Practical safety and maintenance guidance for anyone storing water above ground on a UK site, covering hygiene, ground preparation, weather exposure, fittings and what to do if a tank fails.
Loading...
This 1600 litre eco water storage tank gives farms, irrigation systems and commercial sites a durable way to store potable and recycled water above ground.
- WRAS approved material for potable water storage
- Round one piece moulded body for added strength
- Made from UV stabilised MDPE for long term weather resistance
- Suitable for irrigation systems and livestock watering
- Above ground installation, no groundworks needed
- Can be fitted with a tap outlet or pipework insert
1600 Litre Eco Water Storage Tank
Code
GW100013
This 1600 litre eco water storage tank gives farms, irrigation systems and commercial sites a durable way to store potable and recycled water above ground.
- WRAS approved material for potable water storage
- Round one piece moulded body for added strength
- Made from UV stabilised MDPE for long term weather resistance
- Suitable for irrigation systems and livestock watering
- Above ground installation, no groundworks needed
- Can be fitted with a tap outlet or pipework insert
£412.80
£344.00
Order 1x to earn 344 FASTPoints
Order to earn 344 FASTPoints
Log in to access trade discounts
In Stock
Eco Water Storage Tank - 1600 Litre
A round, single skin water storage tank built to handle sustained outdoor use on farms, irrigation systems and commercial sites. At 1600 litres, it holds a substantial reserve of water in a 1220mm diameter footprint, moulded in one piece from UV stabilised MDPE for long term weather resistance. The material carries WRAS approval, so the tank is rated for both potable and recycled water storage.
How weather resistance keeps a tank working season after season
A tank left outdoors year round faces constant UV exposure, temperature swings and, on farms, physical knocks from equipment and livestock. Cheaper materials can fade, become brittle or crack under that kind of sustained wear, leaving buyers replacing tanks more often than they should. This tank's UV stabilised MDPE construction is built to withstand that ongoing exposure, giving it a realistic long term working life in permanent outdoor use.
Key Features
-
WRAS approved material: Independently verified as safe for potable water storage, not just general use
-
UV stabilised MDPE: Built to withstand years of outdoor UV exposure and temperature change
-
One piece moulded body: Round, single skin construction adds strength with no seams or joints
-
Insert ready base: Can be fitted with a tap outlet or connecting pipework
-
Irrigation and livestock ready: Suited to feeding irrigation systems or supplying livestock water points
-
Substantial capacity: Holds 1600 litres in a 1220mm diameter footprint
Who is this for
Trades and roles:
-
Farmers and smallholders
-
Site managers
-
Facilities managers
-
Groundworkers
Industries:
-
Agriculture
-
Construction
-
Facilities management
-
Commercial premises
Specifications
| Specification | Detail |
| Product Name | 1600 Litre Eco Water Storage Tank |
| SKU | GW100013 |
| Tank Type | Eco water storage tank, round single skin |
| Capacity | 1600 litres |
| Material | UV stabilised MDPE, WRAS approved |
| Construction | One piece moulded |
| Installation | Above ground |
| Water Suitability | Potable and recycled water storage |
| Diameter | 1220mm |
| Height | 1680mm |
Compatibility
| Application or condition | Status |
| Potable drinking water storage | Compatible, WRAS approved |
| Recycled water storage | Compatible |
| Irrigation systems | Compatible |
| Livestock watering | Compatible |
| Commercial water storage | Compatible |
| Below ground or buried installation | Not recommended |
| Storage of chemicals or fuel | Not recommended |
| Connection to pressurised water systems | Not recommended |
Who is this for
This tank suits farmers and smallholders needing a reliable water point for livestock or a feed source for irrigation systems, as well as site managers and facilities teams wanting a WRAS approved backup supply for rural properties or commercial premises. Its round, single skin construction is built for permanent outdoor exposure, so it works equally well on farms with year round livestock access and on commercial sites needing a bulk water reserve.
Typical applications
-
Feeding livestock water points and troughs on farms with a reliable above ground reserve.
-
Supplying irrigation systems across larger agricultural plots and commercial grounds.
-
Storing WRAS approved potable water as a backup supply for rural properties or site cabins.
-
Holding recycled water for wash down, dust suppression or non drinking site use.
-
Collecting and storing rainwater for reuse across irrigation and general outdoor tasks.
-
Acting as a long term water reserve for commercial sites operating year round outdoors.
How to use
Step 1: Position the tank on firm, level ground with enough clearance for the full 1220mm diameter base.
Step 2: Fit a tap outlet or connecting pipework insert at the base for irrigation, livestock or general use.
Step 3: Connect the inlet to a rainwater diverter or mains fill point, depending on the water source.
Step 4: Check the lid is fully seated before use to keep out debris and prevent algae growth.
Step 5: Inspect the tank periodically for cracking, discolouration or leaks after long UV exposure.
Common mistakes
-
Positioning the tank where livestock can knock or chew at fittings, which risks damaging the outlet or lid.
-
Leaving the lid loose or missing, which lets in debris, insects and sunlight that encourages algae.
-
Fitting a tap or pipework insert without following the correct method, which can compromise the seal.
-
Assuming the tank is rated for burial and installing it below ground, which it is not built for.
-
Overfilling past the rated capacity, which puts unnecessary strain on the tank walls.
Safety
This tank is designed for above ground installation only and is not rated for burial or below ground use. It is not suitable for storing chemicals, fuel or any liquid outside its intended water storage use. Keep the lid fitted at all times to prevent contamination and reduce the risk of accidental access, particularly on sites with livestock or children present.
Maintenance
Rinse the interior periodically to remove sediment and prevent algae build up, especially where the tank collects rainwater. Check the lid seal, tap outlet and any fitted pipework for wear every few months, and more often where livestock have access to the tank. Keep the surrounding area clear of overhanging vegetation that could drop debris into an open inlet.
Frequently Asked Questions
Q: Is this tank approved for storing drinking water?
A: Yes. The material used in this tank carries WRAS approval, confirming it meets UK water quality standards for water it comes into contact with. That makes it suitable for potable water storage as well as recycled water, irrigation and livestock use.
Q: What does WRAS approval actually mean?
A: WRAS stands for the Water Regulations Advisory Scheme, the body responsible for assessing materials and fittings against UK water supply regulations. A WRAS approved material has been tested to confirm it won't contaminate water it holds, covering factors like taste, odour and chemical safety. For a tank doubling as a drinking water source on a farm or site, that independent verification matters more than a general potable claim.
Q: What is this tank not suitable for?
A: It's designed for above ground installation only and is not rated for burial or underground use. It should not be used to store chemicals, fuel or any liquid other than water. It is also not designed for direct connection to a pressurised mains water system.
Q: Why choose the 1600 litre tank over the smaller 1200 litre model?
A: The extra 400 litres gives more headroom for irrigation systems or livestock demand that draws down steadily through the day, reducing how often the tank needs refilling. Both tanks share close to the same diameter footprint, so the capacity increase mostly adds height rather than floor space. For farms or commercial sites with higher daily water use, that extra reserve reduces the risk of running dry during peak demand.
Q: Can this tank supply an irrigation system directly?
A: Yes. The tank can be fitted with an insert for a tap outlet or connecting pipework, which allows it to feed a hose, drip system or pump directly. Fitting should follow the correct method to keep the seal intact, and a pump may be needed if the irrigation system requires more pressure than gravity feed provides.
Q: How does this tank hold up to long term outdoor use on a farm?
A: The UV stabilised MDPE construction is built to withstand ongoing sun exposure and temperature changes without becoming brittle or fading significantly. The one piece moulded body has no seams to fail under pressure, and the round profile sheds rain and debris cleanly. Checking the lid, fittings and base periodically, especially where livestock have access, helps keep it performing over the long term.
