MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 18 TPI - Metal Conduit and Pipe Cutting

MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 18 TPI - Metal Conduit and Pipe Cutting

The MAXTEC Bi-Metal Reciprocating Saw Blade is a 228mm 18 TPI metal cutting blade designed for precise, controlled cutting of conduit, steel pipe, pipe fittings, and sheet steel on standard reciprocating saws. The 18 TPI fine tooth pattern delivers a smooth cutting action that minimises burring on the cut edge, reducing the dressing and deburring time required before fitting or joining. The bi-metal construction combines a flexible alloy steel body with hardened HSS tooth tips, giving the blade the flexibility to resist breakage in tight access conditions whilst maintaining cutting aggression across repeated cuts on metal. For electricians, plumbers, and HVAC engineers who use a reciprocating saw daily on metal cutting tasks, this blade is built around the demands of professional installation work.

Why Choose the MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 18 TPI

• 18 TPI fine tooth pattern: delivers controlled, precise cuts on metal with minimal burring, reducing dressing time before fitting.

• Minimal vibration design: engineered to reduce vibration transfer to the operator during sustained metal cutting work.

• Bi-metal construction: flexible alloy steel body resists breakage in tight access conditions whilst HSS tooth tips maintain cutting aggression.

• 206mm working length: sufficient reach for pipe and conduit cutting in moderately confined access conditions.

• Suitable for conduit, pipe, fittings, and sheet steel: covers the full range of metal cutting tasks on electrical, plumbing, and HVAC installations.

• Pack of five: trade quantity suited to professional consumption rates on busy installation sites.

What's Included

• 5 x MAXTEC Bi-Metal Reciprocating Saw Blade, 228mm, 18 TPI

 Specifications

 Compatibility

Who Is This For?

The MAXTEC Bi-Metal Reciprocating Saw Blade 228mm 18 TPI is aimed at electricians, plumbers, heating engineers, and HVAC engineers who carry out metal cutting on installation and maintenance work. It suits the electrician cutting steel conduit and cable management in tight ceiling voids, the plumber cutting steel and copper pipe in confined joist bays, and the HVAC engineer cutting steel duct fittings and pipe connections on mechanical installations.

Typical Applications

• Cutting steel conduit and trunking during electrical first and second fix installations

• Cutting steel and copper pipe during plumbing and heating installations

• Cutting pipe fittings, connectors, and valve bodies during mechanical installations

• Cutting sheet steel panels and enclosures during electrical distribution installations

• Cutting stainless steel pipework on food grade and commercial catering installations

• Cutting non-ferrous metal components during HVAC and ventilation installations

• Cutting steel cable management systems during data and communications installations

How to Use

1. Fit the blade into the reciprocating saw blade clamp using the universal shank and confirm it is fully locked before operating.

2. Allow the saw to reach full speed before contacting the workpiece.

3. Apply steady, light forward pressure. The 18 TPI tooth pattern cuts precisely without forcing.

4. Keep the blade moving consistently through the cut to prevent heat build-up on thin metal sections.

5. Apply light cutting lubricant on thick-walled pipe and fittings to extend blade life.

6. Inspect the blade after each use and replace when teeth show visible wear.

Safety

• Eye protection to EN 166 is mandatory for all reciprocating saw operations.

• Wear cut-resistant gloves to EN 388 when handling and changing blades.

• Secure the workpiece firmly before cutting to prevent movement on breakthrough.

• Always locate concealed services before cutting through walls or ceilings.

• Never exceed the material thickness rating for this blade variant.

Maintenance

• Inspect blades before each use for cracked, chipped, or missing teeth.

• Clean metal swarf from the blade after each use before storage.

• Store blades flat in a dry environment to prevent corrosion.

• Replace blades when cutting performance deteriorates rather than forcing a worn blade.

Frequently Asked Questions

Q: What materials can this blade cut?

 A: The MX-1122EF cuts steel conduit, steel and copper pipe, pipe fittings, sheet steel, stainless steel, and non-ferrous metals. It is not designed for timber or masonry cutting.

Q: Why is 18 TPI the right choice for metal cutting?

 A: 18 TPI gives sufficient tooth engagement on metal sections from 1.5mm to 10mm thick, producing a controlled cut with minimal burring. Coarser TPI on thin metal causes the blade to grab and tear rather than cut cleanly.

Q: What does bi-metal mean on this blade?

 A: Bi-metal means the blade body is flexible alloy steel for breakage resistance, with hardened HSS teeth welded to the tips for cutting aggression and long tooth life on metal.

Q: Will this blade fit my reciprocating saw?

 A: Yes. The MX-1122EF uses a universal shank compatible with all major reciprocating saw brands including Bosch, DeWalt, Milwaukee, Makita, Metabo, and Fein.

Q: How many cuts can I expect per blade?

 A: Blade life depends on material hardness, thickness, and cutting technique. On standard steel conduit and pipe, applying light cutting lubricant and consistent forward pressure without forcing will maximise cuts per blade significantly.

Q: Why should I order from CMT Group?

 A: CMT Group has supplied UK construction sites since 2010 with next working day delivery, a FORS Silver accredited fleet covering 90% of the UK mainland, and the EDGE portal for agreed contract pricing and live delivery tracking.