Skip to the beginning of the images gallery

NLG tether tape 5kg self-amalgamating silicone green roll with NLG hub label front view | CMT Group UK

NLG Tether Tape Self-Amalgamating Tool Tether | CMT Group UK

NLG tether tape close-up showing fiberglass reinforcement mesh wave texture on stretched tape | CMT Group UK

NLG tether tape wrapped around pliers and D ring tool tether showing stretch activation bond | CMT Group UK

NLG tether tape complete instant tether system with D ring tether on pry bar | CMT Group UK

Self-amalgamating silicone tool tethering tape rated to 5kg, for creating load-rated tether points on any tool without adhesive, heat, or permanent modification.

5kg max load, dynamically tested at 2:1 safety factor
Certified to ANSI/ISEA 121-2023 and NS 9611:2022+AC
CE and UKCA marked
Stretch-activated self-amalgamating silicone: no adhesive, no residue, no surface damage on removal
Fiberglass reinforcement mesh provides tear and puncture resistance beyond standard self-amalgamating tape
Certified for immediate use on fitting, full bond develops within 24 hours at room temperature
Inherently flame retardant, effective temperature range -50°C to 250°C
One 2.8m roll creates tether points on approximately 10 hand tools

NLG Tether Tape - 5kg Self-Amalgamating Silicone Tool Tether

Code

NLG101355

2110+ In Stock

Self-amalgamating silicone tool tethering tape rated to 5kg, for creating load-rated tether points on any tool without adhesive, heat, or permanent modification.

5kg max load, dynamically tested at 2:1 safety factor
Certified to ANSI/ISEA 121-2023 and NS 9611:2022+AC
CE and UKCA marked
Stretch-activated self-amalgamating silicone: no adhesive, no residue, no surface damage on removal
Fiberglass reinforcement mesh provides tear and puncture resistance beyond standard self-amalgamating tape
Certified for immediate use on fitting, full bond develops within 24 hours at room temperature
Inherently flame retardant, effective temperature range -50°C to 250°C
One 2.8m roll creates tether points on approximately 10 hand tools

£50.47 £42.06

Buy 5 for £47.29 £39.41 each and save 6%
Buy 10 for £42.53 £35.44 each and save 16%

BULK DISCOUNT	5	10
Price	£39.41 £47.29	£35.44 £42.53

Order 1x to earn 42 FASTPoints

Order to earn 42 FASTPoints

2110+ In Stock

Product Details

NLG Tether Tape

Self-amalgamating silicone tape for creating 5kg rated tether points on any tool in seconds, without adhesive, without heat, and without permanent modification to the tool surface. Fiberglass reinforced for tear and puncture resistance significantly beyond standard self-amalgamating tape. Certified to ANSI/ISEA 121-2023 and NS 9611:2022+AC for immediate use as fitted. One 2.8m roll creates tether points on approximately ten hand tools. Part of the NLG Instant Tether System, used alongside D Ring tethers and Tether Choke variants. Made in the USA.

How Stretch Activation Creates a Load-Rated Tether Point Without Adhesive

Standard tether attachments require a captive hole, a handle, or a shaped section to grip onto. Most hand tools have none of these features built in, which leaves the site manager with the choice of sending tools away for modification or using improvised methods that carry no rating. Tether Tape solves this by creating the attachment point directly on the tool body. When stretched firmly during wrapping, the silicone fuses to itself under tension, no adhesive, no heat, no special equipment. The result is a certified, load-rated tether point on any tool in seconds, that peels away cleanly when no longer needed.

Key Features

Stretch-activated self-amalgamating silicone: Activated by stretching during wrapping. When the edges of the tape distort and become wavy during application, the stretch is correct and the bond is forming. No adhesive, no heat, no tools required.

Fiberglass reinforcement mesh: Embedded mesh provides tear and puncture resistance that standard electrical self-amalgamating tapes do not have. Maintains integrity in abrasive, dirty, and physically demanding site environments.

No adhesive, no residue: Because no adhesive is used, removing the Tether Tape leaves no sticky residue and causes no surface damage to the tool. Hire tools, premium tools, and tools that must be returned undamaged can all be tethered without concern.

5kg dynamic load rated: Certified to ANSI/ISEA 121-2023 and NS 9611:2022+AC, dynamically tested at 2:1 safety factor. Certified for immediate use on correct application, full bond develops within 24 hours at room temperature.

Inherently flame retardant: When burned, the tape forms a non-conductive ash. It does not produce conducting char or burning drips. Suitable for use in environments where ignition risk is a concern.

Extreme temperature performance: Effective from -50°C to 250°C. Works in cold-climate outdoor environments, high-heat industrial applications, and anywhere standard silicone tape would fail.

One roll, approximately ten tools: One 2.8m roll provides enough tape to create tether points on approximately ten hand tools based on a general selection. Efficient for bulk site preparation before working at height.

Who Is This For

Trades and roles:

Construction operatives preparing tools for height work
Electricians tethering tools near live systems (no adhesive contamination)
Scaffolders and steelworkers preparing site sets of tools for elevated work
Rope access technicians rigging tools before ascending
Site managers equipping multiple operatives with compliant tethered tools

Industries:

Construction and civil engineering
Electrical and building services
Oil, gas, and petrochemical
Telecoms and utilities
Wind energy and renewables
Rail and infrastructure

Specifications

Specification	Detail
Product Name	NLG Tether Tape - 5kg Self-Amalgamating Silicone Tool Tether
SKU	NLG101355
Product Type	Self-Amalgamating Silicone Tool Tethering Tape — Part of NLG Instant Tether System
Max Load (Tape)	5 KG / 11 LBS — tape rated load when used as tether attachment
System Load Note	When used as part of the NLG Instant Tether System with a D Ring Tether, system rating is determined by the lowest-rated component. Refer to individual D Ring rating.
Load Testing	Dynamic, 2:1 Safety Factor, Third-Party Certified
Safety Standards	ANSI/ISEA 121-2023, NS 9611:2022+AC
Compliance Markings	CE, UKCA
Material	Self-amalgamating silicone with fiberglass reinforcement mesh
Activation	Stretch activation — no adhesive, no heat, no specialist tools required
Bonding	Certified for immediate use on fitting. Full bond within 24 hours at room temperature.
Residue	None — adhesive-free, leaves no residue or surface damage on removal
Flame Retardance	Inherently flame retardant — forms non-conductive ash when burned
Temperature Range	-50°C to 250°C effective operating range
Dimensions per Roll	2.8m (L) x 25mm (W)
Tools per Roll	Approximately 10 tools on a general selection of hand tools
Max Lanyard Length	200 CM / 78 IN

Compatibility

Application or Companion Product	Status
NLG D Ring Loop Tethers (NLG101363, NLG101495) — wrap Tether Tape around D Ring and tool for hand tools without captive holes	✓ Compatible — primary pairing
NLG Tether Choke Single Arm (NLG101368) — wrap one Tether Tape length around securing arm for power tools	✓ Compatible
NLG Tether Choke Twin Arm (NLG101369) — wrap one Tether Tape length per arm for straight-shafted tools	✓ Compatible — two lengths required
Tools without captive holes, handles, or shaped sections — Tether Tape creates the attachment point	✓ Compatible
High-heat environments up to 250°C	✓ Compatible
Low-temperature outdoor environments down to -50°C	✓ Compatible
Tools with paint, lacquer, or coatings that must not be damaged	✓ Compatible — adhesive-free, no surface damage on removal
Tools weighing over 5kg (tape load rating)	✗ Not Suitable — check D Ring rating for complete system load
Use as a standalone tether without a D Ring Tether or Tether Choke variant	✗ Not Suitable — Tether Tape must be used with a compatible D Ring or Choke
Use as a load-bearing lanyard or anchor point	✗ Not Suitable — tool tether attachment only

Who Is This For

Tether Tape is used by workers who need to create a certified tether point on a tool that has no captive hole, no distinct handle geometry, and no feature that a ring or loop can attach to. It is also the correct choice for tools that must be tethered without permanent modification, for hire tools that cannot be damaged, and for tools where a quick retrofit tether point is needed at site level without sending tools away. As part of the NLG Instant Tether System, it is used alongside D Ring tethers for hand tools and with Tether Choke Single Arm and Twin Arm variants for power tools and straight-shafted tools.

Typical Applications

Creating a tether point on pliers, snips, and hand tools with no captive hole by wrapping Tether Tape around the tool body and a D Ring tether simultaneously.
Tethering hire tools and leased equipment that must be returned without surface modification or adhesive residue.
Preparing a set of tools at ground level before ascending to a scaffold or MEWP platform, so that all tools arrive at height ready for immediate lanyard connection.
Locking the securing arm of a Tether Choke Single Arm or Twin Arm in position on a power tool, using one Tether Tape length per arm.
Meeting the employer's duty under the Work at Height Regulations 2005 to prevent tools falling from height, including for tools that have no manufactured attachment point.

How to Use

Step 1: Select the correct D Ring Tether for your tool. For hand tools, choose the NLG D Ring Loop Tether or 360 D-Ring Loop. For power tools and straight-shafted tools, use with a Tether Choke Single Arm or Twin Arm.

Step 2: Cut a length of Tether Tape long enough to wrap around the tool at least six to eight times. Remove the plastic backing strip from the cut length.

Step 3: Check the tool surface is clean. Position the D Ring Tether against the tool with the label facing up and the webbing catch exposed.

Step 4: Wrap the Tether Tape firmly around the D Ring Tether and the tool body, stretching the tape firmly as you wrap. The correct stretch level is visible when the edges of the tape distort and become wavy. Insufficient stretch will reduce bond strength.

Step 5: Test the tether point before putting the tool into use by pulling firmly on the D Ring catch. The tape should not slip or shift.

Note: Full bond develops within 24 hours at room temperature. The tape is certified for immediate use upon correct application.

Common Mistakes

Not stretching the tape firmly enough during application. The self-amalgamating bond forms under tension. Tape that is wrapped without firm stretch will not achieve full bond strength and may slip under load. The wavy edge distortion is the visual confirmation that stretch is correct.
Not wrapping enough times. Six to eight wraps are required. Fewer wraps reduce the thickness of the bond and may not achieve the rated load.
Applying to a dirty or contaminated tool surface. Clean the tool body before wrapping. Oil, grease, or loose debris between the tape and the surface will prevent the bond from forming correctly around the D Ring tether.
Leaving the D Ring label covered. The label must remain exposed for inspection. Covering it makes the tether point harder to identify and inspect correctly.
Using Tether Tape without a D Ring or Tether Choke variant. Tether Tape alone is not a complete tether point. It must always be combined with a compatible D Ring tether or Tether Choke to create the rated attachment.

Safety

Tether Tape is rated to 5kg maximum load. When used as part of the NLG Instant Tether System with a D Ring tether, the system load rating is determined by the lowest-rated component. Check the rating of the D Ring used. This tape is a tool tether attachment component and must not be used as a standalone lanyard or anchor point. After any drop event, remove the Tether Tape from the tool and inspect the D Ring before reusing. Cut away and replace Tether Tape that has been involved in a drop. Employers have a duty under the Work at Height Regulations 2005 to take suitable steps to prevent tools falling from height.

Maintenance

Tether Tape is a consumable. Inspect the wrapped tape before each use for any loosening, tearing, or slippage on the tool body. If the tape has shifted or shows signs of degradation, cut it away and replace with a fresh length. After use, the D Ring tether can be retained and reused on a different tool, cut the tape cleanly away, confirm the D Ring is undamaged, and apply fresh Tether Tape for the next tool. Store unused tape away from direct sunlight and heat sources.

Frequently Asked Questions

Q: What is the difference between NLG Tether Tape and standard self-amalgamating tape?
A: Standard self-amalgamating tape is typically used for electrical insulation and carries no load rating for tool tethering applications. NLG Tether Tape is certified to ANSI/ISEA 121-2023 and NS 9611:2022+AC with a 5kg dynamic load rating tested at 2:1 safety factor. It also carries a fiberglass reinforcement mesh that standard self-amalgamating tape does not, providing significantly greater tear and puncture resistance. The two products look similar but are designed and certified for completely different purposes.

Q: What load does the complete Instant Tether System carry?
A: The Tether Tape itself is rated to 5kg. When used as part of the NLG Instant Tether System with a D Ring tether, the system rating is determined by the lowest-rated component in the combination. The D Ring Tether selected must also be rated to the weight of the tool. Check the individual D Ring rating for the complete system load capacity.

Q: How many tools can one roll tether?
A: Based on a general selection of hand tools, one 2.8m roll provides enough tape to create tether points on approximately ten tools when each application uses six to eight wraps. Larger tools and more wraps per application will reduce the number of tools per roll. For site preparation of larger tool sets, ordering multiple rolls ensures a continuous supply without interruption.

Q: How do I know the tape has been stretched correctly during application?
A: The correct stretch level is visible during wrapping — when the tape is stretched firmly, the edges of the tape distort and become wavy. This distortion is the visual confirmation that the self-amalgamating bond is forming correctly. If the edges remain flat and smooth during wrapping, the tape is not being stretched sufficiently and should be rewrapped with more tension.

Q: Will Tether Tape damage the tool surface when removed?
A: No. Tether Tape uses no adhesive at any point in its application or bonding process. The self-amalgamating bond forms between layers of tape only, not between the tape and the tool surface. When cut away, the tape releases cleanly, leaving no sticky residue and causing no surface damage. It is safe to use on hire tools, coated or painted tools, and any tool that must be returned in original condition.

Q: What is the flame retardant property and when does it matter?
A: Tether Tape is inherently flame retardant throughout its silicone construction. When exposed to flame, it forms a non-conductive ash rather than producing burning drips, conducting char, or a flammable residue. This property matters in electrical work environments, ATEX-classified explosive atmosphere zones, and any application where the behaviour of a material under heat or ignition is a site safety concern.

Q: What tools can Tether Tape be used on?
A: Tether Tape can be used to create a tether point on virtually any hand tool regardless of whether it has a captive hole, handle, or shaped section, because the tape creates the attachment point directly on the tool body. It is used with D Ring tethers for hand tools and with Tether Choke Single Arm and Twin Arm variants for power tools and straight-shafted tools. The only requirement is that the tool surface is clean and the total tool weight does not exceed the system load rating.

Q: Can I reuse the Tether Tape after removing it from a tool?
A: No. Once Tether Tape has been applied and bonds have formed, it is a single-use consumable. When the tether point is no longer needed, cut the tape away cleanly and discard it. The D Ring tether or Tether Choke used alongside the tape can be retained and reused on a new tool with fresh Tether Tape.

Knowledge Centre