Skytec Neon Cotton Nitrile Coated Gloves - Construction and Maintenance

Skytec Neon Cotton Nitrile Coated Gloves

The Skytec Neon is a multi-purpose work glove built for tasks where grip, comfort, and hand visibility matter in equal measure. A cotton interlock liner provides warmth and comfort during extended wear, whilst the 3/4 nitrile coating covers the palm, knuckles, and finger backs with a durable, oil-resistant layer that performs in damp conditions and against detergents and alcohols. The bright yellow coating is a deliberate safety feature: in poorly-lit environments, drain clearance, highway maintenance, and public works, hand visibility is as important as hand protection. The Neon carries CE Cat II certification to EN 388:2016 + A1:2018 with a score of 4111X, confirming Level 4 abrasion resistance as its primary mechanical protection rating.

Why choose the Skytec Neon Cotton Nitrile Coated Gloves

• 3/4 nitrile coating for fuller coverage: The coating extends from the palm across the knuckles to the finger backs, providing more protection against dirt, moisture, and abrasion than a palm-only coated glove in the same task category.

• High-visibility yellow for poorly-lit environments: The bright yellow nitrile is a functional safety feature for drain clearance, highway maintenance, underground work, and any task where hand visibility reduces risk.

• Antibacterial treatment reduces odours: An active antibacterial treatment is built into the glove construction, keeping odours controlled during dirty, high-contact tasks and extending practical wear life between replacements.

• Cotton liner for all-day comfort: Cotton provides better temperature regulation and skin comfort than polyester liners, reducing hand fatigue during long shifts.

• Level 4 abrasion resistance: EN 388 abrasion score of 4 out of 4 confirms the nitrile coating withstands sustained rubbing and surface contact at the highest rating within the standard.

• Knitted wrist for a secure, debris-free fit: The elasticated knit cuff seats the glove firmly at the wrist, preventing soil, grit, and moisture from entering during dirty tasks.

• Supplied in packs of 10 pairs: Practical pack format for site stores, procurement teams, and welfare cabin distribution.

What's included

10 x pairs of Skytec Neon Cotton Nitrile Coated Gloves.

 Specifications

Compatibility

Who is this for?

The Skytec Neon is specified by site managers, facilities managers, procurement teams, and health and safety officers supplying gloves for general handling, maintenance, and dirty-task work across construction, utilities, facilities management, and public works. It suits any operative who needs basic mechanical protection, grip in damp conditions, and reliable hand visibility during tasks in poorly-lit or outdoor environments. The cotton liner makes it particularly practical for operatives wearing gloves for full shift durations in moderate-temperature conditions.

Typical applications

• General material handling on construction and civils sites where grip and abrasion resistance are the primary requirements

• Drain clearance and repair work where hand protection against moisture, detergents, and contaminated surfaces is needed

• Highway repairs and maintenance, particularly in conditions where hand visibility improves operative safety near traffic

• Commercial cleaning and facilities management tasks involving detergents, alcohols, and general surface contact

• Paper and card handling in logistics, warehousing, and distribution environments

• Public works and utilities maintenance involving general groundwork and outdoor manual tasks

• General maintenance across manufacturing and industrial facilities

How to use

1. Select the correct glove size by measuring palm circumference. (Size 10 corresponds to a palm circumference of 254 mm and hand length of approximately 204 mm).

2. Inspect the glove before each use. Check for holes, cracks, tears, or colour changes. Discard any glove showing these defects.

3. Don the glove by easing each finger into position. Ensure the knitted wrist cuff seats securely at the wrist without bunching.

4. Use the glove only for its intended application: general handling, maintenance, and dirty tasks in moderate-risk environments. This glove is not rated for heat, cut level beyond Level 1, thermal hazards, electrical hazards, or chemical protection.

5. Avoid use near moving machinery where there is a risk of entanglement.

6. Remove gloves promptly when damage or wear is identified. Where the glove is contaminated with a substance presenting a hazard, ease the left and right gloves off alternately using the gloved hand so that contaminants do not contact the skin.

7. Wash hands thoroughly before donning and after removing gloves.

Safety

• CE Cat II, EN 388:2016 + A1:2018, score 4111X. This glove provides mechanical protection against abrasion at Level 4. Cut, tear, and puncture resistance are rated at Level 1 and the glove is not suitable for tasks requiring higher cut or puncture protection.

• Not suitable for heat, thermal, electrical, or chemical protection. Confirm suitability against the specific risk assessment for each application before issuing.

• Do not use near moving machinery due to entanglement hazard from the knitted liner and cuff.

• If a skin reaction occurs during use, remove the glove immediately and seek medical advice.

• Tactile sensitivity and dexterity reduce with a poorly-fitting glove. Always issue the correct size.

Maintenance

Wipe clean with a damp cloth. Do not machine wash. Note that the performance characteristics of worn and laundered gloves may differ from the certified test results. Inspect gloves before each use and discard any showing holes, cracks, tears, stiffening, or significant colour change. Store in dry conditions between 10°C and 30°C in original packaging, away from direct sunlight. Do not exceed 40°C in storage. When stored as recommended, mechanical properties are maintained for up to three years from the date of manufacture.

Frequently Asked Questions

Q: What does the 3/4 nitrile coating mean and why does it matter for dirty tasks?

 A: A 3/4 coating covers the palm, knuckles, and the back of the fingers, leaving only the upper back of the hand uncoated. For dirty, wet, or contaminated tasks, this provides more coverage than a palm-only coat, protecting the areas most likely to contact surfaces, drainage channels, or contaminated materials during manual work.

Q: Why is the Skytec Neon yellow rather than a standard colour?

 A: The bright yellow nitrile coating is a deliberate safety feature, not a cosmetic choice. In poorly-lit environments such as drainage work, underground maintenance, and highway repairs near traffic, yellow-coated hands are significantly more visible than standard blue, grey, or black alternatives. This is the same principle as hi-vis outerwear applied at glove level.

Q: What does EN 388:2016 + A1:2018 score 4111X mean in plain language?

 A: EN 388 is the European standard for gloves providing protection against mechanical risks. The score 4111X breaks down as follows: abrasion resistance Level 4 out of 4 (the maximum), cut resistance Level 1 out of 5, tear resistance Level 1 out of 4, puncture resistance Level 1 out of 4, and X indicating the TDM blade cut test was not applicable. The score confirms the Neon's primary protection is abrasion resistance, which is appropriate for general handling, dirty tasks, and maintenance work.

Q: What is CE Cat II and what does it mean for a PPE risk assessment?

 A: Category II covers PPE designed to protect against intermediate risks that are not minor (Cat I) and not irreversible or life-threatening (Cat III). For a site risk assessment, specifying a Cat II certified glove for general handling and maintenance tasks confirms the glove has been independently assessed and certified by a notified body, providing a defensible audit trail for PPE compliance.

Q: Is this glove suitable for chemical protection?

 A: No. The Skytec Neon provides basic resistance to damp conditions, detergents, and alcohols as part of its general-purpose construction, but it is not tested or certified for chemical protection under EN ISO 374. If chemical exposure is identified in a risk assessment, a glove with specific chemical resistance certification is required.

Q: What is the antibacterial treatment and how long does it last?

 A: The antibacterial treatment is built into the glove construction to reduce odour-causing bacteria during use. This is particularly relevant for dirty tasks involving drain clearance, waste handling, and cleaning where gloves are worn for extended periods. The treatment is integral to the product and does not require activation or reapplication.

Q: Can the Skytec Neon be washed and reused?

 A: The glove can be wiped clean with a damp cloth between uses. Machine washing is not recommended as it may alter the mechanical performance characteristics of the nitrile coating. Inspect before each reuse and discard if any damage, stiffening, or deterioration is present.

Q: How do I select the right size?

 A: Measure your palm circumference at its widest point. Size 10 (XL) corresponds to a palm circumference of 254 mm and a hand length of approximately 204 mm. The Skytec Neon is available in sizes 7 (S) through 10 (XL). Always issue the correct size: an oversized glove reduces tactile sensitivity and dexterity, increasing hand fatigue and reducing protection effectiveness.

Q: Why order  nitrile coated gloves through CMT Group?

 A: CMT Group is a BSIF Registered Safety Supplier and holds ISO 9001:2015, CHAS Elite, and SSIP accreditations, meaning PPE products supplied by CMT are sourced through a verified, compliant supply chain. Most products have same or next day delivery, so orders placed by 7pm online are despatched for next working day UK mainland delivery. Packs of 10 pairs are available for single-site orders. Volume pricing is available through CMT's EDGE procurement portal.