Water Cooler Dispenser - 110V and 240V Floor Standing

Water Cooler Dispenser - 110V and 240V Floor Standing

This floor-standing water cooler dispenser delivers chilled and ambient drinking water wherever a mains water supply is not available. Available in both 110V and 240V, it is the practical choice for construction site welfare facilities, temporary event setups, remote offices, and any workspace where a standard plumbed-in cooler is not feasible.

Under CDM 2015 and HSE welfare regulations, drinking water must be readily accessible on every UK construction site. This dispenser meets that requirement directly. The 110V variant is specifically suited to UK construction sites where 110V is the standard supply voltage for electrical equipment on site. The 240V variant covers offices, events, and welfare units with standard mains supply.

Fits 15L and 20L water bottles, compatible with CMT's own water bottle range, sold separately.

Why Choose This Water Cooler Dispenser

• Dual voltage availability: the 110V variant is purpose-built for UK construction sites where 110V centre-tapped earth supply is standard. No adaptor or transformer required.

• Cold and ambient in one unit: two taps dispense chilled water at 12 to 15°C and room-temperature water simultaneously, covering both drinking and food preparation needs in a site welfare facility.

• Fits 15L and 20L bottles: compatible with the most widely used bottle formats on UK construction sites and workplaces. Works directly with CMT's water bottle range for a single-supplier welfare solution.

• Compact footprint: at 310 x 305 x 855mm and 5.5kg, the unit is easy to move, position, and relocate as site compounds change.

• BS plug supplied: ready to use out of the box on any compatible UK supply. No additional electrical work required.

What's Included

One floor-standing water cooler dispenser with BS plug and 1.6m cable. Supplied in the specified voltage variant. Water bottles sold separately.

 Specifications

Compatibility

Who Is This For?

Site managers, welfare coordinators, facilities managers, and event organisers responsible for providing compliant drinking water in locations without mains water access. The 110V variant is specifically for UK construction, civil engineering, and infrastructure sites. The 240V variant suits temporary offices, welfare units, events, and remote workspaces on standard mains supply.

Typical Applications

• Construction site welfare facilities where HSE regulations require accessible drinking water

• Site offices and compound welfare units on 110V supply

• Temporary event and festival welfare setups

• Remote workspaces, portacabins, and off-grid offices

• Infrastructure and utility project sites without permanent mains water

• Film and TV production locations requiring welfare facilities

How to Use

1. Position the unit on a level, stable surface in the welfare area.

2. Remove the bottle cap and invert a 15L or 20L water bottle onto the bottle mount at the top of the unit.

3. Allow the bottle to seat fully. Water will flow into the reservoir automatically.

4. Connect the BS plug to the appropriate supply: 240V mains or 110V site supply depending on variant.

5. Allow the unit to cool for approximately 30 minutes before dispensing chilled water.

6. Use the left tap for ambient water and the right tap for chilled water.

7. Replace the bottle when empty. Switch off and unplug before changing bottles.

Safety and Maintenance

• Position the unit away from direct sunlight and heat sources. Ambient heat reduces cooling efficiency and increases energy consumption.

• Clean the drip tray regularly to prevent standing water and bacterial growth.

• Wipe the tap nozzles and bottle contact point with a food-safe sanitising solution at least once per week on high-use sites.

• Do not use bottles that are cracked, damaged, or have been left open and exposed. Contaminated water is a welfare and compliance risk.

• On long-term site deployments, sanitise the internal reservoir every three months in line with standard water cooler hygiene practice.

• Store unused bottles upright in a cool, shaded location away from direct sunlight and chemical storage areas.

Frequently Asked Questions

Q: What is the difference between the 110V and 240V variants?

 A: The only difference is the power supply voltage. The 110V variant is designed for UK construction sites where 110V centre-tapped earth supply is the standard for electrical equipment. The 240V variant operates on standard UK mains supply and is suitable for offices, welfare units, events, and any location with a standard mains connection. Both variants deliver identical cooling performance and bottle compatibility.

Q: Why is 110V standard on UK construction sites?

 A: In the UK, 110V centre-tapped earth supply is the industry-standard voltage for electrical equipment on construction sites. It is specified under HSE guidance and widely adopted across the industry because the centre-tap configuration limits the maximum shock voltage to 55V in the event of a fault, significantly reducing the risk of a fatal electric shock. Any electrical equipment used on a UK construction site should be 110V rated unless a specific risk assessment justifies the use of 240V with appropriate RCD protection.

Q: Does this dispenser require plumbing or installation?

 A: No. This is a standalone bottled water dispenser. It requires only a compatible power supply and a 15L or 20L water bottle. There is no plumbing, no installation, and no specialist setup required. Plug in, load the bottle, and the unit is ready within 30 minutes.

Q: Is this dispenser compliant with HSE welfare requirements for construction sites?

 A: Yes. HSE welfare regulations under CDM 2015 require that drinking water is readily accessible and clearly marked on all UK construction sites. This floor-standing dispenser provides a clearly identifiable, accessible drinking water point that meets that requirement. The 110V variant ensures compliance with standard site electrical supply requirements at the same time.

Q: How long does a 15L bottle last on a typical construction site?

 A: On a site with 10 to 15 operatives, a 15L bottle typically lasts one to two working days depending on temperature and work intensity. In warm weather or on physically demanding sites, consumption increases significantly. CMT supplies 15L water bottles separately, available for next working day delivery alongside the dispenser on the same order.

Q: Can I use this dispenser outdoors?

 A: The unit is designed for indoor or covered welfare facility use. It should not be exposed to direct rain, standing water, or extreme temperatures. On site, it is best positioned inside a welfare unit, portacabin, or covered compound area. Outdoor use in exposed conditions risks electrical safety issues and reduces cooling efficiency.

Q: Why order the water dispenser and water bottles from CMT Group?

 A: CMT Group supplies both the dispenser and the compatible water bottles, meaning the full welfare hydration solution arrives on a single order, on a single invoice, with next working day delivery. CMT operates a fleet of over 100 FORS Silver accredited vehicles covering 90% of the UK mainland, with VIP dedicated delivery available for urgent site welfare requirements. Trade accounts and EDGE procurement portal access are available for contractors managing welfare supply across multiple sites.