A heavy duty cotton interlock lined, fully coated nitrile glove built for construction, waste management, and local authority operatives handling rough, abrasive, and contaminated materials.
- Full nitrile coating: Complete hand coverage against oils, hydrocarbons, and abrasive materials with no exposed liner
- Cotton interlock liner: More durable and comfortable under sustained heavy use than standard cotton jersey alternatives
- EN388 abrasion resistance level 4: Maximum abrasion rating of 8000 cycles, reflecting the heavy duty nitrile coating's long service life on rough and abrasive tasks
- Cotton knit wrist closure: Keeps dust, debris, and contamination out during ground-level and waste handling tasks
- Certification: EN388:2016 rated 4111X, CE and UKCA marked
- Sizes: XL (10)
- Pack quantity: 12 pairs per pack
Polyco Matrix Heavy Duty Full Nitrile Coated Gloves - Construction and Waste Management
A heavy duty cotton interlock lined, fully coated nitrile glove built for construction, waste management, and local authority operatives handling rough, abrasive, and contaminated materials.
- Full nitrile coating: Complete hand coverage against oils, hydrocarbons, and abrasive materials with no exposed liner
- Cotton interlock liner: More durable and comfortable under sustained heavy use than standard cotton jersey alternatives
- EN388 abrasion resistance level 4: Maximum abrasion rating of 8000 cycles, reflecting the heavy duty nitrile coating's long service life on rough and abrasive tasks
- Cotton knit wrist closure: Keeps dust, debris, and contamination out during ground-level and waste handling tasks
- Certification: EN388:2016 rated 4111X, CE and UKCA marked
- Sizes: XL (10)
- Pack quantity: 12 pairs per pack
Polyco Matrix Heavy Duty Full Nitrile Coated Gloves
The Polyco Matrix Heavy Duty Full Nitrile Coated Gloves are designed for operatives in construction, waste management, and local authority roles where hands are regularly in contact with rough, abrasive, and contaminated materials across sustained shifts. The heavy duty nitrile coating covers the entire hand, providing complete protection against oils, hydrocarbons, and abrasive surfaces where a palm-only coated glove would leave the back of the hand exposed. The cotton interlock liner provides a more durable and comfortable internal structure than the cotton jersey used in lighter alternatives, supporting long service life under demanding daily use.
Why Choose the Polyco Matrix Heavy Duty Full Nitrile Coated Gloves
-
Maximum abrasion resistance: EN388 abrasion level 4 represents 8000 rub cycles, the highest achievable rating under the standard. For operatives handling rough aggregate, brickwork, waste materials, and abrasive surfaces daily, this reflects a coating built to outlast lighter nitrile alternatives significantly.
-
Full nitrile coating with no exposed liner: The complete nitrile coat covers fingers, knuckles, and the back of the hand. Oils, hydrocarbons, dirt, and contamination cannot reach the liner during handling tasks. Palm-only coated alternatives leave the back of the hand vulnerable in wet, oily, or contaminated environments.
-
Cotton interlock liner construction: Cotton interlock is a denser, more structured fabric than the cotton jersey used in budget alternatives. It holds its shape under sustained heavy use, maintains internal comfort, and resists the compression that causes thinner liners to pack down and lose cushioning during long shifts.
-
Heavy duty nitrile formulation: The coating is specifically formulated for heavy duty construction and waste handling rather than the lighter nitrile compounds used in dexterity or assembly gloves. It withstands sustained contact with rough surfaces, chemicals, and abrasive materials where lighter coatings crack or delaminate.
-
Cotton knit wrist closure: The knit wrist creates a secure, comfortable seal at the wrist without restriction, keeping dust, debris, and contaminated materials out of the glove during ground-level work, waste sorting, and construction site tasks.
-
Long service life: The combination of level 4 abrasion resistance and heavy duty nitrile formulation makes these gloves significantly more cost-effective per shift than lighter alternatives in high-wear construction and waste management environments.
-
CE and UKCA marked: Certified to EN388:2016 (4111X), meeting UK PPE Regulation requirements for Category II mechanical risk hand protection.
What's Included
-
12 pairs of Polyco Matrix Heavy Duty Full Nitrile Coated Gloves in size XL (10).
Specifications
| Specification | Detail |
|---|---|
| Product Name | Polyco Matrix Heavy Duty Full Nitrile Coated Gloves - Construction and Waste Management |
| Product Code | SMNFC |
| Liner | Brushed cotton interlock |
| Coating | Heavy duty nitrile, fully coated |
| Coverage | Full hand including back, fingers, and knuckles |
| EN388:2016 rating | 4111X |
| Abrasion resistance | Level 4 (8000 cycles) |
| Blade cut resistance | Level 1 |
| Tear resistance | Level 1 (10N) |
| Puncture resistance | Level 1 (20N) |
| TDM straight blade cut | Not tested (X) |
| Wrist closure | Cotton knit wrist |
| Size available | XL (10) |
| Pack quantity | 12 pairs |
| Colour | Navy blue nitrile coating, cream cotton knit wrist |
| Compliance markings | CE and UKCA |
| Suitable for | Construction, waste management, local authority, automotive, engineering, warehousing and logistics |
Compatibility
| Compatible With | Status |
|---|---|
| Rough and abrasive construction site handling | ✓ Compatible |
| Waste management and refuse handling | ✓ Compatible |
| Oil and hydrocarbon contact | ✓ Compatible |
| Local authority and grounds maintenance tasks | ✓ Compatible |
| Automotive and engineering heavy handling | ✓ Compatible |
| Warehousing and logistics handling | ✓ Compatible |
| Wet and damp handling conditions | ✓ Compatible |
| Precision or dexterity tasks | ✗ Not recommended — use SFNGPC |
| High cut-risk tasks (blades, rebar) | ✗ Not recommended |
| Chemical immersion beyond oils and hydrocarbons | ✗ Not recommended |
| Heat or flame exposure | ✗ Not recommended |
| Electrical hazard protection | ✗ Not recommended |
Who Is This For?
The Polyco Matrix Heavy Duty Full Nitrile Coated Gloves are designed for construction operatives, waste management and refuse workers, local authority maintenance teams, and industrial handlers who work with rough, abrasive, and contaminated materials daily. They are the right choice for any operative whose hands are in sustained contact with abrasive surfaces, oils, or contaminated waste where a lightweight nitrile or palm-only glove would degrade quickly and fail to provide adequate coverage.
Typical Applications
-
Heavy construction site handling including aggregate, rubble, and rough building materials
-
Waste management and refuse collection involving contaminated and abrasive materials
-
Local authority grounds maintenance and street cleaning tasks
-
Automotive and engineering heavy component handling in oily environments
-
Warehousing and logistics handling of rough, heavy, or contaminated loads
-
Drainage and utilities maintenance involving soil, debris, and hydrocarbon contact
-
General industrial handling where abrasion resistance and full hand coverage are the priority
How to Use
-
These gloves are available in XL (10) only. Check hand size before ordering to ensure correct fit.
-
Pull the glove fully over the hand and seat the cotton knit wrist cuff firmly at the wrist.
-
Check the wrist cuff sits flat and secure before starting work to prevent debris and contamination entering the glove.
-
Inspect the nitrile coating before each use. Replace when visible cracking, stiffening, or coating separation is present.
-
Do not use for tasks requiring dexterity, cut resistance above level 1, chemical immersion beyond oils and hydrocarbons, or electrical protection.
Safety
Certified to EN388:2016 (4111X) for mechanical risk protection. Abrasion resistance at level 4 reflects the maximum achievable rating under the standard. Not suitable for tasks involving sharp blades, sustained chemical immersion beyond hydrocarbons, heat, flame, or electrical hazards. For precision or dexterity tasks, a lighter nitrile palm-coated glove is more appropriate.
Maintenance
Rinse in clean water after use if contaminated and allow to air dry away from direct heat and sunlight. Store in dry conditions away from direct sunlight, in original packaging where possible. Inspect the nitrile coating and wrist cuff before each shift. Replace when the coating shows cracking, stiffening, or any signs of separation from the liner. Do not use damaged gloves.
Frequently Asked Questions
Q: What makes the cotton interlock liner different from a standard cotton liner?
A: Cotton interlock is a denser, more structured fabric than standard cotton jersey. It holds its shape under sustained heavy use, maintains internal comfort across long shifts, and resists compression better than thinner cotton liners used in budget alternatives. For operatives wearing gloves all day in construction and waste management environments, the liner quality directly affects comfort and wearing duration.
Q: What does the EN388:2016 4111X rating mean?
A: EN388 covers mechanical risk protection for gloves. The 4111X rating breaks down as: abrasion level 4 (8000 cycles), blade cut level 1, tear level 1, puncture level 1, TDM cut not tested. Abrasion level 4 is the maximum achievable under the standard and reflects a coating built for sustained contact with rough and abrasive materials in heavy duty construction and waste management environments.
Q: Why is full nitrile coating better than palm-only coating for these tasks?
A: Palm-only coated gloves leave the back of the hand as exposed fabric. In waste management and construction environments where hands contact contaminated, oily, or wet materials from all angles, exposed liner absorbs contamination and degrades quickly. Full nitrile coating seals the entire hand surface, providing consistent protection regardless of hand position or contact angle.
Q: Are these gloves suitable for waste management and refuse handling?
A: Yes. The heavy duty nitrile coating resists the abrasive, oily, and contaminated materials encountered in refuse collection and waste sorting. The cotton interlock liner maintains comfort across sustained daily use, and the cotton knit wrist closure prevents debris from entering the glove during handling tasks.
Q: Are these available in sizes other than XL (10)?
A: CMT currently stocks this glove in XL (10) only. If your team requires size L (9), please contact CMT directly to discuss availability.
Q: Are these gloves suitable for precision or assembly work?
A: No. The heavy duty nitrile coating is designed for abrasion resistance and full coverage rather than dexterity. For precision engineering and assembly tasks, the MAX Foam Nitrile Palm Coated Gloves provide a closer fit and greater tactile sensitivity.
Q: How do these compare to the Polyester Fully Coated Nitrile Double Dipped Gloves?
A: The Polyco Matrix Heavy Duty Full Nitrile Coated Gloves use a brushed cotton interlock liner with a single heavy duty nitrile coat, optimised for abrasion resistance and sustained rough handling. The Polyester Fully Coated Nitrile Double Dipped Gloves use a 13-gauge polyester liner with a double-dipped sandy nitrile construction, optimised for oil submersion, wet grip, and contact heat resistance. Choose this glove for abrasive heavy handling. Choose the EMG201 for oil and wet construction tasks.
Q: How do I order and what are the delivery options?
A: Order at cmt.co.uk. Next working day delivery for online orders placed by 7pm. VIP dedicated delivery available UK-wide, dispatched within 30 minutes. Trade accounts and bulk pricing are managed through the EDGE procurement portal with agreed pricing, role-based spending controls, and live delivery tracking.
