Concrete diamond blade developed for professional contractors cutting reinforced, hard unabrasive, and general concrete materials on UK construction and infrastructure sites.
• Designed for reinforced and hard unabrasive concrete cutting
• Suitable for multi-purpose concrete site applications
• 15mm segment height
• Available in 115x22mm, 125x22mm, and 300x20mm sizes
• EN13236 compliant
Concrete Diamond Blade – Super Premium – 15mm Segment – OTEC DT15
Concrete diamond blade developed for professional contractors cutting reinforced, hard unabrasive, and general concrete materials on UK construction and infrastructure sites.
• Designed for reinforced and hard unabrasive concrete cutting
• Suitable for multi-purpose concrete site applications
• 15mm segment height
• Available in 115x22mm, 125x22mm, and 300x20mm sizes
• EN13236 compliant
The OTEC DT15 is a super premium concrete diamond blade developed for professional use on UK construction, infrastructure, and civil engineering sites. It is designed to cut a wide range of concrete materials where strength, density, and reinforcement place higher demands on blade performance.
This blade is intended for contractors, groundworks teams, and site operatives working with reinforced concrete, hard unabrasive concrete products, and general concrete applications such as slabs, kerbs, and pavers. Its design supports consistent cutting behaviour across mixed site conditions, reducing the need for frequent blade changes.
The DT15 is not suitable for metal cutting or asphalt-based materials. It should not be specified for exposed steel, rebar, asphalt, green concrete, render, or cement screed, and should only be used within its intended concrete-focused application range.
✓ Engineered to deliver stable cutting performance across reinforced and dense concrete materials
✓ Supports controlled wear behaviour when cutting hard and general concrete products
✓ Suitable for varied site tasks where material consistency may chang
✓ Designed to maintain cutting efficiency under regular professional use
✓ Balanced segment configuration supports predictable blade behaviour on site
✓ Helps reduce unnecessary blade changes on mixed concrete applications
✓ Developed to perform reliably on UK construction and infrastructure sites
Specifications Table
| Specification | Details |
|---|---|
| Product Name | Concrete Diamond Blade – Super Premium – 15mm Segment – OTEC DT15 |
| Product Code | DT15 |
| Segment Height | 15mm |
| Segment Type | Segmented |
| Primary Application | Concrete |
| Secondary Application | General purpose concrete |
| Suitable Materials | Reinforced concrete, hard unabrasive concrete, general concrete products |
| Not Suitable For | Metal, asphalt-based materials |
| Safety Standard | EN13236 |
| Use Environment | UK construction, infrastructure, and civil engineering sites |
Variations Table
| Diameter | Bore | Max RPM | Variation Code |
|---|---|---|---|
| 115mm | 22mm | 13200 rpm | DT15-115/22 |
| 125mm | 22mm | 12250 rpm | DT15-125/22 |
| 300mm | 20mm | 6400 rpm | DT15-300/20 |
OTEC DT15 is suitable for:
-
Reinforced concrete structures
-
Hard unabrasive concrete products
-
Limestone and flint aggregate concrete
-
Kerbs, slabs, and concrete pavers
-
Abrasive concrete products such as roof tiles
Material Suitability Table – OTEC DT15
| Material Category | Typical Materials Included | Suitability |
|---|---|---|
| Metal | Exposed steel, RSJs, sheet metal, ductile iron pipe, rebar, fibreglass, plastic pipe | ❌ Not suitable |
| Very Hard | Granite, engineering bricks, hard clay products, hard natural stone, very hard concrete | ✔ Suitable |
| Concrete | Limestone and flint aggregate, reinforced concrete, hard unabrasive concrete products | ✔✔✔ Highly suitable |
| General Purpose | Kerbs and slabs, medium hard bricks, yorkstone, concrete paviors | ✔✔✔ Highly suitable |
| Abrasive | Concrete roof tiles, sandstone, abrasive concrete paviors | ✔✔ Suitable |
| Asphalt | Asphalt, green concrete, render, cement screed, lignacite blocks | ❌ Not suitable |
Before use
Confirm that the blade specification is suitable for the material being cut. Inspect the blade for cracking, segment damage, uneven wear, or undercutting of the steel core. Ensure the rotation direction matches the arrow on the blade and that the bore size matches the machine spindle. Verify that machine guards are correctly fitted and appropriate PPE is worn.
During use
Do not apply excessive force during cutting. Allow the blade to cut at its designed speed and maintain steady feed pressure. Take regular cooling breaks, particularly when cutting dense or reinforced concrete. If cutting performance reduces, reassess material suitability and blade condition.
Wet cutting
Where wet cutting is used, ensure a continuous and adequate water supply is applied to both sides of the blade throughout operation.
Is the DT15 suitable for reinforced concrete?
Yes. The DT15 is designed for reinforced and hard unabrasive concrete materials.
Can this blade be used for general site concrete cutting?
Yes. It is suitable for general purpose concrete applications such as slabs, kerbs, and pavers.
Is the DT15 suitable for asphalt cutting?
No. The DT15 is not designed for asphalt, green concrete, render, or cement screed.
Can this blade be used to cut metal or rebar?
No. It must not be used for exposed steel, rebar, RSJs, or any metal materials.
Is the blade compliant with UK site safety requirements?
Yes. It is manufactured in accordance with EN13236, the recognised safety standard for diamond blades in the UK.
Don't think this is the right blade for you? No worries, we have the blade you're looking for!
Please use the chart below to find the perfect blade for you - simply put the Blade Ref in the search bar and add it to your order!
