A fully coated thermal foam latex glove for groundworkers, concreters, and site operatives continuing heavy handling work through cold and wet conditions.
- Thermal lining: Retains hand warmth during cold-weather shifts without bulk or stiffness
- Double-dipped, fully coated: Complete latex coverage, waterproof from fingertip to cuff
- Foam latex grip surface: Secure hold on wet concrete, masonry, and cold tools
- Dual certified: EN511:2016 cold protection and EN388:2016 mechanical risk in one glove
- Certification: EN511:2016 X21, EN388:2016 3231X, CE and UKCA marked
- Sizes: L, XL, XXL (9, 10, 11)
- Pack quantity: 6 pairs per pack
MAX Thermal Foam Latex Waterproof Gloves - Cold Weather Concrete and Groundwork
A fully coated thermal foam latex glove for groundworkers, concreters, and site operatives continuing heavy handling work through cold and wet conditions.
- Thermal lining: Retains hand warmth during cold-weather shifts without bulk or stiffness
- Double-dipped, fully coated: Complete latex coverage, waterproof from fingertip to cuff
- Foam latex grip surface: Secure hold on wet concrete, masonry, and cold tools
- Dual certified: EN511:2016 cold protection and EN388:2016 mechanical risk in one glove
- Certification: EN511:2016 X21, EN388:2016 3231X, CE and UKCA marked
- Sizes: L, XL, XXL (9, 10, 11)
- Pack quantity: 6 pairs per pack
MAX Thermal Foam Latex Waterproof Gloves
The MAX Thermal Foam Latex Waterproof Gloves are built for construction sites that do not stop in winter. A thermal lining retains hand warmth during cold-weather shifts while the double-dipped fully coated latex seals out water, cement slurry, and cold mud. Certified to both EN511:2016 for cold protection and EN388:2016 for mechanical risk, these gloves cover two of the most critical winter site hazards in a single pair.
Why choose the MAX Thermal Foam Latex Waterproof Gloves
-
Dual-certified construction: Rated to EN511:2016 (X21) for cold protection and EN388:2016 (3231X) for mechanical risk. Most thermal latex gloves on the UK market carry one standard. This glove carries both, making it straightforward to specify for cold and wet construction environments.
-
Thermal lining for full-shift warmth: The lining retains heat across a full shift without adding the bulk that forces operatives to remove the glove for precise handling. Groundworkers can grip wet block and concrete reliably without losing warmth.
-
Double-dipped, fully coated latex: No exposed liner on the back of the hand. Cement slurry, cold water, and mud cannot penetrate to the lining. The fully coated construction performs the same as the non-thermal MAXWR100, with insulation added.
-
Foam latex grip surface: The foam texture maintains traction on wet concrete, cold masonry, and slippery tools where flat latex coatings lose grip in low temperatures.
-
Extended size range to XXL: Available in L, XL, and XXL (9, 10, 11), accommodating larger hands that many competitor thermal gloves do not cover.
-
Plastic-free, zero-waste packaging: Part of the CMT ThinkGreen range, supporting sites with measurable ESG and Scope 3 reporting requirements.
-
CE and UKCA marked: Both cold protection and mechanical risk standards independently verified, compliant with UK PPE Regulations for Category II hand protection.
What's included
- 6 pairs of MAX Thermal Foam Latex Waterproof Gloves in your chosen size (L, XL, or XXL), supplied in plastic-free packaging.
Specifications
| Specification | Detail |
|---|---|
| Product Name | MAX Thermal Foam Latex Waterproof Gloves - Cold Weather Concrete and Groundwork |
| Product Code | MAXTHERM100 |
| Liner | Thermal lining |
| Coating | Double-dipped foam latex, fully coated |
| Waterproof rating | Fully waterproof |
| EN388:2016 rating | 3231X |
| Abrasion resistance | Level 3 (2000 cycles) |
| Blade cut resistance | Level 2 |
| Tear resistance | Level 3 (50N) |
| Puncture resistance | Level 1 (20N) |
| TDM straight blade cut | Not tested (X) |
| Impact protection | Not tested (no marking) |
| EN511:2016 rating | X21 |
| Water resistance (EN511) | Not tested (X) |
| Convective cold | Level 2 |
| Conductive cold | Level 1 |
| Cuff type | Knitted polyester, elasticated |
| Sizes available | L (9), XL (10), XXL (11) |
| Pack quantity | 6 pairs |
| Packaging | Plastic-free, zero-waste |
| Colour | Orange body, dark grey latex coating |
| Compliance markings | CE and UKCA |
| Suitable for | Construction, groundwork, mechanical handling, cold weather site work |
Compatibility
| Compatible With | Status |
|---|---|
| Wet concrete and cement slurry | ✓ Compatible |
| Cold weather and winter site conditions | ✓ Compatible |
| Water, mud, and standing water contact | ✓ Compatible |
| Heavy material handling in cold conditions | ✓ Compatible |
| General construction site handling | ✓ Compatible |
| Chemical immersion | ✗ Not recommended |
| High cut-risk tasks (blades, sharp aggregate, rebar) | ✗ Not recommended |
| Heat or flame exposure | ✗ Not recommended |
| Operatives with latex allergy | ✗ Not recommended |
Who is this for?
The MAX Thermal Foam Latex Waterproof Gloves are designed for groundworkers, concreters, bricklayers, and general site operatives who continue heavy material handling through cold and wet conditions. They are the right choice when ambient temperature drops to the point where a standard waterproof glove no longer keeps hands warm enough for a full shift. Civil engineers and outdoor mechanical handling operatives working in exposed winter environments will also find them suitable.
Typical applications
- Placing, tamping, and finishing wet concrete during cold-weather pours
- Handling concrete blocks, kerbs, and paving slabs in winter site conditions
- Bricklaying in cold or wet weather with continuous mortar contact
- Groundwork tasks including drainage, ducting, and trench backfill in winter
- Handling shuttering and formwork panels with cold concrete residue
- General site material handling in rain, frost, or standing water
- Outdoor mechanical handling in cold or exposed environments
How to use
- Select the correct size: L for size 9, XL for size 10, XXL for size 11. A correctly fitted glove retains warmth and maintains grip. An oversized glove allows cold air in at the cuff.
- Pull the glove fully over the hand, ensuring the elasticated cuff seats firmly around the wrist with no gaps.
- Check the cuff lies flat before starting work. Any fold or gap reduces both waterproofing and thermal performance at the wrist.
- Inspect the latex coating before each use. Do not use a glove with visible cracking, peeling, or damage to the coating.
- Replace when the latex deteriorates or when the thermal lining no longer provides adequate warmth through a full shift.
Safety
Certified to EN511:2016 (X21) for cold protection and EN388:2016 (3231X) for mechanical risk. Not suitable for sharp blades, chemical immersion, heat, or flame. Operatives with a confirmed or suspected latex allergy must not use these gloves and should be issued a nitrile alternative.
Maintenance
Rinse in clean water after use and air dry away from direct heat. Heat degrades both the latex coating and the thermal lining. Store away from solvents, oils, and direct sunlight. Inspect the coating before each shift and replace when the latex cracks, peels, or loses flexibility.
Frequently Asked Questions
Q: What is the difference between this glove and the MAX Foam Latex Waterproof Gloves?
A: The MAX Thermal Foam Latex Waterproof Gloves have an internal thermal lining for cold-weather use and carry an additional EN511:2016 cold protection rating. The MAXWR100 is the right choice in warmer conditions where waterproofing is needed but thermal insulation is not.
Q: What does the EN511:2016 X21 rating mean?
A: EN511 is the UK and European standard for cold protection gloves. The three characters indicate: water resistance (X, not tested under this standard), convective cold level 2, and conductive cold level 1. CE and UKCA marking confirms independent assessment against this standard. Convective cold protection is the most relevant performance level for outdoor winter site work where wind chill and ambient temperature are the primary hazards.
Q: Why does the EN511 rating show X for water resistance if the gloves are waterproof?
A: The X means the glove was not submitted for the EN511 water resistance protocol. The waterproofing comes from the double-dipped fully coated latex construction, which falls under the EN388 standard. In practice the fully coated latex provides reliable waterproofing for site use.
Q: Are these gloves fully waterproof?
A: Yes. The double-dipped fully coated latex seals the entire hand surface. Under normal site conditions, including wet concrete, rain, and standing water, the MAX Thermal Foam Latex Waterproof Gloves are fully waterproof.
Q: Are they suitable for winter concrete and groundwork?
A: Yes. The thermal lining maintains hand warmth during cold-weather concrete pours and groundwork, while the foam latex surface grips wet block, brick, and saturated materials reliably throughout a shift.
Q: Do they fit the same as the standard waterproof version?
A: The thermal lining adds a small amount of internal volume. Sizes start at L (9) rather than M (8) and go up to XXL (11), which the MAXWR100 does not offer. Operatives who normally wear M in the standard version should size up to L in the thermal version.
Q: Can operatives with a latex allergy use these?
A: No. These gloves contain natural latex. Operatives with a confirmed or suspected latex allergy must not use them. A nitrile-coated alternative should be issued instead.
Q: Are these part of the CMT ThinkGreen range?
A: Yes. Supplied in plastic-free, zero-waste packaging as part of CMT ThinkGreen. For procurement teams reporting Scope 3 emissions or working towards net-zero targets, ThinkGreen orders contribute to measurable ESG outcomes.
Q: How do I order and what are the delivery options?
A: Order at cmt.co.uk. Next working day delivery for online orders placed by 7pm. VIP dedicated delivery is available UK-wide, dispatched within 30 minutes. Trade accounts, bulk pricing, and procurement are managed through the EDGE portal with agreed pricing, role-based approvals, and live delivery tracking.
