Kratos Olympe-S2 Retractable Fall Arrester 2m - Webbing Lanyard and Factor 2 Approved

 Specifications

Compatibility

Who Is This For?

Site operatives, maintenance engineers, scaffolders, and aerial lift operators who need a compact, lightweight retractable fall arrester for applications where the anchor point position cannot always be guaranteed to be directly overhead. Specified by safety managers where factor 2 fall scenarios are a realistic possibility, such as on cherry pickers, MEWPs, and scaffolding.

Typical Applications

• Aerial lift and cherry picker operations where the anchor may be at foot or platform level

• Scaffolding erection and maintenance requiring horizontal and vertical movement

• Facade and terrace work where the operative moves laterally across a surface

• Lattice metallic structure inspection and maintenance

• Maintenance tasks on elevated plant and equipment

• Any application where fall factor 2 exposure cannot be ruled out

How to Use

1. Inspect the device before every use. Check the casing, webbing lanyard, both connectors, and energy absorber sleeve for damage, wear, and deformation.

2. Connect the quarter turn-locking karabiner to a certified anchorage point. Confirm the gate is locked before moving away.

3. Connect the rebar hook to the dorsal D-ring of a certified full body harness. Confirm the gate is locked.

4. Allow the webbing to pay out freely as you move. The internal spring keeps the lanyard in constant tension.

5. In the event of a fall, the braking mechanism engages automatically. Do not attempt to grab the webbing during a fall.

6. After any fall arrest event, withdraw the device from service immediately. The energy absorber will have partially or fully deployed. Do not return to service without inspection by a competent person.

Safety and Maintenance

Before every use:

• Check the energy absorber sleeve is intact and the absorber has not deployed

• Verify both connectors open, close, and lock correctly

• Inspect the full webbing lanyard for cuts, abrasion, and contamination

• Confirm the device has a valid inspection record

During use:

• Always connect to a certified full body harness at the dorsal attachment point

• Never use as a work positioning or restraint device

• Do not exceed 140kg total user weight including tools and equipment

After use:

• Clean with mild soap and water if contaminated, dry naturally away from heat

• Store dry, away from UV, chemicals, and sharp objects

• Annual formal inspection by a competent person required under PUWER

• Withdraw immediately after any fall arrest event, no exceptions

Frequently Asked Questions

Q: What does fall factor 2 mean and why does it matter?

 A: Fall factor is the ratio of fall distance to available lanyard length. Factor 2 is the worst case: the anchor point is at or below the operative's harness attachment, meaning the operative can fall the full length of the lanyard before it arrests. This creates maximum fall energy. Most retractable fall arresters are rated for factor 1 or less. The Olympe-S2 is specifically approved for factor 2, which is why it is the correct choice for aerial lift and platform applications where the anchor may be at foot level.

Q: What is the difference between the Olympe-S2 and the HELIXON-S?

 A: Both are Kratos retractable fall arresters with polymer casings. The key differences are lanyard type and weight rating. The HELIXON-S uses a 4.8mm galvanised steel wire rope and is rated to 140kg vertical and horizontal with sharp edge approval. The Olympe-S2 uses a 21mm webbing lanyard, is lighter at 1.25kg, and adds fall factor 2 approval. Choose the HELIXON-S where sharp edge contact is a risk. Choose the Olympe-S2 where factor 2 scenarios are possible and weight is a priority.

Q: Why does this device use a rebar hook at the attachment end?

 A: The aluminium rebar hook FA 50 218 60 at the attachment end is designed to connect to the dorsal D-ring of a full body harness. The rebar hook profile provides secure engagement with the D-ring without the risk of accidental disconnection during normal movement. Always confirm the hook gate is fully closed and locked before moving away from the attachment point.

Q: Can this device be used on a cherry picker or MEWP?

 A: Yes. The factor 2 approval makes the Olympe-S2 specifically suitable for aerial lift and MEWP applications where the anchor point is often located at platform level, at or below the operative's harness attachment. This is precisely the fall factor 2 scenario. Always connect to the anchor point provided on the platform structure and confirm the connection before elevating.

Q: What does the removable textile sleeve on the energy absorber do?

 A: The textile sleeve protects the energy absorber webbing from abrasion, contamination, and UV degradation during normal use. It can be removed for visual inspection of the absorber condition without dismantling the device. If the absorber has partially deployed, the sleeve removal makes this immediately visible. Replace the sleeve if it becomes damaged or heavily contaminated.

Q: How does the Olympe-S2 compare to energy absorbing lanyards for the same applications?

 A: The key difference is clearance. An energy absorbing lanyard requires significant clearance below the operative for the absorber to deploy and arrest the fall, often exceeding 6m total. The Olympe-S2 arrests a fall almost instantaneously because the braking mechanism engages as the lanyard pays out rapidly. This makes it far better suited to low-rise applications and confined spaces where clearance is limited.

Q: Why order from CMT Group?

 A: CMT Group has supplied height safety PPE to UK construction sites since 2010, with a fleet of over 100 FORS Silver accredited vehicles covering 90% of the UK mainland. The Kratos Olympe-S2 is available for next working day delivery on orders placed by 7pm. VIP dedicated delivery available for urgent site requirements. CMT is a BSIF Registered Safety Supplier. Trade accounts and EDGE portal pricing available for procurement teams managing PPE across multiple projects.