Replacement oil-only absorbent refill for the 240 litre spill kit. 100 pads, 20 socks, 10 hazard waste bags. Bin not included.
Oil-only. Not for chemical or water-based spills.
- Oil-only hydrophobic absorbents for petroleum oils, diesel, and hydraulic fluid
- 100 absorbent pads
- 20 absorbent socks
- 10 hazard waste bags
- Bin not included, compatible with SK240L
- Restores full 240L oil absorbency after a spill
240 Litre Oil-Only Spill Kit Refill - Replacement Pads Socks and Waste Bags
Replacement oil-only absorbent refill for the 240 litre spill kit. 100 pads, 20 socks, 10 hazard waste bags. Bin not included.
Oil-only. Not for chemical or water-based spills.
- Oil-only hydrophobic absorbents for petroleum oils, diesel, and hydraulic fluid
- 100 absorbent pads
- 20 absorbent socks
- 10 hazard waste bags
- Bin not included, compatible with SK240L
- Restores full 240L oil absorbency after a spill
- Buy 3 for £130.09 £108.41 each and save 4%
- Buy 6 for £116.58 £97.15 each and save 14%
| BULK DISCOUNT | 3 | 6 |
|---|---|---|
| Price | £108.41 £130.09 | £97.15 £116.58 |
Order 1x to earn 113 FASTPoints
Order to earn 113 FASTPoints
Log in to access trade discounts240 Litre Oil-Only Spill Kit Refill
Replacement absorbent refill for the 240 litre oil-only wheelie bin spill kit. After any spill deployment, the absorbents and hazard bags in the SK240L are consumed and cannot be reused. This refill restores the full 240 litre oil absorbency by replacing the 100 pads, 20 socks, and 10 hazard waste bags. The bin is not included. This refill is designed for existing SK240L bin owners and any operator with a compatible 240L oil-only storage container.
This refill is oil-only. It must not be used for chemical spills, acid spills, or water-based fluid spills.
Why a 240L Site Must Restock Without Delay
Sites that specify a 240L kit do so because the credible spill volume at their highest-risk point exceeds 120 litres. A partial or complete deployment at a large plant refuelling point, bulk tank, or drum storage area can use the full 100 pads and 20 socks in a single incident. Every hour after that deployment where the bin is not restocked is an hour where the site has no oil spill response capability for a repeat incident. Keeping a spare refill in stock is the only way to guarantee continuous coverage.
Key Features
-
100 replacement absorbent pads: Restores the full pad count of the SK240L kit for high-volume oil spill response.
-
20 replacement absorbent socks: Restores the full sock count for berming larger spill perimeters before pad deployment.
-
10 replacement hazard waste bags: For correct disposal of oil-contaminated absorbents from the next incident as controlled waste.
-
Oil-only hydrophobic absorbents: Absorb petroleum oils, diesel, petrol, lubricants, and hydraulic fluids. Repel water. Not effective on chemical or water-based spills.
-
Bin not included: Refill only. Compatible with the SK240L 240 litre wheelie bin and any comparable 240L oil-only spill kit container.
Who Is This For
Trades and roles:
-
Site managers and environmental officers at large construction and civil sites
-
Plant depot and bulk fuel storage managers
-
Workshop supervisors managing large hydraulic plant
-
Facilities managers with SK240L infrastructure
Industries:
-
Construction and groundworks
-
Plant hire and maintenance
-
Engineering and manufacturing
-
Fleet and bulk transport
Specifications
| Specification | Detail |
| Product Name | 240 Litre Oil-Only Spill Kit Refill - Replacement Pads Socks and Waste Bags |
| SKU | SK240R |
| Product Type | Refill (absorbents only, bin not included) |
| Absorbency Capacity | 240 litres |
| Absorbent Type | Oil-only (hydrophobic polypropylene) |
| Suitable Liquids | Petroleum oil, diesel, petrol, lubricants, hydraulic fluid |
| Bin Included | No |
!This is a refill product. The wheelie bin is not included. To purchase the complete kit including the bin, see SK240L.ompatibility
Refil contents
| Item | Quantity and Detail |
| Absorbent pads (oil-only) | 100x |
| Absorbent socks (oil-only) | 20x |
| Hazard waste bags | 10x |
| Application or condition | Status |
| Petroleum oils and lubricants | ✓ Compatible (oil-only) |
| Diesel and derv | ✓ Compatible (oil-only) |
| Petrol and aviation fuel | ✓ Compatible (oil-only) |
| Hydraulic fluid and mineral oils | ✓ Compatible (oil-only) |
| Restocking SK240L wheelie bin after a spill | ✓ Direct replacement |
| Chemical spills (acids, alkalis, solvents) | ✗ NOT SUITABLE |
| Water-based fluids and coolants | ✗ NOT SUITABLE |
| Disposal in general waste (used absorbents) | ✗ Hazardous waste - licensed contractor required |
Who Is This For
This refill is for site managers and environmental officers who already have the SK240L 240 litre oil-only wheelie bin and need to restock after a deployment. The 240L kit is typically specified for locations where a single incident could exhaust a 120L kit — a bulk drum failure, a large excavator hydraulic rupture, or a fuel bowser connection failure. After such an incident, all 100 pads and 20 socks may be fully or partially consumed and must be replaced before the kit can respond to the next incident.
This refill is oil-only. Not for chemical or water-based spills.
Typical Applications
-
Restocking the SK240L bin after a full or partial deployment at a bulk fuel storage or plant refuelling point.
-
Keeping a spare 240L refill in stock at sites where spill frequency or volume justifies continuous coverage.
-
Supplying replacement absorbents for any compatible 240L oil-only storage bin after a diesel, hydraulic, or engine oil spill.
How to Use
Step 1: Remove all used pads, socks, and bags from the SK240L bin after the incident. Place used absorbents in the hazard waste bags and seal for licensed disposal.
Step 2: Open the SK240R refill.
Step 3: Load the 20 replacement socks into the bin first, followed by the 100 replacement pads.
Step 4: Place the 10 new hazard waste bags in the bin. Close the lid.
Step 5: Kit is ready for the next incident.
Common Mistakes
-
Not keeping a spare refill in stock: a large site that has just experienced a 240L spill deployment cannot wait for next-day delivery before the site has coverage again. Keep a refill in stock before it is needed.
-
Reusing saturated absorbents: once saturated, pads and socks are hazardous waste and must be replaced.
-
Disposing of used absorbents in general waste: illegal under the Environmental Protection Act 1990.
-
Using oil-only absorbents on chemical spills: ineffective and leaves the hazard uncontained.
Safety and Maintenance
Same obligations as SK120R apply. Used oil-contaminated absorbents are hazardous waste. Dispose via a licensed contractor. Retain waste transfer notes. Inspect the bin weekly and restock immediately after any deployment. Document every incident in the site environmental log.
Frequently Asked Questions
Q: What is the difference between SK240R and SK240L?
A: SK240L is the complete kit including the yellow wheelie bin, 100 pads, 20 socks, and 10 hazard waste bags. SK240R is the refill only — the same 100 pads, 20 socks, and 10 hazard waste bags without the bin. Order SK240R to restock an existing SK240L bin. Order SK240L if you need a new complete kit with the bin.
Q: When should I restock after a spill?
A: Immediately. A deployed 240L kit is an empty kit. Order the refill before or at the same time as dealing with waste disposal after the incident. Ideally keep a spare refill in stock permanently at 240L-kit locations so restocking is instant after any deployment.
Q: Can I reuse the pads and socks?
A: No. Saturated oil-contaminated absorbents are hazardous waste under the Environmental Protection Act 1990. They cannot be wrung out and reused. Place in the hazard waste bags and arrange licensed disposal.
Q: Does this refill fit the SK240L bin?
A: Yes. SK240R contains the same absorbent specification as the original SK240L contents and directly restocks the SK240L bin. It is also compatible with any comparable 240L oil-only spill kit container.
Q: What is this refill NOT suitable for?
A: Not suitable for chemical spills, acids, solvents, or water-based fluids. Not suitable for reuse after saturation. Used absorbents must not go in general waste.
