MAXTEC HCS Jigsaw Blade 100mm 8 TPI - Hardwood and MDF Cutting - Pack of 5

MAXTEC HCS Jigsaw Blade 100mm 8 TPI

A 100mm HCS jigsaw blade with an 8 TPI tooth pattern that balances cutting speed with finish quality on hardwood, MDF, and laminate materials. The 8 TPI specification sits between the aggressive 6 TPI fast cut and the finer 10 TPI clean cut, making it the practical choice for site joinery, door trimming, worktop cutouts, and general finish carpentry where both speed and a usable cut edge are required. HCS construction provides the flexibility and durability needed for controlled cuts through dense and engineered wood materials under load. Universal T-shank fitment is compatible with most jigsaw brands on the UK market.

Why Choose the MAXTEC HCS Jigsaw Blade 100mm 8 TPI

• 8 TPI balanced cut: sits between fast coarse cutting and fine finish cutting, delivering productive speed with a clean enough edge for finish carpentry and joinery work.

• HCS construction: flexible and durable high carbon steel body handles the load of cutting through dense hardwood and engineered boards without fracturing.

• Optimised for controlled cuts under load: the tooth geometry maintains cutting accuracy on dense materials where softer blades flex and wander off the cut line.

• Suitable for laminates: the 8 TPI pattern cuts laminates without the excessive chipping that coarser blades cause on faced surfaces.

• Universal T-shank fitment: compatible with most jigsaw brands without an adaptor.

• Pack of 5: trade quantity for site joinery and finish carpentry trades.

What's Included

• 5 x MAXTEC HCS Jigsaw Blades, 100mm, 8 TPI, T-shank

 Specifications

 Compatibility

Who Is This For?

Site joiners, finish carpenters, kitchen fitters, and general construction trades who carry out hardwood, MDF, and laminate cutting where both cutting speed and a clean finish are required. Suited to door trimming, worktop cutouts, and general finish carpentry where a coarse blade would leave too rough an edge and a fine blade would cut too slowly.

Typical Applications

• Door trimming and fitting during joinery and installation work

• Worktop cutouts for sinks, hobs, and appliances during kitchen installation

• Cutting hardwood flooring and decking during installation work

• Cutting MDF panels and sheet material during fitting and joinery work

• Cutting laminates and faced boards during kitchen and furniture installation

• General finish carpentry cutting where balanced speed and finish quality are required

How to Use

1. Confirm your jigsaw accepts universal T-shank fitment before fitting.

2. Insert the blade into the jigsaw clamp and secure firmly before operating.

3. Set the jigsaw to a medium speed with low orbital setting for hardwood and laminate cutting.

4. Apply steady, controlled forward pressure without forcing through dense material.

5. For laminate cutting, score the cut line first with a sharp blade to reduce face chipping.

6. Replace when cutting performance deteriorates or teeth show visible wear.

Safety

• Eye protection to EN 166 is mandatory for all jigsaw operations.

• Wear cut-resistant gloves to EN 388 when handling and fitting blades.

• Secure the workpiece firmly before cutting.

• Never exceed the jigsaw manufacturer's recommended speed for the blade in use.

Maintenance

• Inspect teeth before each use for chipping or damage.

• Clean resin and MDF dust from the blade after use before storage.

• Store blades flat in a dry environment to prevent corrosion.

• Replace when cutting performance deteriorates rather than forcing a worn blade.

Frequently Asked Questions

Q: What is the difference between this 8 TPI blade and the 10 TPI bi-metal hardwood blade?

 A: The 8 TPI HCS blade cuts faster than the 10 TPI blade with a slightly rougher finish. The 10 TPI bi-metal blade cuts more slowly but produces a cleaner edge and maintains its cutting performance longer on dense hardwood and MDF. Use 8 TPI where balanced speed and finish are needed, and 10 TPI bi-metal where maximum cut quality and blade life on dense materials are the priority.

Q: Can this blade cut laminates without chipping the face?

 A: Yes, with correct technique. Score the cut line first with a sharp blade, use a lower orbital setting, and feed slowly to minimise vibration at the cut face. For very fine laminate work where no chipping is acceptable, a higher TPI bi-metal blade will produce a cleaner edge.

Q: Will this blade fit my jigsaw?

 A: The universal T-shank fitment is compatible with most jigsaw brands sold in the UK. Confirm your jigsaw accepts T-shank blades before ordering.

Q: Can this blade cut timber containing nails?

 A: No. HCS construction will fracture on nail and fixing contact. For timber containing embedded nails or fixings, use a bi-metal jigsaw blade.

Q: Why should I order from CMT Group?

 A: CMT Group has supplied UK construction sites since 2010 with next working day delivery on a FORS Silver accredited fleet covering 90% of the UK mainland. Orders placed online by 7pm qualify for next day delivery. CMT's EDGE portal provides agreed contract pricing for trade accounts.