IP44-rated 4 gang extension lead with a 2m cable for indoor, workshop, and light outdoor power distribution in homes, offices, and commercial environments.
- IP44 rated, splash-resistant from all directions
- UKCA, CE and RoHS certified
- 4 x 13A sockets, 13A plug, 240V
- Neon power indicator
- 1.25mm cable, 2m length
- Maximum total load 13A (3,120W across all sockets)
- White
4 Gang Extension Lead 2m - IP44 Indoor and Outdoor Use
IP44-rated 4 gang extension lead with a 2m cable for indoor, workshop, and light outdoor power distribution in homes, offices, and commercial environments.
- IP44 rated, splash-resistant from all directions
- UKCA, CE and RoHS certified
- 4 x 13A sockets, 13A plug, 240V
- Neon power indicator
- 1.25mm cable, 2m length
- Maximum total load 13A (3,120W across all sockets)
- White
- Buy 5 for £7.73 £6.44 each and save 6%
- Buy 10 for £7.19 £5.99 each and save 12%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £6.44 £7.73 | £5.99 £7.19 |
Order 1x to earn 6 FASTPoints
Order to earn 6 FASTPoints
Log in to access trade discounts4 Gang Extension Lead 2m
IP44-rated 4 gang extension lead providing four 13A sockets from a single 13A plug, with a 2m cable giving greater reach across rooms, workshops, and light commercial spaces whilst maintaining a tidy, managed cable run. The IP44 protection rating makes this lead suitable for covered outdoor environments including workshops, garages, and outbuildings where standard unrated indoor leads are not appropriate, and the 2m cable length bridges the gap between a fixed desk installation and situations where the mains socket sits further from the equipment. Certified to UKCA, CE, and RoHS standards.
How IP44 protection makes this extension lead suitable where standard leads cannot be used
An extension lead without an IP rating has not been tested against moisture ingress. In a workshop or garage, condensation from temperature changes, water from cleaning, and proximity to outdoor conditions all create low-level moisture exposure that an unrated lead has no verified ability to withstand. IP44 certification confirms this lead has been independently tested against solid particle ingress of objects greater than 1mm and water splashes from any direction, giving it the verified protection required for these environments. The 2m cable provides the practical reach to position the lead where it is needed without stretching a shorter cable under load.
Key Features
-
IP44 ingress protection: Independently tested against solid objects greater than 1mm and water splashes from all directions under BS EN 60529. Suitable for workshops, garages, utility rooms, and covered outdoor areas where standard unrated extension leads should not be used.
-
UKCA, CE and RoHS certified: Meets UK electrical safety regulations under UKCA marking, European CE standards, and RoHS compliance for restricted hazardous substances. Appropriate for UK residential, commercial, and light industrial environments.
-
4 x 13A BS 1363 sockets: Four standard UK 13A socket outlets for simultaneous connection of multiple devices. Maximum combined load across all four sockets is 13A (3,120W at 240V), not 13A per socket.
-
Neon power indicator: A built-in neon light confirms the unit is receiving power from the mains. Useful in low-light environments such as garages, workshops, and behind furniture where tracing the cable to the wall socket is not practical.
-
2m 1.25mm cable: Two metres of cable provides practical reach across a workbench, room, or welfare cabin without the excess length of a longer lead. The 1.25mm conductor cross-section is rated for the full 13A load at this cable length.
-
13A fused plug: Standard UK 13A fused plug for direct connection to any mains wall socket. Replace the fuse only with the correct 13A rated fuse if it blows.
Who is this for
Trades and roles:
-
Workshop operatives and site welfare teams
-
Office and facilities managers
-
Electricians specifying installation extension leads
-
General site, domestic, and light commercial users
Industries:
-
Construction (site welfare, office containers)
-
Light commercial and retail
-
Hospitality and events
-
Residential and home working
Specifications
| Specification | Detail |
| Product Name | 4 Gang Extension Lead 2m - IP44 Indoor and Outdoor Use |
| SKU | B4W2MP |
| Sockets | 4 x 13A BS 1363 |
| Plug | 13A fused |
| Voltage | 240V |
| Maximum Total Load | 13A (3,120W at 240V across all sockets) |
| Cable Length | 2m |
| Cable Cross-Section | 1.25mm |
| IP Rating | IP44 |
| IP44 Protection | Solid objects over 1mm, water splashes from all directions |
| Power Indicator | Neon (unit power-on indicator) |
| Certifications | UKCA, CE, RoHS |
| Colour | White |
Compatibility
| Application or condition | Status |
| Indoor use: offices, homes, workstations, living areas | ✓ Suitable |
| Workshops and garages (covered, no standing water) | ✓ Suitable |
| Covered outdoor areas: marquees, outbuildings, patios | ✓ Suitable |
| Site welfare cabins and portable buildings | ✓ Suitable |
| Light commercial environments: offices, retail, hospitality | ✓ Suitable |
| Total load up to 13A (3,120W) across all sockets | ✓ Suitable |
| Direct outdoor use in rainfall or exposed conditions | ✗ Not suitable |
| Total load exceeding 13A across all sockets | ✗ Not suitable |
| Daisy-chaining with other extension leads | ✗ Not permitted |
| Use coiled or under carpet during operation | ✗ Not suitable |
| Surge protection for sensitive electronics | ✗ Not fitted |
Who is this for
This extension lead is suited to home users, office managers, workshop operatives, and site welfare teams who need four socket outlets with IP44 weather resistance and enough cable length to bridge the gap between the mains socket and the equipment without pulling a short cable tight. The 2m length makes it more versatile than a 1m desk lead whilst remaining compact enough to avoid cable management problems in smaller spaces. The IP44 rating extends its suitability to workshops, garages, and covered outdoor areas where moisture or condensation is a factor.
Typical applications
-
Powering multiple devices from a single mains socket across a room or workbench where a 1m cable does not reach without repositioning equipment.
-
Providing a splash-resistant power distribution point in workshops and garages where condensation and light moisture exposure rule out standard unrated leads.
-
Distributing power to multiple devices in site welfare cabins, office containers, and portable buildings where the socket is not immediately adjacent to the equipment.
-
Powering equipment in covered outdoor settings such as marquees, covered patios, event spaces, and outbuilding workshops.
-
Supplementing socket provision in living rooms, bedrooms, and home offices where the mains socket is positioned away from the furniture layout.
-
Power distribution in light commercial environments including retail counters, hospitality bars, and office meeting rooms.
How to use
Step 1: Switch off the mains socket before connecting. Insert the 13A plug fully and switch on.
Step 2: Confirm the neon indicator is illuminated, showing the lead is receiving power.
Step 3: Before connecting devices, add the wattage of all items to be plugged in simultaneously and confirm the total does not exceed 13A (3,120W at 240V).
Step 4: Lay the cable out fully before energising the lead. Never operate under load with the cable coiled or bundled, a coiled cable cannot dissipate heat generated by current flow.
Step 5: For workshop and outdoor use, position the lead to avoid standing water or direct rain. IP44 protects against splashes but not sustained water exposure.
Step 6: Switch off at the mains socket when the lead is not in use. Do not leave energised and unattended for extended periods.
Common mistakes
-
Overloading the lead: all four sockets share a single 13A fuse and a maximum combined load of 3,120W. A single electric fan heater at 3,000W leaves virtually no headroom for any other connected device. Calculate the combined wattage of everything connected before use.
-
Treating IP44 as fully weatherproof: IP44 covers splashes from any direction. It does not cover direct, sustained rainfall or running water over the unit. Always install in a covered location rather than fully exposed outdoor conditions.
-
Daisy-chaining extension leads: plugging one extension lead into another is prohibited under IET Wiring Regulations and is a recognised fire and electrical shock hazard. Connect only to a mains wall socket.
-
Running the cable under a mat or carpet: covered cable cannot ventilate during operation. Even at moderate load, a cable trapped under a floor covering can overheat. Keep the full cable length exposed and clear.
-
Assuming each socket has its own 13A capacity: all four sockets draw from one shared 13A circuit. The total across all four, not each individual socket, is the limit.
Safety
This extension lead carries a maximum total load of 13A (3,120W at 240V) across all four sockets. IP44 protection applies to splashes from any direction, not direct rain, running water, or submersion. Never daisy-chain into another extension lead. Always extend the full cable before use. Keep the cable away from carpets, coverings, and heat sources. No surge protection is fitted. Replace the plug fuse only with a 13A rated fuse. Certified to UKCA, CE, and RoHS standards.
Maintenance
Inspect the cable, plug, and all socket faces before each use. Remove from service immediately if the cable is damaged, the plug casing is cracked, or any socket face is deformed or damaged. Keep socket faces clear of debris. Wipe clean with a dry cloth only. Never use water, solvents, or abrasive cleaners on the sockets or plug. Do not attempt to repair a damaged lead. Store loosely coiled in a dry location when not in use.
Frequently Asked Questions
Q: What does IP44 mean for this extension lead and where can I use it safely?
A: IP44 is defined under BS EN 60529. The first digit (4) confirms protection against solid objects greater than 1mm. The second digit (4) confirms protection against water splashes from any direction. This makes the lead suitable for workshops, garages, covered outdoor areas, utility rooms, and environments where condensation or light moisture exposure is likely. It is not rated for direct rainfall, sustained water flow, or submersion. Always install in a location with overhead cover rather than in fully exposed outdoor conditions.
Q: What is the maximum load I can run across all four sockets?
A: The four sockets share a single 13A fuse, so the combined load across all four outlets must not exceed 13A (3,120W at 240V). To calculate your load, add the wattage printed on each device you intend to connect simultaneously. High-wattage appliances such as fan heaters (2,000 to 3,000W), kettles (2,200 to 3,000W), and some power tools can approach the full 13A limit on their own. Never assume each socket can independently carry 13A.
Q: Why choose a 2m lead over a 1m lead?
A: A 1m cable is designed for fixed desk and workstation installations where the mains socket is immediately adjacent to the equipment. A 2m cable provides practical reach across a workbench, across a room, or into a welfare cabin where the socket is not adjacent without pulling the cable taut under load, which can stress the connections at both ends. For most room and workshop applications, 2m provides the right balance between reach and cable management.
Q: Can I connect this into another extension lead to get more reach?
A: No. Daisy-chaining extension leads is not permitted under IET Wiring Regulations. It overloads the connection at the first lead's socket, creates additional unprotected connection points, and increases the risk of overheating, fire, and shock. If 2m is not sufficient, use a single extension lead of the appropriate longer length rather than connecting two leads in series.
Q: What is this lead NOT suitable for?
A: This lead is not suitable for use in direct, sustained rainfall or fully exposed outdoor conditions without cover. It must not carry a total load exceeding 13A across all four sockets. It must not be daisy-chained into another extension lead. It must not be used coiled, under carpet, or against heat sources. It provides no protection against power surges, for surge-sensitive electronics, a dedicated surge-protected extension lead is required.
Q: Does the neon indicator switch the sockets on and off?
A: No. The neon indicator is a power-on light that illuminates when the lead is receiving power from the mains. All four sockets are simultaneously live whenever the lead is plugged in and the mains socket is switched on. To de-energise all sockets, switch off or disconnect at the mains wall socket.
