Polyco Multi-Task 3™ Synthetic Leather Open Finger Gloves - Mechanics and Engineering

Polyco Multi-Task 3 Synthetic Leather Open Finger Gloves

The Polyco Multi-Task 3 is a mechanics-style work glove built for the specific challenge of tasks that require both hand protection and direct fingertip contact with components, fastenings, and precision parts. Three fingers are left fully open: the thumb, index finger, and middle finger. This is not a compromise. It is the deliberate design choice that makes this glove practical for engineering, electrical work, assembly, and maintenance tasks where a fully fingered glove forces operatives to remove their PPE every time they need to feel what they are doing. The synthetic leather palm with PVC-reinforced fingertips and inner palm padding provides durable mechanical protection across the covered areas, whilst the flexible neoprene knuckle panel allows the hand to flex naturally during gripping and tool use. Certified to EN 388:2016 + A1:2018 with a score of 2141X and carrying both CE Cat II and UKCA marking, the MT3 is a compliant, auditable specification for engineering and construction environments.

Why choose the Polyco Multi-Task 3 Synthetic Leather Open Finger Gloves

• Three open fingers solve the dexterity problem: Leaving the thumb, index, and middle fingers exposed removes the compromise between protection and precision, allowing operatives to handle small components and fastenings without taking the glove off.

• PVC-reinforced fingertips on the covered fingers: The fingers that remain covered carry PVC reinforcement at the tips, protecting the most vulnerable areas of a closed-finger glove without limiting the flexibility of the open-finger design.

• Synthetic leather palm with inner padding: The palm construction provides abrasion resistance and grip on tools and materials, whilst the inner padding reduces vibration and pressure during sustained hand tool use.

• Neoprene knuckle panel flexes with the hand: Strategically placed neoprene allows the glove to move naturally during gripping, twisting, and tool operation, avoiding the restriction that rigid synthetic panels introduce.

• Adjustable Velcro neoprene cuff: The combination of elasticated neoprene and a Velcro wrist strap provides a close, secure fit that stays in place during active work and prevents debris ingress at the wrist.

• CE Cat II and UKCA certified: Dual marking confirms compliance with both EU PPE Regulation 2016/425 and GB PPE Regulations 2002, covering sites operating under either framework.

• Sectors confirmed by manufacturer: Construction and utility, engineering and manufacturing, waste management and local authority.

What's included

1 x pair of Polyco Multi-Task 3 Synthetic Leather Open Finger Gloves in your chosen size.

 Specifications

Compatibility

Who is this for?

The Polyco Multi-Task 3 is specified by site managers, maintenance engineers, electrical installers, utilities operatives, and procurement teams supplying gloves for engineering, construction, and maintenance tasks where both hand protection and direct fingertip access are required simultaneously. The open-finger design makes it the correct choice for operatives who spend their shift alternating between tool use, which requires the protected palm, and component handling or cable work, which requires bare fingertip sensitivity. Available in sizes 9 and 10, supplied individually.

Typical applications

• Mechanical and electrical maintenance tasks involving small fastenings, connectors, and wiring where fingertip sensitivity is essential

• Engineering assembly tasks requiring both palm protection during tool use and direct finger contact with precision components

• Cable installation and management where exposed fingertips allow operatives to route, terminate, and test cables without removing gloves

• Construction site maintenance and snag tasks involving tools, fixings, and mixed material handling

• Utilities and infrastructure maintenance where operatives need sustained palm protection alongside direct fingertip access for valve operation and instrument reading

• Waste management and local authority tasks involving general handling where the open-finger format provides the dexterity required for varied task types

How to use

1. Select the correct size. Size 9 (L) corresponds to approximately 229 mm palm circumference, size 10 (XL) to approximately 254 mm.

2. Inspect the glove before use. Check synthetic leather for cracking, separation, or significant wear. Discard any damaged pair.

3. Don the glove and fasten the Velcro wrist strap over the neoprene cuff to secure the fit at the wrist.

4. Confirm the three open fingers are correctly positioned: thumb, index finger, and middle finger are exposed. The ring and little fingers remain covered.

5. Use for mechanics, engineering, construction, and utility tasks in dry conditions. The synthetic leather palm grip reduces in wet or oily conditions.

6. Unfasten the Velcro cuff when removing. Do not pull the glove off by the open fingers.

7. Wash hands thoroughly before donning and after removing gloves.

Safety

• CE Cat II and UKCA certified, EN 388:2016 + A1:2018, score 2141X. Level 2 abrasion and Level 4 tear resistance across the covered areas. The three open fingers provide no mechanical protection to the exposed fingertips.

• Not suitable for tasks requiring full finger protection. Confirm through risk assessment that exposed fingertips are acceptable for the specific task before issuing.

• Not rated for heat, chemical protection, or electrical insulation. Do not use where these hazards are present.

• Synthetic leather grip reduces significantly in wet or oily conditions. Use a coated glove for tasks involving liquid or oil contact.

Maintenance

Wipe the synthetic leather palm clean with a dry or lightly damp cloth after use. Do not machine wash or submerge in water as this degrades the synthetic leather and neoprene components. Allow to dry naturally away from direct heat. Store in dry conditions away from direct sunlight and extreme heat. Retain original polybag packaging for reference. Inspect before each use and discard if the synthetic leather shows cracking, separation at the seams, or significant surface wear.

Frequently Asked Questions

Q: Which three fingers are open on the Multi-Task 3?

 A: The thumb, index finger, and middle finger are left fully open. The ring finger and little finger remain covered by the synthetic leather construction. This configuration exposes the three fingers most commonly used for precision gripping, pinching, and direct component contact, whilst maintaining coverage on the fingers that most frequently contact abrasive surfaces during tool use.

Q: Why would I choose an open-finger glove over a fully fingered alternative?

 A: For tasks that require alternating between tool use and direct component handling, a fully fingered glove forces operatives to remove the glove every time they need fingertip sensitivity. An open-finger design removes that compliance failure point entirely. The MT3 is specifically designed for engineering and maintenance tasks where this alternation is constant throughout a shift.

Q: What does the EN 388:2016 + A1:2018 score 2141X mean for this glove?

 A: Abrasion resistance Level 2, blade cut resistance Level 1, tear resistance Level 4, puncture resistance Level 1, and X indicating the TDM cut test was not applicable. The standout figure is the Level 4 tear resistance, the maximum rating, which reflects the strength of the synthetic leather and PVC construction under sustained mechanical stress. The abrasion rating of Level 2 is lower than heavier-duty alternatives, which is a deliberate trade-off for the flexibility and close fit the MT3 prioritises.

Q: What is the difference between CE Cat II and UKCA marking?

 A: CE marking confirms compliance with EU PPE Regulation 2016/425, required for products placed on the EU market. UKCA marking confirms compliance with the equivalent GB PPE Regulations 2002, required for products placed on the UK market after Brexit. The MT3 carries both, confirming it meets the requirements of both frameworks and can be specified on sites operating under either regime.

Q: Is the MT3 suitable for electrical installation work?

 A: The open-finger design and dexterity make it practical for cable management, termination, and general electrical installation tasks. However, the MT3 is not rated for electrical insulation protection. It does not protect against electric shock or live working hazards. For live electrical work, a certified insulating glove under EN 60903 is required.

Q: Can this glove be used in wet conditions?

 A: Not recommended. Synthetic leather grip performance reduces significantly when wet. For tasks involving rain, moisture, or wet surfaces, a nitrile or PVC coated glove is the correct alternative. The MT3 is designed for dry mechanical and engineering environments.

Q: How does the Velcro neoprene cuff work?

 A: The cuff combines an elasticated neoprene base with an adjustable Velcro closure. The neoprene provides a close fit that conforms to the wrist, reducing debris ingress during site tasks. The Velcro strap allows the fit to be tightened to the individual operative's wrist circumference, preventing the glove from shifting during active hand movements.

Q: Why buy Polyco Multi-Task 3 gloves from CMT Group?

 A: CMT Group is a BSIF Registered Safety Supplier and holds ISO 9001:2015, CHAS Elite, and SSIP accreditations, meaning PPE products are sourced through a verified, compliant supply chain. Most orders are despatched for same or next working day UK mainland delivery when placed by 7pm online. Single pairs are available for individual operative issue, with case quantities of 10 pairs for site stores and framework procurement. Volume pricing is available through CMT's EDGE procurement portal.