual waste. Often used alongside black where two general streams require separation. |
|
Yellow
|
WB240LYEL | Clinical, pharmaceutical, or mixed recycling (contractor dependent). Confirm with your waste provider. |
|
Blue
|
WB240LBLU | Mixed recycling: paper, card, plastics, and cans. Standard recycling colour across most UK schemes. |
|
Red
|
WB240LRED | Hazardous, clinical, or confidential waste. Always confirm the correct stream with your waste provider. |
Compatibility
| Application or condition | Status |
| Outdoor use on construction sites and commercial premises | ✓ Compatible |
| General and residual waste collection | ✓ Compatible |
| Mixed recycling (blue variant) | ✓ Compatible |
| Garden and organic waste (green variant) | ✓ Compatible |
| Refuse vehicle collection (EN840 compliant) | ✓ Compatible |
| Year-round outdoor exposure (UV stabilised) | ✓ Compatible |
| Hot ashes, cinders, or burning material | ✗ Not suitable |
| Unclassified hazardous or chemical waste | ✗ Not suitable without appropriate classification and labelling |
| Overfilling beyond 240L or safe moving weight | ✗ Not recommended |
Who Is This For
The 240 litre two-wheel wheelie bin is the standard commercial and site waste container for outdoor use across UK construction, facilities management, and managed property environments. EN840 compliance makes it compatible with standard refuse collection vehicles. The HDPE construction provides the UV-stabilised durability required for year-round outdoor exposure on a managed site or commercial premises. The six colour variants support waste stream segregation across general waste, recycling, organic waste, and specialist streams.
Typical Applications
-
General waste collection on construction sites, commercial premises, and managed properties.
-
Mixed recycling collection using the blue variant, compatible with most UK commercial recycling schemes.
-
Garden and organic waste collection using the green variant on managed properties and landscaped commercial sites.
-
Site compound waste management during active construction, refurbishment, and fit-out projects.
-
Welfare room and site office waste management where a wheeled outdoor bin is required.
-
Social housing estates and managed residential properties with kerbside collection schemes.
-
Retail, hospitality, and industrial premises with regular waste contractor collection.
Colour Guide
Waste bin colour conventions vary by local authority and waste contractor. The guide below reflects common UK commercial practice.
| Colour | SKU | Typical Application |
|---|---|---|
| Green | WB240LGRN | Garden and organic waste. Also used for general waste in some schemes. |
| Black | WB240LBLK | General and residual waste. The most common commercial waste stream colour. |
| Grey | WB240LGRY | General and residual waste, often used alongside black where two streams need visual separation. |
| Yellow | WB240LYEL | Clinical, pharmaceutical, or mixed recycling depending on contractor. Always confirm before use. |
| Blue | WB240LBLU | Mixed recycling: paper, card, plastics, and cans. Standard across most UK commercial recycling schemes. |
| Red | WB240LRED | Hazardous, clinical, or confidential waste. Always confirm the correct stream with your waste provider. |
How to Use
Step 1: Position the bin on a firm, level hard-standing surface in the designated waste storage area.
Step 2: Open the lid using the lid handle to avoid direct contact with the waste inside.
Step 3: Deposit waste into the correct colour bin for the relevant waste stream. Do not deposit hot ashes, cinders, or hazardous materials.
Step 4: Close the lid after each deposit to contain waste, prevent windblown litter, and reduce pest access.
Step 5: To move the bin, grip the rear handle and tilt the bin backwards onto its two rear wheels. Roll it across the hard-standing surface.
Step 6: For refuse vehicle collection, position the bin at the agreed collection point at the kerb or compound entrance before the scheduled collection time.
Common Mistakes
-
Using the wrong colour for a waste stream: colour coding is not nationally standardised. Confirm the correct colour with your waste contractor before purchasing. The wrong colour can result in contaminated collections and extra charges.
-
Overloading: do not fill beyond the 240L capacity or to a weight that makes the bin difficult or unsafe to move. Refuse vehicles have weight limits per container.
-
Depositing hot ashes or cinders: the bin carries a "No hot ashes and cinders" marking. Hot material can melt or distort the HDPE body and create a fire risk.
-
Leaving the lid open: an open lid allows rainwater ingress, windblown litter, and pest access. Close it after every deposit.
-
Storing on uneven or soft ground: a bin on soft or uneven ground can tip during filling or when the lid is opened by wind. Use firm hard standing only.
Safety
Do not deposit hot ashes, cinders, burning material, or any waste that could ignite or melt the HDPE body. Do not deposit hazardous, clinical, or chemical waste without appropriate classification, segregation, and labelling in accordance with the relevant UK waste regulations including the Hazardous Waste Regulations 2005. When moving the bin, ensure the path is clear and the surface is firm. Do not over-fill the bin beyond a safe handling weight. Keep children away from open bins.
Maintenance
Clean the interior periodically with water and a suitable mild cleaning agent. Do not use solvents that may damage the HDPE. Check the lid hinge, wheels, and axle condition at regular intervals. Replace if damaged. Store upright on firm, level ground. If wheels become stiff or damaged, inspect the axle housing and clear any debris. The HDPE body is UV stabilised and does not require painting or surface treatment.
Frequently Asked Questions
Q: What does EN840 compliance mean for a wheelie bin?
A: EN840 is the European standard for mobile waste containers. It defines requirements for dimensions, wall thickness, lid strength, handle positioning, wheel specification, and tipping compatibility with standard refuse collection vehicles. An EN840-compliant bin has been tested against these requirements. This matters for commercial buyers because non-compliant bins may be rejected by a waste contractor or incompatible with the automated tipping mechanism on a rear-loading or side-loading refuse vehicle.
Q: Which colour should I choose for which waste stream?
A: UK waste bin colour conventions vary by local authority and waste contractor. As a general guide: grey and black for general residual waste; blue for mixed recycling; green for garden and organic waste; yellow for clinical or pharmaceutical waste in healthcare settings, or mixed recycling under some commercial schemes; red for hazardous, clinical, or confidential waste. Always confirm the correct colour code for each waste stream with your waste management provider before purchasing. Using the wrong colour can lead to contaminated collections and additional charges.
Q: What is HDPE and why does it matter for an outdoor bin?
A: HDPE stands for high-density polyethylene. This bin is manufactured from 100% new virgin HDPE, not recycled material, giving consistent material properties throughout. The HDPE is UV stabilised to resist colour fading, surface embrittlement, and cracking from prolonged outdoor exposure. For a bin used year-round on a construction site or commercial premises, UV-stabilised virgin HDPE is the specification that determines how long the bin remains serviceable.
Q: Is this bin compatible with a standard refuse collection vehicle?
A: Yes. EN840 compliance confirms it meets the dimensional and mechanical requirements for standard refuse vehicle operation, including rear-loading and side-loading vehicles with automated or semi-automated tipping mechanisms. Confirm compatibility with your specific waste contractor before placing the bin into a collection scheme.
Q: What is this bin NOT suitable for?
A: Do not deposit hot ashes, cinders, or burning material. The bin body can melt or distort under heat. Do not use for hazardous, clinical, chemical, or pharmaceutical waste without appropriate classification, segregation, and labelling under the Hazardous Waste Regulations 2005. Do not overfill beyond 240L or to a weight that makes the bin unsafe to move manually.
Q: How many bins do I need for a construction site?
A: Site Waste Management Plans best practice and general duty of care obligations require separation of waste streams as a minimum. A working guide for sites of 15 or more operatives is one 240L bin per waste stream collected, sized against your collection frequency. A site generating high volumes of recyclable materials may need multiple blue bins. Confirm your requirements against actual waste generation and collection schedule.
Q: Can the bin be used indoors?
A: The bin is designed for outdoor use on hard-standing surfaces. Its 1075mm total height and wheeled base make it suitable for external compound and kerbside placement. For indoor use in a large warehouse, industrial unit, or covered compound, confirm the available space and access route before specifying.
