MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 14 TPI - Effi-Sharp Precision Metal Cutting

MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 14 TPI - Effi-Sharp Precision Metal Cutting

The MAXTEC Effi-Sharp Bi-Metal Reciprocating Saw Blade is a 228mm 14 TPI precision metal cutting blade engineered for fast, controlled cutting of thick steel, pipe, channel sections, and structural metal on standard reciprocating saws. The Effi-Sharp tooth design uses an optimised tooth geometry that enters the material more efficiently than a standard bi-metal tooth profile, reducing the force required per stroke and delivering faster cutting rates on thick metal sections without sacrificing cut edge quality. At 14 TPI, the balanced cutting profile sits between the fine 18 TPI specification for thin sheet metal and the coarser 10 TPI for mixed material work, making it the correct choice for thick steel pipe, channel, and structural sections where both cutting speed and a usable cut edge are required. For plumbers, heating engineers, mechanical contractors, and structural trades who regularly cut thick steel sections on site, this blade is built around the demands of sustained professional metal cutting.

Why Choose the MAXTEC Effi-Sharp Bi-Metal Reciprocating Saw Blade 228mm 14 TPI

• Effi-Sharp tooth geometry: optimised tooth profile enters metal more efficiently per stroke, delivering faster cutting rates on thick steel than a standard 14 TPI bi-metal blade.

• 14 TPI balanced cutting profile: aggressive enough for thick steel pipe and channel sections, controlled enough to produce a usable cut edge without excessive burring.

• Bi-metal construction: flexible alloy steel body resists breakage under the lateral forces of thick metal cutting whilst hardened HSS tooth tips maintain cutting aggression across repeated cuts.

• 228mm length with 206mm working length: sufficient reach for cutting thick-walled pipe and structural channel in moderately confined access conditions.

• Suitable for thick steel, pipe, and channel: covers the full range of heavy metal cutting tasks on plumbing, heating, mechanical, and structural installations.

• Pack of five: trade quantity suited to professional consumption rates on sustained metal cutting work.

What's Included

• 5 x MAXTEC Effi-Sharp Bi-Metal Reciprocating Saw Blade, 228mm, 14 TPI

 Specifications

Compatibility

Who Is This For?

The MAXTEC Effi-Sharp Bi-Metal Reciprocating Saw Blade 228mm 14 TPI is aimed at plumbers, heating engineers, mechanical contractors, and structural trades who regularly cut thick steel pipe, channel sections, and structural metal on site. It suits the heating engineer cutting thick-walled steel boiler connections and flow and return pipework, the mechanical contractor cutting steel channel and structural sections during installation and adaptation work, and the plumber cutting large diameter steel pipe in moderately confined access conditions.

Typical Applications

• Cutting thick-walled steel pipe and tube during plumbing and heating installations

• Cutting steel channel and structural sections during mechanical and structural installations

• Cutting large diameter steel pipe fittings and connectors during commercial plumbing work

• Cutting mild and high-grade steel sections during structural adaptation and refurbishment

• Cutting non-ferrous metal sections during HVAC and mechanical installations

• Cutting steel boiler connections and pipework during heating system installations

• Cutting steel cable management systems and containment during electrical distribution work

How to Use

1. Fit the blade into the reciprocating saw blade clamp using the universal shank and confirm it is fully locked before operating.

2. Allow the saw to reach full speed before contacting the workpiece.

3. Apply steady forward pressure and allow the Effi-Sharp tooth geometry to work through the material without forcing.

4. Apply light cutting lubricant on thick-walled pipe and heavy steel sections to reduce heat build-up and extend blade life.

5. Reduce stroke rate on very thick sections to maintain tooth engagement and prevent blade overheating.

6. Inspect the blade after each use and replace when teeth show visible wear or cutting performance deteriorates.

Safety

• Eye protection to EN 166 is mandatory for all reciprocating saw operations.

• Wear cut-resistant gloves to EN 388 when handling and changing blades.

• Secure the workpiece firmly before cutting to prevent movement on breakthrough.

• Always locate concealed services before cutting through walls or ceilings.

• Apply cutting lubricant when cutting thick steel to reduce heat and blade wear.

Maintenance

• Inspect blades before each use for cracked, chipped, or missing teeth.

• Clean metal swarf from the blade after each use before storage.

• Store blades flat in a dry environment to prevent corrosion of the tooth edge.

• Replace blades when cutting performance deteriorates rather than forcing a worn blade.

Frequently Asked Questions

Q: What is Effi-Sharp tooth design?

 A: Effi-Sharp is MAXTEC's proprietary tooth geometry that optimises the angle and profile of each tooth for more efficient entry into metal per stroke. In practice this delivers faster cutting rates on thick steel and pipe compared to a standard 14 TPI bi-metal tooth profile.

Q: What is the difference between this blade and the MAXTEC 18 TPI metal cutting blade?

 A: The MX-1122BF runs at 14 TPI and is designed for thick steel pipe, channel, and structural sections where a more aggressive tooth pitch is needed for productive cutting. The 18 TPI blade is designed for thinner metal sections including conduit and sheet steel where a finer tooth pitch produces a cleaner cut edge with less burring.

Q: What materials can this blade cut?

 A: The MX-1122BF cuts thick steel pipe and tube, steel channel and structural sections, mild and high-grade steel, non-ferrous metals, and steel fittings and connectors. It is not designed for timber, thin sheet metal under 1.5mm, or masonry.

Q: Will this blade fit my reciprocating saw?

 A: Yes. The MX-1122BF uses a universal shank compatible with all major reciprocating saw brands including Bosch, DeWalt, Milwaukee, Makita, Metabo, and Fein.

Q: Should I use cutting lubricant with this blade?

 A: Yes on thick-walled steel pipe and heavy structural sections. Cutting lubricant reduces heat build-up at the tooth tips during sustained cutting on thick metal, extending blade life and maintaining cutting performance across more cuts per blade.

Q: Why should I order from CMT Group?

A: CMT Group has supplied UK construction sites since 2010 with next working day delivery, a FORS Silver accredited fleet covering 90% of the UK mainland, and the EDGE portal for agreed contract pricing and live delivery tracking.