MAX Crinkle Latex Palm Coated Grip Gloves - Construction and General Handling

Who is this for

Crinkle latex palm coated grip gloves at this specification are used primarily by construction operatives, site labourers, mechanical engineers, and general handling workers who carry out everyday material handling, tool use, and site tasks requiring reliable grip and hand comfort throughout a full shift. The 13-gauge construction and breathable back make these gloves suited to tasks where dexterity and extended wear comfort are as important as the grip function itself. Procurement teams sourcing general handling PPE for construction sites, engineering workshops, and facilities management operations will find these gloves meet EN388:2016+A1:2018 requirements for general mechanical risk under the Personal Protective Equipment at Work Regulations 1992, with UKCA marking confirmed by SATRA type examination.

Typical applications

• General construction material handling including bricks, blocks, timber, aggregates, and site consumables where grip on rough and irregular surfaces is required throughout the shift.

• Tool handling and site equipment use on construction and civil engineering sites where close-fitting dexterity allows precise tool control alongside hand protection.

• Mechanical and engineering assembly and maintenance tasks in workshop environments where general handling protection and tactile sensitivity are both required.

• Warehouse and logistics picking, packing, and general goods handling where breathable comfort during continuous wear reduces hand fatigue across extended shifts.

• Facilities management maintenance tasks involving general material and equipment handling where a lightweight, breathable grip glove is required for everyday tasks.

• Light demolition and site clearance tasks involving rough materials, debris, and general site waste handling where grip and basic mechanical protection are the primary requirements.

How to use

Step 1: Select the correct size. At 13 gauge, correct sizing is important for maintaining the close fit that preserves tactile sensitivity and grip performance.

Step 2: Pull the glove fully over the hand, ensuring all fingers are completely seated with the crinkle latex coating covering the full palm and finger surface. Check that no liner bunching is visible at the fingertips.

Step 3: Seat the elasticated knitted cuff flat against the wrist before beginning work.

Step 4: Inspect the crinkle latex coating before each use. Check the palm and fingertips for thinning, cracking, or visible wear. Replace when the crinkle texture is visibly worn smooth or the coating shows any deterioration.

Step 5: After use, wipe with a damp cloth to remove dust, debris, and light contamination. Air dry before storing.

Step 6: Replace when the crinkle latex shows visible wear, the liner thins at the fingertips, or grip performance drops noticeably on dry surfaces.

Common mistakes

• Using for cut or puncture hazard tasks: The EN388 rating confirms low cut and puncture resistance. These are general handling grip gloves. They must not be used for tasks involving sharp blades, sheet metal, rebar, or significant cut hazard on construction sites.

• Using for sustained wet or waterproof handling: This is a palm coated glove. The uncoated back and knitted liner are not waterproof. For wet concrete handling, drainage work, or sustained water contact, a fully coated waterproof glove is required.

• Selecting the wrong size: At 13 gauge, an oversized glove creates fingertip bunching that reduces tactile feedback and grip precision. Size accurately for the best performance.

• Using for chemical handling: These gloves carry no EN374 rating and must not be used for chemical splash or chemical immersion tasks.

• Operatives with latex allergy using these gloves: These gloves contain natural latex. Any operative with a confirmed or suspected latex sensitivity must not use them.

Safety

These gloves are certified to EN388:2016+A1:2018 (2121X), UKCA marked CAT II, with UKCA type examination by SATRA Approved Body 0321. They are general handling grip gloves providing basic mechanical protection for everyday construction and general handling tasks. They provide low cut and puncture resistance and must not be used for tasks involving sharp blades, rebar, or significant cut hazard. They are not waterproof and must not be used for sustained wet handling. They carry no chemical protection rating. Operatives with confirmed or suspected latex allergy must not use these gloves. A task-specific risk assessment under the Personal Protective Equipment at Work Regulations 1992 should confirm suitability before use.

Maintenance

Wipe with a damp cloth after use to remove dust, debris, and light contamination. Air dry fully at room temperature before storing. Store in dry conditions away from direct sunlight, heat sources, and ozone. Inspect the crinkle latex coating at the palm and fingertips before every use. Replace when the texture is visibly worn smooth, when thinning or cracking of the coating is present, or when the liner shows wear at the fingertips.