NLG Construction Tool Tethering Kit is a ready-to-deploy tool tethering system for general construction, combining a Superlight Tool Belt, Belt Loop Anchors, D-rings, and lanyards in one kit.
- Superlight Safety Tool Belt included as the system base
- 2 Belt Loop Anchors provide certified anchor points
- 5 D-rings (2 Large, 3 Small) cover common tool sizes
- 2 GO Bungee Tool Lanyards for hand tool tethering
- Tether Tape included for smooth-bodied tools
NLG Construction Tool Tethering Kit - Ready-to-Deploy System for General Construction
NLG Construction Tool Tethering Kit is a ready-to-deploy tool tethering system for general construction, combining a Superlight Tool Belt, Belt Loop Anchors, D-rings, and lanyards in one kit.
- Superlight Safety Tool Belt included as the system base
- 2 Belt Loop Anchors provide certified anchor points
- 5 D-rings (2 Large, 3 Small) cover common tool sizes
- 2 GO Bungee Tool Lanyards for hand tool tethering
- Tether Tape included for smooth-bodied tools
Order 1x to earn 148 FASTPoints
Order to earn 148 FASTPoints
Log in to access trade discountsNLG Construction Tool Tethering Kit
NLG Construction Tool Tethering Kit is a ready-to-deploy tool tethering system built for general construction trades, combining all three tethering steps in a single purchase. Unlike a kit that supplies only tether points or lanyards, this one includes the NLG Superlight Safety Tool Belt itself as the system base, along with 2 Belt Loop Anchors to create certified anchor points on the belt. Around this, the kit adds 5 D-Rings across two sizes, Tether Tape for smooth-bodied tools, and 2 GO Bungee Tool Lanyards, giving a general construction worker a complete, wearable system straight out of the box.
A complete system, not just components
Many tool tethering kits supply tether points and lanyards but leave the anchor stage to the buyer, assuming a belt or harness is already in place. This kit takes a different approach: it includes the NLG Superlight Safety Tool Belt itself, so a worker with no existing tethering setup can go from box to fully equipped in one purchase. The 2 Belt Loop Anchors thread directly onto the belt, giving two certified attachment points from which lanyards can run to tethered tools, completing all three steps of the NLG system without needing to source a belt separately.
Key Features
-
NLG Superlight Safety Tool Belt: the system base, worn at the waist, providing the platform for anchors and holsters
-
2x Belt Loop Anchors: certified anchor points that thread directly onto the belt webbing
-
2x Large and 3x Small D-Rings: tool-side attachment points covering a range of common hand tool sizes
-
Tether Tape: self-amalgamating wrap for tools without a captive hole
-
2x GO Bungee Tool Lanyards: connect tethered tools to the belt-mounted anchors, absorbing shock on arrest
Who Is This For
Trades and roles:
-
General construction workers
-
Site operatives new to tool tethering
-
Carpenters, groundworkers, and general trades
-
Site managers equipping new starters
Industries:
-
Construction
-
Civil engineering
-
Facilities management
-
General building trades
Specifications
| Specification | Detail |
| Product Name | NLG Construction Tool Tethering Kit - Ready-to-Deploy System for General Construction |
| SKU | NLG101542 |
| Product Type | Complete individual tool tethering system with belt base |
| System Coverage | Step 1 (attachment), Step 2 (lanyard), Step 3 (belt and anchors) |
| Tool-Side Attachment Points | 5 (2 Large D-Ring, 3 Small D-Ring) |
| Lanyards Included | 2 (GO Bungee) |
| Anchor Points Included | 2 (Belt Loop Anchor), mounted on included tool belt |
| Total Products in Kit | 6 different products |
| Total Pieces in Kit | 11 individual pieces |
| NLG ID Technology | Present on eligible individual components |
Kit contents
| NLG Superlight Safety Tool Belt | 1x, Code NLG101420 |
| NLG Belt Loop Anchor | 2x, Code NLG101366 |
| NLG GO Bungee Tool Lanyard | 2x, Code NLG101518 |
| NLG Large D Ring Tool Tether | 2x, Code NLG101362 |
| NLG Small D Ring Tool Tether | 3x, Code NLG101361 |
| NLG Tether Tape | 1x, Code NLG101355 |
Compatibility
| Application or condition | Status |
| General construction tool tethering for a single operative | Compatible |
| Workers with no existing tool belt or anchor system | Compatible |
| New starters being equipped for the first time | Compatible |
| Teams needing to tether more than 5 tools simultaneously | See 25 Tool or 50 Tool kits |
| Use as a personal fall arrest or restraint system | Not recommended |
Who Is This For
The NLG Construction Tool Tethering Kit is used by general construction workers and site operatives who need a complete tool tethering system without needing to source a tool belt or anchor separately. It suits new starters equipping themselves for the first time and site managers standardising tool tethering across a general construction crew using a single matched kit that covers the belt, anchor, tether points, and lanyards all at once.
Typical Applications
-
Equipping a general construction worker with a complete, wearable tethering system before their first task at height.
-
Tethering common hand tools such as spanners, screwdrivers, and pliers using the included D-Rings and Tether Tape.
-
Providing a new starter with a full three-step system, including the belt itself, in one purchase.
-
Standardising tool belt and anchor equipment across a general construction crew.
How to Use
Step 1: Fit the Superlight Safety Tool Belt at the waist, adjusting for a secure, comfortable fit.
Step 2: Thread the 2 Belt Loop Anchors onto the belt webbing at convenient working positions.
Step 3: Fit the Large or Small D-Rings, or Tether Tape, to each hand tool requiring a tool-side attachment point.
Step 4: Connect the GO Bungee Tool Lanyards between the tethered tools and the Belt Loop Anchors.
Step 5: Log inspection of each NLG ID enabled component before first use and at each subsequent formal inspection interval.
Common Mistakes
-
Wearing the belt too loosely: a loose belt can shift position and affect the reliability of the anchor points during use.
-
Using the wrong D-ring size for the tool: match Large or Small D-Rings to the tool's captive hole for a secure fit.
-
Assuming this kit covers more than 2 lanyarded tools at once: for teams needing to tether more tools simultaneously, additional lanyards or the larger 25/50 Tool kits are the better fit.
-
Skipping pre-use inspection on individual components: each of the 6 products must be inspected according to its own product datasheet before use.
Safety
Each component within this kit carries its own individual load rating and safety standard, detailed on that product's own datasheet. There is no single kit-level load rating. Always match D-ring size and lanyard rating to the actual weight of the tool being tethered. This kit does not include personal fall arrest, restraint, or work positioning equipment.
Maintenance
Inspect the Superlight Safety Tool Belt's buckle and webbing, both Belt Loop Anchors, both D-Ring sizes, the Tether Tape, and both GO Bungee Lanyards before each use. Clean surface dirt with a water-dampened cloth, using a mild soap or detergent solution for more thorough cleaning. Wipe with a clean cloth and hang to dry away from excessive heat, steam, or sunlight. Complete a formal inspection using the NLG Inspection Checklist at intervals appropriate to frequency of use.
Frequently Asked Questions
Q: Does this kit include a tool belt, or just tether points and lanyards?
A: This kit includes the NLG Superlight Safety Tool Belt itself, along with 2 Belt Loop Anchors that thread directly onto it. This makes it a genuinely complete system for a worker with no existing tool belt, rather than a kit that only supplies tether points and lanyards.
Q: What exactly is included in the Construction Tool Tethering Kit?
A: The kit includes 1x Superlight Safety Tool Belt, 2x Belt Loop Anchors, 2x GO Bungee Tool Lanyards, 2x Large D-Ring Tool Tethers, 3x Small D-Ring Tool Tethers, and 1x Tether Tape, totalling 11 individual pieces across 6 product types.
Q: What is this kit best suited for?
A: This kit suits a general construction worker who needs a complete tool tethering system in one purchase, including the belt and anchors, without sourcing components separately. It's well suited to new starters and individuals equipping themselves for the first time.
Q: What is this kit NOT suitable for?
A: This kit is designed around 2 lanyards and 5 tether points for an individual worker, not for teams needing to tether large numbers of tools simultaneously; the 25 Tool or 50 Tool kits are better suited to bulk requirements. It does not include personal fall arrest, restraint, or work positioning equipment.
Q: Can additional components be added to this kit later?
A: Yes. Additional D-Rings, lanyards, or anchors can be purchased individually to expand the system as needed, using the Superlight Safety Tool Belt as the ongoing base.
Q: How should the components in this kit be maintained and inspected?
A: Inspect the belt's buckle and webbing, both Belt Loop Anchors, both D-Ring sizes, the Tether Tape, and both lanyards before each use. Clean with a water-dampened cloth and mild soap solution, then air dry away from heat and sunlight. Complete formal inspections using the NLG Inspection Checklist.
