110V halogen site floodlight delivering approximately 8,400lm from a 400W lamp, for indoor and outdoor construction site use on a portable steel floor stand.
- 400W tungsten halogen lamp, approx. 8,400lm output
- Approx. 2,000-hour lamp life
- Tiltable lamp head, adjusts up or down
- Protective metal grille and tempered glass lens
- Rubber-coated carry handle for comfortable transportation
- 2-metre heavy duty cable with 16A industrial plug
- Suitable for indoor and outdoor use
- UK-made, steel floor stand
Defender 110V Halogen Site Floodlight - 400W 8,400lm Floor Stand
110V halogen site floodlight delivering approximately 8,400lm from a 400W lamp, for indoor and outdoor construction site use on a portable steel floor stand.
- 400W tungsten halogen lamp, approx. 8,400lm output
- Approx. 2,000-hour lamp life
- Tiltable lamp head, adjusts up or down
- Protective metal grille and tempered glass lens
- Rubber-coated carry handle for comfortable transportation
- 2-metre heavy duty cable with 16A industrial plug
- Suitable for indoor and outdoor use
- UK-made, steel floor stand
Order 1x to earn 31 FASTPoints
Order to earn 31 FASTPoints
Log in to access trade discountsDefender 110V Halogen Site Floodlight - 400W
Defender 110V halogen site floodlight for construction sites, temporary works, and general indoor and outdoor applications requiring high-output portable illumination from a 110V site supply. The 400W lamp is fitted and ready to use on arrival, mounted on a portable steel floor stand with a tiltable head, giving immediate full-brightness output at any angle from the moment it is switched on. A rubber-coated carry handle, protective metal grille, and tempered glass lens round out a robust, field-proven design that has been a standard on UK construction sites for years.
How a tilting head and portable stand work together on site
A fixed-angle work light positioned on a floor stand leaves the operative repositioning the unit every time the task moves. On a construction site where work progresses through a space, a light that can't follow the task quickly becomes an obstacle rather than a tool. The tiltable head on this floodlight adjusts up or down to direct 8,400lm at the exact angle required without moving the stand. When the work does move to a different area, the rubber-coated carry handle makes repositioning quick and comfortable.
Key Features
-
400W halogen lamp, approx. 8,400lm: High-output illumination from a proven lamp type. Full brightness from the moment the switch is thrown, with no warm-up period required.
-
Tiltable lamp head: The head tilts up and down to direct light at the required angle without repositioning the stand. Covers a wide range of orientations from a single position.
-
Protective metal grille: Guards the lamp from accidental contact and impact during use. Must remain in place during operation.
-
Tempered glass lens: Resists cracking and shattering under the heat and mechanical stresses of site use.
-
Rubber-coated carry handle: Provides a secure, comfortable grip for transporting the floodlight across the site. The rubber coating reduces hand fatigue and improves grip in wet conditions.
-
Steel floor stand: Stable base that holds the floodlight in position across a range of floor surfaces. Compatible with floor-level and raised working positions.
-
2-metre heavy duty cable with 16A plug: Ready to connect to any standard 110V site supply. Heavy duty PVC sheathing rated for site conditions.
-
UK-made: Defender is a UK-manufactured product, confirmed by the country of origin declaration.
Who is this for
Trades and roles:
-
Site electricians
-
Groundworkers and civils operatives
-
General site operatives
-
Plant and maintenance engineers
-
Site managers
Industries:
-
Construction and groundworks
-
Civil engineering and utilities
-
Industrial maintenance
-
General trade and site operations
Specifications
| Specification | Detail |
| Product Name | Defender 110V Halogen Site Floodlight – 400W 8,400lm Floor Stand |
| SKU | ELHLF01 |
| Brand | Defender |
| Lamp Type | Tungsten halogen |
| Voltage | 110V AC |
| Wattage | 400W |
| Luminous Flux | Approx. 8,400lm |
| Lamp Life | Approx. 2,000 hours |
| Cable | 2 metres, heavy duty PVC |
| Plug | 16A industrial (110V), fitted |
| Stand | Steel floor stand |
| Head Adjustment | Tiltable up and down |
| Handle | Rubber-coated carry handle |
| Lens | Tempered glass |
| Guard | Protective metal grille |
| Suitable For | Indoor and outdoor use |
| Country of Origin | United Kingdom |
Compatibility
| Application or condition | Status |
| 110V AC site supply | ✓ Suitable – 110V AC, 16A industrial plug fitted |
| Indoor construction and site use | ✓ Suitable |
| Outdoor site use in covered or sheltered conditions | ✓ Suitable – rated for outdoor use |
| Portable repositioning during the shift | ✓ Suitable – rubber-coated carry handle and steel floor stand |
| Angle adjustment without repositioning the stand | ✓ Suitable – tiltable head adjusts up and down |
| Use without the protective metal grille in place | ✗ Not recommended – grille must be in place during operation |
| Positioning near flammable materials | ✗ Not suitable – halogen lamps generate significant heat during operation |
| Use in very wet conditions, heavy rain, or water immersion | ✗ Not confirmed – no IP rating stated, avoid exposure to sustained water |
| Use face-down or with the lamp pointing directly downward | ✗ Not recommended – risk of fire and explosion from halogen lamp in incorrect orientation |
Who is this for
Site operatives, electricians, and groundworkers who need portable, high-output area lighting from a 110V site supply without additional equipment. The Defender halogen site floodlight is a direct-connect, ready-to-use work light for sites with an established 110V infrastructure, and for any situation where a proven, simple, high-output floodlight on a floor stand is the right tool.
Typical applications
-
Area lighting during first and second fix electrical and trades work on construction sites.
-
Groundwork and drainage operations during early starts and winter hours when daylight is insufficient.
-
Industrial maintenance and plant room lighting where a portable, high-output work light is needed without permanent installation.
-
General outdoor site compound and access route lighting during reduced daylight operations.
-
Any site task requiring immediate full-brightness illumination from a portable 110V floor-mounted floodlight.
How to use
Step 1: Place the floodlight on a stable, level surface. Confirm the steel floor stand is fully engaged and the floodlight is secure before connecting to power.
Step 2: Confirm the protective metal grille is in place over the lamp. Do not use without the grille fitted.
Step 3: Adjust the lamp head by tilting it up or down to the required angle for the task.
Step 4: Connect the 16A industrial plug to a 110V site supply. Switch on and confirm correct operation.
Step 5: Keep the cable clear of foot traffic and ensure it is not a trip hazard. The 2-metre cable may require a 110V extension lead if the power source is more than 2 metres from the intended light position.
Step 6: Allow the lamp to cool fully before handling, storing, or transporting the unit after use.
Common mistakes
-
Handling the unit immediately after switching off: halogen lamps and the surrounding housing remain extremely hot for several minutes after switch-off. Always allow to cool fully before moving, storing, or changing the lamp position.
-
Removing the protective grille during use: the grille must be in place at all times when the floodlight is operational. The lamp reaches very high temperatures and presents a fire and burn risk if unguarded.
-
Positioning near flammable materials: the lamp generates significant heat. Maintain adequate clearance from timber, plastics, fabric, and any combustible material during operation.
-
Using without checking for water exposure: no IP rating is confirmed for this product. Avoid sustained water exposure and do not use in conditions where water could reach the lamp, housing, or cable connections.
Safety
Halogen lamps reach very high operating temperatures. Never touch the lamp surface or housing during or immediately after operation. Always allow the lamp to cool before handling. The protective metal grille must be in place before switching on. Keep the floodlight at least 0.5 metres from all combustible materials during operation. Do not use in explosive or flammable atmospheres. Never point the lamp directly downward as halogen lamps are not designed to operate in this orientation and may fail or cause fire. Connect only to 110V AC supply.
Maintenance
Allow the unit to cool fully before any maintenance. Clean the grille and housing with a dry cloth. Inspect the cable, plug, and housing for damage before each use. Do not use if the cable or plug is damaged. Replace the lamp when the rated life is reached or when the lamp fails. Replacement lamps should be the correct 400W type for this fitting. Contact CMT Group sales for the correct replacement lamp specification before purchasing.
Frequently Asked Questions
Q: Does this floodlight come with the lamp already fitted?
A: Yes. The Defender halogen site floodlight is supplied with the 400W halogen lamp fitted and ready to use. The unit is complete on arrival and requires only connection to a 110V supply to operate.
Q: How long does the lamp last and can it be replaced?
A: The 400W halogen lamp has an approximate rated life of 2,000 hours. When the lamp reaches end of life, it can be replaced. Contact the CMT Group sales team for the correct replacement lamp specification before purchasing. Always allow the unit to cool fully and disconnect from the power supply before replacing the lamp.
Q: What is this floodlight NOT suitable for?
A: No IP rating is confirmed for this product. Avoid sustained water exposure and do not use in very wet outdoor conditions or near water sources. The floodlight must not be positioned within close proximity of flammable or combustible materials due to the high heat output of the halogen lamp. The lamp must not be operated facing directly downward. Do not use on 240V mains supply — this is a 110V product only.
Q: Why does the lamp need to cool before handling?
A: Halogen lamps reach very high operating temperatures during use and retain heat for several minutes after being switched off. The lamp surface, glass lens, and surrounding housing remain hot enough to cause burns. Always wait until the unit has cooled to ambient temperature before moving, storing, or performing any maintenance on the lamp.
Q: How does the tilt adjustment work?
A: The lamp head pivots on its mounting to tilt upward or downward. This allows the beam to be directed at the required area without repositioning the floor stand. The adjustment is made by hand before use. Confirm the head is in the required position before switching on.
