A PVC honeycomb anti-slip mat roll for wet rooms, shower rooms, changing rooms, and site welfare facilities, available in 0.9m and 1.2m widths with a 15m roll length.
- Honeycomb open-grid surface channels water away from the contact points, maintaining grip in wet conditions
- PVC construction, durable and compatible with standard floor cleaning agents
- 3.6mm thickness, substantial underfoot without creating a trip edge
- Cut to any length from the 15m roll with no fixed-length waste
- Available in 0.9m wide (SEMHYC09015-BLU) and 1.2m wide (SEMHYC12015-BLU)
- Dimesions:
- 3.6mm (thickness) x 90cm (width) x 15m (length)
- 3.6mm (thickness) x 120cm (width) x 15m (length)
- Colour: Blue
- Dimesions:
- Suitable for indoor wet areas, changing rooms, shower rooms, and welfare facilities
Anti-Slip Mat Roll - Blue PVC Honeycomb for Wet Rooms and Site Welfare Facilities
A PVC honeycomb anti-slip mat roll for wet rooms, shower rooms, changing rooms, and site welfare facilities, available in 0.9m and 1.2m widths with a 15m roll length.
- Honeycomb open-grid surface channels water away from the contact points, maintaining grip in wet conditions
- PVC construction, durable and compatible with standard floor cleaning agents
- 3.6mm thickness, substantial underfoot without creating a trip edge
- Cut to any length from the 15m roll with no fixed-length waste
- Available in 0.9m wide (SEMHYC09015-BLU) and 1.2m wide (SEMHYC12015-BLU)
- Dimesions:
- 3.6mm (thickness) x 90cm (width) x 15m (length)
- 3.6mm (thickness) x 120cm (width) x 15m (length)
- Colour: Blue
- Dimesions:
- Suitable for indoor wet areas, changing rooms, shower rooms, and welfare facilities
Anti-Slip Mat Roll - PVC Honeycomb
A PVC honeycomb anti-slip mat roll for wet rooms, shower rooms, changing rooms, and construction site welfare facilities where slip-resistant flooring is required in areas that are regularly wet or damp. The honeycomb surface pattern channels water away from the contact zone between mat and footwear, maintaining grip even when the floor is standing wet. Supplied as a 15m roll in two widths: 0.9m for standard shower and cubicle applications, 1.2m for communal wet areas and wider welfare room floors.
How the Honeycomb Pattern Maintains Grip in Wet Conditions
A flat PVC sheet mat traps water between the surface and the sole, reducing friction and increasing slip risk. The honeycomb pattern creates raised contact ribs across the mat face with drainage channels between them. Water passes through the open grid structure rather than pooling on the surface, keeping direct friction contact between the mat and footwear even when the floor is wet. This is why open-grid honeycomb matting is specified for wet rooms and welfare shower areas rather than flat sheet alternatives.
Key Features
-
Honeycomb anti-slip surface: Open grid channels water through the mat. Maintains grip contact between mat and footwear in standing water conditions.
-
PVC construction: Durable, water-resistant, and compatible with the standard floor cleaning agents used in welfare rooms and wet area facilities.
-
3.6mm thickness: Provides underfoot cushioning and rigidity without creating a significant trip edge at the mat perimeter.
-
15m roll length: Cut to any required length on site. Eliminates the waste of fixed-length mats that do not match floor dimensions.
-
Two widths: 0.9m for shower cubicles, cubicle corridors, and narrower wet areas. 1.2m for communal shower rooms, wider changing facilities, and welfare room wet zones.
-
Rollable format: Rolls up for storage and transport. Can be repositioned and cut further if floor coverage requirements change.
Who Is This For
Trades and roles:
-
Site managers and welfare coordinators
-
Facilities managers
-
Health and safety officers
-
Maintenance contractors
-
Property managers
Industries:
-
Construction (site welfare facilities)
-
Facilities management
-
Leisure and sports facilities
-
Social housing and managed properties
-
Commercial and industrial premises
Specifications
| Specification | Detail |
| Product Name | Anti-Slip Mat Roll - PVC Honeycomb for Wet Rooms and Site Welfare Facilities |
| Parent SKU | SEMHYC |
| Material | PVC |
| Surface Pattern | Honeycomb open-grid anti-slip |
| Thickness | 3.6mm |
| Roll Length | 15m |
| Application | Wet rooms, shower rooms, changing rooms, site welfare facilities |
| Colour | Blue |
Variant comparison
| Specification | SEMHYC09015-BLU0.9m wide | SEMHYC12015-BLU1.2m wide |
| SKU | SEMHYC09015-BLU | SEMHYC12015-BLU |
| Width | 0.9m (90cm) | 1.2m (120cm) |
| Thickness | 3.6mm | 3.6mm |
| Roll Length | 15m | 15m |
| Coverage per roll | 13.5m² | 18m² |
| Best for | Shower cubicles, narrow corridors, single-row wet walkways | Communal shower rooms, wider changing facilities, welfare room wet zones |
Compatibility
| Application or condition | Status |
| Indoor wet rooms and shower rooms | ✓ Compatible |
| Changing rooms and locker areas | ✓ Compatible |
| Site welfare room shower and wet areas | ✓ Compatible |
| Commercial and leisure facility wet zones | ✓ Compatible |
| Cutting to length with knife or scissors | ✓ Compatible |
| Standard floor cleaning agents | ✓ Compatible |
| Outdoor or UV-exposed environments | ✗ Not confirmed (confirm before specifying) |
| Heavily uneven floor surfaces | ✗ Not recommended (mat will not lie flat) |
| Overlapping sections | ✗ Not suitable (creates trip edge) |
| Solvent or bleach-based cleaners | ✗ Not recommended (may degrade PVC) |
Who Is This For
This PVC honeycomb anti-slip mat roll is for site managers, facilities managers, and welfare coordinators specifying slip-resistant flooring for wet areas on construction sites, commercial premises, and managed facilities. The 15m roll length and two width options allow the mat to be cut to fit any shower room, wet room, or changing room floor without significant waste. The construction site welfare room application places this firmly in CMT's core trade supply scope alongside janitorial and welfare room equipment.
Typical Applications
-
Shower room and wet room floors in construction site welfare facilities where operatives move through in wet footwear.
-
Changing room floors in sports facilities, leisure centres, and managed workplaces.
-
Shower cubicle bases and communal wet area floors in social housing and managed residential properties.
-
Wet area walkways in commercial kitchens, food processing facilities, and industrial wet environments.
-
Pool surrounds, spa changing areas, and leisure facility wet zones.
-
Any indoor wet or persistently damp floor area where slip prevention is a health and safety requirement.
How to Use
Step 1: Measure the floor area to be covered. Select the 0.9m or 1.2m width. For areas wider than a single roll, position two lengths edge to edge without overlap.
Step 2: Unroll the mat across the floor and mark the required length.
Step 3: Cut to length with a sharp knife or heavy scissors. The PVC material cuts cleanly at any point along the roll.
Step 4: Position the mat flat on the floor with the honeycomb surface facing upward. No adhesive is required for most applications.
Step 5: For a permanent installation where the mat must not be repositioned, use a PVC-compatible floor adhesive rated for wet area use. Follow the adhesive manufacturer's guidance.
Step 6: Clean the mat regularly. Lift periodically to clean the floor surface beneath.
Common Mistakes
-
Overlapping mat sections: never overlap sections. An overlap creates a raised edge that is a trip hazard. Butt sections together edge to edge at the same level.
-
Fitting over an uneven or undulating floor: the mat must lie flat. Over a significantly uneven surface, the mat edges will lift, creating both a trip hazard and a reduction in anti-slip grip at the edge.
-
Allowing the edges to curl: a tightly rolled mat may curl when first laid. Allow it to relax flat before fitting, or weight the edges temporarily until it settles.
-
Leaving debris under the mat: the underside of the mat and the floor beneath should be cleaned regularly. Accumulated debris under the mat creates hygiene risks and reduces the mat's stability on the floor.
Safety and Maintenance
Clean the mat regularly with warm water and a standard floor cleaning agent. Do not use solvents or bleach-based cleaners which may degrade the PVC material. Lift the mat periodically to clean the floor surface beneath and inspect for debris. Inspect the mat at regular intervals for damage, curled or lifted edges, or sections that have moved from their position. A lifted or curled anti-slip mat is a trip hazard and must be refitted or replaced promptly. Do not use outdoors unless confirmed suitable for UV exposure.
Frequently Asked Questions
Q: What is the difference between the 0.9m and 1.2m variants?
A: Width only. Both are 3.6mm thick and 15m long. The 0.9m wide roll (SEMHYC09015-BLU) covers 13.5m² per roll and suits standard shower cubicles, narrow changing corridors, and single-row walkways. The 1.2m wide roll (SEMHYC12015-BLU) covers 18m² per roll for communal shower areas, wider changing room floors, and welfare room wet zones where greater width per roll reduces the number of joins.
Q: How does the honeycomb pattern improve grip compared with a flat PVC mat?
A: A flat PVC sheet traps water between the mat surface and the sole of the foot, creating a water film that reduces friction and increases slip risk. The honeycomb pattern creates raised contact ribs across the mat face with drainage channels between them. Water passes through the open grid structure rather than pooling on the surface, keeping direct friction contact between the mat and footwear even in standing water conditions.
Q: Can the mat be cut to size on site?
A: Yes. The PVC material cuts cleanly with a sharp knife or heavy scissors at any point along the roll. Cut the required length from the 15m roll and store the remainder rolled for future use. This makes the roll format more economical than fixed-length mats for covering varied floor areas across a site or multiple welfare rooms.
Q: Does the mat need adhesive fixing?
A: Not for most applications. The mat sits on the floor under its own weight in standard wet room and changing room applications. For a permanent installation where the mat must not be repositioned, use a PVC-compatible floor adhesive rated for wet area use. Confirm adhesive compatibility before applying.
Q: Can this mat be used outdoors?
A: The mat is confirmed for indoor wet area use. Confirm suitability for outdoor or UV-exposed applications with CMT before specifying, as prolonged outdoor sun exposure may degrade standard PVC matting.
Q: How often should the mat be cleaned and inspected?
A: Clean with warm water and a standard floor cleaning agent as often as the traffic level and use conditions require. In a busy welfare room shower area, daily cleaning is advisable. Lift the mat periodically (weekly in high-use settings) to clean the floor beneath and inspect the mat underside for wear or damage.
Q: What happens if the mat starts to lift or curl at the edges?
A: A lifted or curled edge creates a trip hazard. Refit the mat flat against the floor. If the mat repeatedly lifts in the same area, consider adhesive fixing at the perimeter, or replace the section if the mat has deformed permanently.
