A 90 litre oil-only spill kit in a compact UV and impact-resistant yellow plastic drum for vehicle cabs, forklift trucks, and tight plant areas. Supports ISO 14001 and Environment Agency PPG compliance.
Oil-only. Not for chemical or water-based spills.
- Oil-only absorbents for petroleum oils, diesel, petrol, and hydraulic fluid
- 45 absorbent pads
- 6 absorbent socks
- 2 hazard waste bags
- UV and impact-resistant yellow plastic drum with clip-on lid
- Compact portable format for vehicle cabs, forklift trucks, and plant
- Drum reusable as a temporary waste container after the kit is deployed
- Supports ISO 14001 and Environment Agency PPG pollution prevention guidance
90 Litre Oil-Only Spill Kit - Plastic Drum with Pads Socks and Hazard Bags
A 90 litre oil-only spill kit in a compact UV and impact-resistant yellow plastic drum for vehicle cabs, forklift trucks, and tight plant areas. Supports ISO 14001 and Environment Agency PPG compliance.
Oil-only. Not for chemical or water-based spills.
- Oil-only absorbents for petroleum oils, diesel, petrol, and hydraulic fluid
- 45 absorbent pads
- 6 absorbent socks
- 2 hazard waste bags
- UV and impact-resistant yellow plastic drum with clip-on lid
- Compact portable format for vehicle cabs, forklift trucks, and plant
- Drum reusable as a temporary waste container after the kit is deployed
- Supports ISO 14001 and Environment Agency PPG pollution prevention guidance
- Buy 3 for £157.40 £131.17 each and save 4%
- Buy 6 for £150.05 £125.04 each and save 9%
| BULK DISCOUNT | 3 | 6 |
|---|---|---|
| Price | £131.17 £157.40 | £125.04 £150.05 |
Order 1x to earn 137 FASTPoints
Order to earn 137 FASTPoints
Log in to access trade discounts90 Litre Oil-Only Spill Kit
A 90 litre oil-only spill kit supplied in a compact yellow plastic drum for rapid deployment in vehicle cabs, on forklift trucks, at refuelling points, and in plant areas where a full wheelie bin is impractical. The drum is UV-resistant and impact-resistant for outdoor and vehicle storage. After the absorbents are deployed, the drum can be reused as a temporary waste container for used absorbents pending licensed collection.
This kit is oil-only. It must not be used for chemical spills, acid spills, or water-based fluid spills.
Why the Drum Format Matters for Mobile and Confined Spill Response
A 120 or 240 litre wheelie bin is effective at a fixed compound refuelling point but cannot be stored in a vehicle cab or carried on a forklift truck. The 90L plastic drum fits the compact deployment requirements of a mobile plant operator, a groundworker working at a remote location, or a refuelling operative whose spill risk moves with them across the site. The clip-on lid keeps the kit secure during transport. The round drum form sits stably in vehicle storage bays and plant cabs without shifting.
Key Features
-
Compact yellow plastic drum: Fits in vehicle cabs, forklift truck storage bays, and confined plant areas where a wheelie bin cannot be positioned.
-
UV and impact-resistant: Withstands outdoor exposure and the physical impact of vehicle and plant environments without cracking or degrading.
-
Clip-on lid: Keeps the kit contents secure during transport and prevents rainwater ingress.
-
45 oil-only absorbent pads: For bulk absorption of petroleum oil, diesel, petrol, and hydraulic fluid spills.
-
6 oil-only absorbent socks: For containing the spill perimeter before pad deployment.
-
2 hazard waste bags: For correct disposal of used oil-contaminated absorbents as controlled waste.
-
Drum reuse: After the absorbents are deployed, the drum can be reused as a temporary sealed container for used absorbents, pending collection by a licensed hazardous waste contractor.
-
ISO 14001 and PPG support: The kit supports compliance with ISO 14001 environmental management systems and the Environment Agency's Pollution Prevention Guidance for oil spill response on construction sites and industrial premises.
Who Is This For
Trades and roles:
-
Plant operators and groundworkers at remote site locations
-
Forklift truck operators in warehouses and plant yards
-
Vehicle fleet operatives carrying fuel in transit
-
Site managers equipping vehicles and plant with spill response
-
Environmental officers supporting ISO 14001 compliance
Industries:
-
Construction and groundworks
-
Plant hire and maintenance
-
Warehousing and logistics
-
Engineering and manufacturing
Specifications
| Specification | Detail |
| Product Name | 90 Litre Oil-Only Spill Kit - Plastic Drum with Pads Socks and Hazard Bags |
| SKU | SK90L |
| Absorbency Capacity | 90 litres |
| Absorbent Type | Oil-only (hydrophobic polypropylene) |
| Suitable Liquids | Petroleum oil, diesel, petrol, lubricants, hydraulic fluid |
| NOT Suitable For | Chemical spills, acids, solvents, water-based fluids |
| Container | Yellow plastic drum with clip-on lid |
| Drum Properties | UV-resistant, impact-resistant |
| Drum Reuse | Yes, as temporary waste container after deployment |
| Compliance Support | ISO 14001, Environment Agency PPG pollution prevention guidance |
Kit contents
| Item | Quantity and Detail |
| Plastic drum with clip-on lid | 1x yellow, UV and impact-resistant |
| Absorbent pads (oil-only) | 45x |
| Absorbent socks (oil-only) | 6x |
| Hazard waste bags | 2x |
Compatibility
| Application or condition | Status |
| Petroleum oils and lubricants | ✓ Compatible (oil-only) |
| Diesel and derv | ✓ Compatible (oil-only) |
| Petrol and aviation fuel | ✓ Compatible (oil-only) |
| Hydraulic fluid and mineral oils | ✓ Compatible (oil-only) |
| Vehicle cab and forklift truck storage | ✓ Compatible (compact drum format) |
| Outdoor storage and UV exposure | ✓ Compatible (UV-resistant drum) |
| Chemical spills (acids, alkalis, solvents) | ✗ NOT SUITABLE |
| Water-based fluids and coolants | ✗ NOT SUITABLE |
| Disposal of used absorbents in general waste | ✗ Hazardous waste - licensed contractor required |
Who Is This For
The 90 litre oil-only spill kit in a plastic drum is for plant operators, groundworkers, forklift truck drivers, and vehicle fleet operatives who need immediate oil spill response at locations where a wheelie bin kit is too large or impractical. The compact drum fits in vehicle storage bays, plant cabs, and tight plant yard areas. It is also suitable as a fixed kit at smaller refuelling points, drum storage areas, and maintenance bays. It supports ISO 14001 environmental management requirements and aligns with Environment Agency Pollution Prevention Guidance (PPG) for oil spill response.
This kit is oil-only. Not for chemical or water-based spills.
Typical Applications
-
Carried in plant cabs and forklift trucks for immediate response to hydraulic fluid or diesel spills at the point of operation.
-
Stored in commercial vehicles carrying fuel or oil for rapid roadside spill response.
-
Sited at smaller refuelling points, drum storage areas, and maintenance bays where a 120L wheelie bin would be disproportionate.
-
Supporting ISO 14001 environmental management system requirements for spill prevention and response on construction and industrial sites.
-
Demonstrating compliance with Environment Agency PPG pollution prevention guidance at oil storage and refuelling points.
How to Use
Step 1: Remove the clip-on lid and take the kit to the spill point. The drum is compact enough to carry by hand.
Step 2: Deploy the 6 socks around the spill perimeter to form a containment berm.
Step 3: Deploy the 45 pads flat over the contained spill for bulk absorption.
Step 4: Wipe any residual surface film with the final pads.
Step 5: Place all used absorbents in the 2 hazard waste bags and seal.
Step 6: The drum can now be used as a temporary sealed container for the sealed hazard bags until licensed collection.
Step 7: Arrange licensed hazardous waste disposal and document the incident. Restock the kit.
Common Mistakes
-
Using oil-only absorbents on chemical spills: ineffective on chemicals and water-based fluids. Use a universal kit for those risks.
-
Disposing of used absorbents in general waste: hazardous waste under the Environmental Protection Act 1990.
-
Not restocking after a deployment: a used kit provides no protection. Reorder immediately.
-
Not positioning the kit at the highest-risk point: if carried in a vehicle cab, ensure it can be reached and deployed within seconds of a spill occurring.
Safety
Oil-only. Not for chemical, acid, solvent, or water-based fluid spills. Used absorbents are hazardous waste. Dispose via a licensed contractor and retain waste transfer notes. Document every incident in the site environmental log.
Frequently Asked Questions
Q: What is the difference between this kit and the SK120L wheelie bin kit?
A: The SK90L is supplied in a compact round plastic drum rather than a wheeled bin. The drum format is smaller, portable by hand, and designed for vehicle cabs, forklift trucks, and locations where a wheelie bin cannot be positioned or transported. The SK120L provides greater absorbency (120L vs 90L) in a wheeled mobile format suited to fixed site locations. Both are oil-only kits.
Q: Can this kit be stored in a vehicle cab or on a forklift truck?
A: Yes. The compact round drum is designed for vehicle and plant storage. The clip-on lid keeps the contents secure during transport and prevents rainwater ingress. The UV-resistant and impact-resistant drum withstands the physical environment of vehicle and plant storage.
Q: What does oil-only mean and what spills is this for?
A: Oil-only absorbents absorb petroleum-based oils, diesel, petrol, lubricants, and hydraulic fluids while repelling water. This kit is not suitable for chemical spills, acids, or water-based fluids. For mixed or unknown spill types, specify a universal spill kit.
Q: How does this kit support ISO 14001 compliance?
A: ISO 14001 requires organisations to identify environmental risks, establish controls, and demonstrate active management of those risks. Having a correctly specified and maintained oil spill kit at oil risk points (refuelling, drum storage, plant operation) is a practical control that supports the environmental management objectives ISO 14001 requires. This kit also aligns with the Environment Agency's Pollution Prevention Guidance (PPG) for oil storage and spill response.
Q: Can the drum be reused after the kit is deployed?
A: Yes. After the absorbents have been removed and placed in the hazard waste bags, the drum can be used as a temporary sealed container for the sealed waste bags pending licensed collection. It is not suitable for permanent waste storage and must not be used for liquids.
Q: What do I do with used absorbents?
A: Place in the 2 included hazard waste bags, seal, and arrange disposal through a licensed hazardous waste contractor. Oil-contaminated absorbents are hazardous waste under the Environmental Protection Act 1990. Document the disposal with waste transfer notes.
