IP44-rated 4 gang extension lead with a 1m cable for indoor, workshop, and light outdoor power distribution in homes, offices, and commercial environments.
- IP44 rated, splash-resistant from all directions
- UKCA, CE and RoHS certified
- 4 x 13A sockets, 13A plug, 240V
- Neon power indicator
- 1.25mm cable, 1m length
- Maximum total load 13A (3,120W across all sockets)
- White
4 Gang Extension Lead 1m - IP44 Indoor and Outdoor Use
IP44-rated 4 gang extension lead with a 1m cable for indoor, workshop, and light outdoor power distribution in homes, offices, and commercial environments.
- IP44 rated, splash-resistant from all directions
- UKCA, CE and RoHS certified
- 4 x 13A sockets, 13A plug, 240V
- Neon power indicator
- 1.25mm cable, 1m length
- Maximum total load 13A (3,120W across all sockets)
- White
- Buy 5 for £9.06 £7.55 each and save 18%
- Buy 10 for £8.04 £6.70 each and save 28%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £7.55 £9.06 | £6.70 £8.04 |
Order 1x to earn 9 FASTPoints
Order to earn 9 FASTPoints
Log in to access trade discounts4 Gang Extension Lead 1m
IP44-rated 4 gang extension lead providing four 13A sockets from a single 13A plug, built for homes, offices, workshops, and light commercial environments where a compact, splash-resistant power distribution point is required. The 1m cable keeps installations neat and reduces trip hazard without excess cable length, and the IP44 protection rating makes this lead suitable for covered outdoor environments including workshops, garages, and outbuildings where a standard unrated indoor lead would not be appropriate. Certified to UKCA, CE, and RoHS standards.
How IP44 protection extends this extension lead beyond standard indoor use
Standard extension leads carry no IP rating and are tested for indoor use only, with no verified protection against moisture ingress at the socket faces or cable entry points. In a workshop, garage, or covered outdoor area, even low levels of moisture from condensation, cleaning, or proximity to outdoor conditions can reach an unprotected lead. IP44 certification confirms this lead has been independently tested against solid particle ingress and water splashes from any direction, giving it the verified protection rating required for these environments whilst maintaining full compatibility with standard UK 13A plugs and devices.
Key Features
-
IP44 ingress protection: Tested to BS EN 60529 against solid objects greater than 1mm and water splashes from all directions. Suitable for workshops, garages, utility rooms, and covered outdoor areas where standard unrated leads cannot be safely used.
-
UKCA, CE and RoHS certified: Meets UK electrical safety regulations under UKCA marking, European CE standards, and RoHS compliance for restricted hazardous substances. Suitable for UK commercial and residential environments.
-
4 x 13A BS 1363 sockets: Four standard UK 13A socket outlets accommodate all UK plug sizes including bulky transformer plugs. Maximum total load across all four sockets is 13A (3,120W at 240V).
-
Neon power indicator: Built-in neon light confirms the lead is receiving power from the mains, providing a clear visual check in low-light environments such as workshops and garages without the need to trace the cable to the wall socket.
-
1m 1.25mm cable: Short cable length designed for desk, workstation, and fixed installation use. Keeps setups tidy and reduces the trip hazard of excess cable. 1.25mm conductor cross-section rated for the full 13A load at 1m length.
-
13A fused plug: Heavy-duty 13A fused plug for connection to standard UK mains sockets. Replace the fuse only with the correct 13A rated fuse if it blows.
Who is this for
Trades and roles:
-
Office managers and facilities managers
-
Workshop operatives and site welfare teams
-
Electricians specifying extension leads for installations
-
General site and domestic users
Industries:
-
Construction (site welfare, office containers)
-
Light commercial and retail
-
Hospitality and events
-
Residential and home working
Specifications
| Specification | Detail |
| Product Name | 4 Gang Extension Lead 1m - IP44 Indoor and Outdoor Use |
| SKU | EL24W41 |
| Sockets | 4 x 13A BS 1363 |
| Plug | 13A |
| Voltage | 240V |
| Maximum Total Load | 13A (3,120W at 240V across all sockets) |
| Cable Length | 1m |
| Cable Cross-Section | 1.25mm |
| IP Rating | IP44 |
| IP44 Protection | Solid objects over 1mm, water splashes from all directions |
| Power Indicator | Neon (unit power-on indicator) |
| Certifications | UKCA, CE, RoHS |
| Colour | White |
Compatibility
| Application or condition | Status |
| Indoor use: offices, homes, workstations | ✓ Suitable |
| Workshops and garages (covered, no standing water) | ✓ Suitable |
| Covered outdoor areas: marquees, outbuildings, patios | ✓ Suitable |
| Site welfare cabins and portable buildings | ✓ Suitable |
| Light commercial environments: offices, retail, hospitality | ✓ Suitable |
| Total load up to 13A (3,120W) across all sockets | ✓ Suitable |
| Direct outdoor use in rainfall or exposed conditions | ✗ Not suitable |
| Total load exceeding 13A across all sockets | ✗ Not suitable |
| Daisy-chaining with other extension leads | ✗ Not permitted |
| Use coiled or under carpet during operation | ✗ Not suitable |
| Surge protection for sensitive electronics | ✗ Not fitted |
Who is this for
This extension lead is designed for home users, office managers, workshop operatives, and site welfare teams requiring a compact 4-socket power distribution point where moisture, condensation, or light outdoor exposure may be present. The IP44 rating makes it particularly suited to workshops, garages, outbuildings, and covered outdoor areas where standard indoor extension leads without an IP rating cannot be safely installed. The deliberate 1m cable length suits desk, workstation, and fixed installation use rather than flexible repositioning across a room.
Typical applications
-
Powering multiple devices from a single desk or workstation outlet in offices and home working environments where cable management is a priority.
-
Providing a fixed power distribution point in workshops and garages where condensation and light moisture exposure make a standard unrated lead inappropriate.
-
Distributing power to multiple devices in site welfare cabins, office containers, and portable buildings on construction sites.
-
Powering equipment in covered outdoor areas including event marquees, covered patios, and outbuilding workshops.
-
Providing additional socket outlets in utility rooms and kitchens where light moisture exposure may occur.
-
Power distribution in light commercial settings including retail units, hospitality environments, and office breakout areas.
How to use
Step 1: Switch off the mains socket before connecting. Insert the 13A plug fully and switch on.
Step 2: Check the neon indicator is illuminated to confirm the lead is receiving power.
Step 3: Connect devices to the four socket outlets. Add the wattage of all connected devices and confirm the combined total does not exceed 13A (3,120W at 240V).
Step 4: Extend the cable fully before use. Never operate the lead coiled or covered, coiled cable cannot dissipate heat generated during use.
Step 5: For workshop and outdoor use, position the lead to avoid standing water and direct rainfall. IP44 protects against splashes from any direction but not sustained water flow or submersion.
Step 6: Switch off at the mains socket when not in use. Do not leave energised and unattended for extended periods.
Common mistakes
-
Overloading the lead: the four sockets share a single 13A fuse. The combined wattage of all connected devices must not exceed 3,120W. Single high-wattage appliances such as electric fan heaters (2,000 to 3,000W) or kettles (2,200 to 3,000W) can approach the limit alone, check total load before connecting multiple appliances.
-
Using in conditions beyond IP44: IP44 protects against water splashes from any direction. It does not protect against direct rainfall, running water, or submersion. Exposed outdoor use in rain requires a higher IP rating.
-
Daisy-chaining extension leads: connecting one extension lead into another is not safe and is not compliant with IET Wiring Regulations. Always plug directly into a mains wall socket.
-
Operating the lead coiled: a coiled cable cannot dissipate heat. Always fully uncoil and extend the lead before use, particularly under full load.
-
Routing under carpets or against heat sources: cable routed under a carpet, through a wall, or against a heat source cannot ventilate and will overheat. Keep the cable clear of obstructions and heat sources at all times.
Safety
This extension lead is rated for a maximum total load of 13A (3,120W at 240V) across all four sockets. Do not exceed this limit. IP44 protection covers splashes from any direction but not direct rainfall, running water, or submersion, use in sheltered locations only. Never daisy-chain with other extension leads. Always fully uncoil the cable before use. Do not route under carpets, through walls, or against heat sources. This lead does not incorporate surge protection. Replace the plug fuse only with a 13A rated fuse. Certified to UKCA, CE, and RoHS standards.
Maintenance
Inspect the cable, plug, and all socket faces before each use. Do not use if the cable is cut or damaged, the plug casing is cracked, or any socket face is visibly damaged or deformed. Keep socket faces free from debris. Clean with a dry cloth only, never use water, solvents, or abrasive cleaners directly on sockets or cable. Do not attempt to repair a damaged lead. Store loosely coiled in a dry location when not in use.
Frequently Asked Questions
Q: What does IP44 mean and where can this extension lead be used safely?
A: IP44 is an ingress protection rating defined under BS EN 60529. The first digit (4) confirms protection against solid objects greater than 1mm in diameter. The second digit (4) confirms protection against water splashes from any direction. This makes the lead suitable for workshops, garages, covered outdoor areas, utility rooms, and other environments where condensation or light moisture exposure is possible. It is not rated for direct rainfall, sustained water exposure, or submersion — for fully exposed outdoor use, a higher IP rating would be required.
Q: What is the maximum total load across all four sockets?
A: The four sockets share a single 13A plug and fuse, so the maximum combined load across all four sockets is 13A, equivalent to 3,120W at 240V. To stay within this limit, add the wattage of every device connected simultaneously. High-wattage appliances such as electric heaters, kettles, and power tools can approach the full limit on their own. Connecting multiple high-wattage appliances at the same time can exceed 13A and will blow the plug fuse.
Q: Can I connect this extension lead into another extension lead to reach further?
A: No. Daisy-chaining extension leads is not safe practice and is not permitted under IET Wiring Regulations. It increases the risk of overloading the first lead, creates additional connection points that can overheat, and removes the protection provided by the original mains socket. If greater reach is required, use a single extension lead of the appropriate length rather than connecting two leads in series.
Q: What is this extension lead NOT suitable for?
A: This lead is not suitable for use in direct rainfall or exposed outdoor conditions without overhead cover — IP44 protects against splashes, not sustained rain. It must not be used with total device loads exceeding 13A (3,120W). It must not be daisy-chained into another extension lead. It must not be used coiled or run under carpets or against heat sources during operation. It does not incorporate surge protection and should not be relied upon to protect sensitive electronics against power surges.
Q: Does the neon indicator mean the sockets can be switched on and off?
A: The neon indicator is a power-on light showing that the lead is receiving power from the mains socket it is connected to. It is not a switch. All four sockets are live whenever the lead is plugged in and the mains socket is switched on. To de-energise all sockets, switch off or unplug at the mains wall socket.
Q: Is 1.25mm cable sufficient for the full 13A load at 1m?
A: Yes. A 1.25mm conductor cross-section is rated to carry 13A safely at a 1m cable length. Cable current-carrying capacity is not significantly derated at short lengths, and 1.25mm at 1m presents no thermal concern at full 13A load. For longer extension leads carrying the same current, a heavier conductor such as 1.5mm would typically be specified to manage volt drop and heat generation over the greater length.
