Professional alkaline multi-surface cleaner for removing grease and soiling from floors, worktops, tiles, and hard surfaces in welfare units and site facilities.
- Alkaline formula, pH 11.4
- Nitrile rubber gloves (ISO 374-1) & safety glasses (ISO 16321-1) required during use
- Anionic, non-ionic, and amine oxide surfactant blend
- Rapidly degradable surfactant formulation
Multi Surface Cleaner 5L
Professional alkaline multi-surface cleaner for removing grease and soiling from floors, worktops, tiles, and hard surfaces in welfare units and site facilities.
- Alkaline formula, pH 11.4
- Nitrile rubber gloves (ISO 374-1) & safety glasses (ISO 16321-1) required during use
- Anionic, non-ionic, and amine oxide surfactant blend
- Rapidly degradable surfactant formulation
- Buy 12 for £12.68 £10.57 each and save 8%
- Buy 24 for £10.79 £8.99 each and save 21%
| BULK DISCOUNT | 12 | 24 |
|---|---|---|
| Price | £10.57 £12.68 | £8.99 £10.79 |
Order 1x to earn 11 FASTPoints
Order to earn 11 FASTPoints
Log in to access trade discountsMulti Surface Cleaner 5L
Professional alkaline multi-surface cleaner at pH 11.4 for removing grease, boot-in soil, food deposits, and organic contamination from hard surfaces throughout welfare unit canteens, site offices, and construction compound facilities. Formulated with an anionic, non-ionic, and amine oxide surfactant blend, the highly alkaline formula breaks down grease and protein-based soiling at the molecular level, delivering effective cleaning on floors, worktops, tiles, and wall panels where neutral-pH spray cleaners require repeated applications to achieve the same result. For professional use only: nitrile rubber gloves and safety glasses are required throughout handling and application.
How alkaline pH outperforms neutral cleaners on site welfare surfaces
Neutral-pH multi-surface cleaners rely on surfactant chemistry alone to lift soiling, which is adequate for light contamination but struggles with the grease, boot-in soil, and accumulated organic residue that builds up rapidly on welfare unit canteen floors, worktops, and tiled surfaces during active construction phases. Repeated application of an underpowered cleaner leaves residual soiling, increases cleaning time per shift, and risks failing the welfare facility hygiene standards required under CDM Regulations on managed sites. At pH 11.4, the alkaline formula breaks down grease and protein-based soiling through saponification alongside the surfactant action, lifting contamination from hard surfaces more efficiently than neutral alternatives and reducing the number of applications needed per cleaning cycle.
Key Features
-
Alkaline degreasing formula: pH 11.4 breaks down grease, oil residue, and protein-based soiling through alkaline chemistry alongside the surfactant blend, outperforming neutral-pH products on welfare compound hard surfaces.
-
Three-surfactant blend: Anionic surfactant, non-ionic surfactant, and amine oxide work together to deliver effective wetting, lifting, and dispersion of soiling across multiple surface types in a single product.
-
Multi-surface suitability: Suitable for hard floor surfaces, worktops, tiles, wall panels, and general non-porous hard surfaces throughout welfare unit canteens, washrooms, and site office facilities.
-
5 Litre bulk format: Reduces restocking frequency for welfare compound cleaning stores across longer-duration projects, providing sufficient volume for extended cleaning schedules.
-
Rapidly degradable surfactants: All surfactants comply with biodegradability requirements under detergent regulations.
-
PPE mandatory: Nitrile rubber gloves (ISO 374-1) and safety glasses (ISO 16321-1) must be worn during all handling and application. For professional use only.
Who is this for
Trades and roles:
-
Welfare unit operatives
-
Site managers
-
Facilities managers
-
Maintenance contractors
-
Compound managers
Industries:
-
Construction
-
Civil engineering
-
Utilities and groundworks
-
Industrial facilities management
-
Property maintenance
Specifications
| Specification | Detail |
|---|---|
| Product Name | Multi Surface Cleaner 5L |
| SKU / Product Code | JLHSC05 |
| Fixed Specifications | |
| Product Type | Professional alkaline multi-surface cleaner |
| Application | Degreasing and cleaning of hard surfaces in welfare units and site facilities |
| Use Category | For professional use only |
| Surfactant Blend | Anionic surfactants less than 5%, non-ionic surfactants less than 5%, amine oxide 0.1 to 1% |
| Detergent Labelling | Anionic surfactants, non-ionic surfactants less than 5%, perfumes |
| pH | 11.4 (highly alkaline) |
| Odour | Sharp |
| Physical State | Liquid |
| Biodegradability | Rapidly degradable |
| Hazard Classification | WARNING, GHS07 — H319 causes serious eye irritation |
| Required PPE | Nitrile rubber gloves (ISO 374-1), safety glasses (ISO 16321-1) |
| Ventilation | Ensure good ventilation of the work area during use |
| Storage | Store in a well-ventilated, cool place. Keep container closed when not in use. |
| Variable Specifications | |
| Volume | 5 Litre |
| Relative Density | 1.012 |
Compatibility
| Surface or Application | Status |
|---|---|
| Hard floor surfaces (vinyl, concrete, ceramic) | ✓ Compatible |
| Ceramic and porcelain tiles | ✓ Compatible |
| Non-porous worktops and work surfaces | ✓ Compatible |
| Painted and sealed wall panels | ✓ Compatible |
| Stainless steel surfaces (rinse thoroughly after use) | ✓ Compatible |
| General non-porous hard surfaces | ✓ Compatible |
| Natural stone (marble, limestone, granite) | ✗ Not recommended — alkaline pH damages acid-sensitive stone |
| Bare or uncoated aluminium | ✗ Not recommended — alkaline chemistry can attack aluminium |
| Waxed or unfinished wood floors | ✗ Not recommended — not suitable for porous or absorbent surfaces |
| Food contact surfaces without rinsing | ✗ Not recommended — rinse thoroughly after cleaning |
| Consumer or domestic use | ✗ Not recommended — professional use only |
Who is this for
Welfare unit operatives and site facilities managers responsible for the daily and periodic cleaning of hard surfaces throughout construction compound welfare facilities, including canteen floors, kitchen worktops, tiled walls, and site office surfaces. Maintenance contractors undertaking deep cleans of welfare units at the end of project phases or during periodic welfare facility audits will find the alkaline formula suited to tackling accumulated grease and organic soiling that neutral-pH cleaners have not removed. Site managers with CDM welfare compliance obligations who need a single professional-grade product for multi-surface hard surface cleaning across a compound will find the 5 Litre format provides sufficient volume for extended cleaning schedules without frequent restocking.
Typical applications
-
Cleaning hard floor surfaces in site welfare unit canteens and washrooms where boot-in soil, grease, and general contamination accumulates rapidly during active construction phases.
-
Degreasing canteen worktops and food preparation surfaces in welfare unit kitchens where grease and food residue have built up across multiple shifts throughout the working week.
-
Cleaning wall tiles and splash-back panels in welfare unit washrooms and kitchen areas where soap residue, grease, and general soiling require more than a light-duty spray cleaner.
-
General hard surface cleaning in site compound offices, meeting rooms, and administrative areas where regular maintenance cleaning is required throughout a project.
-
Periodic deep cleaning of welfare unit floors using a mop and bucket application to tackle accumulated soiling between regular cleaning cycles on longer-duration sites.
-
Cleaning compound welfare unit entry areas and boot rooms where heavy contamination from site footwear is tracked onto hard floor surfaces.
How to use
Step 1: Put on nitrile rubber gloves (ISO 374-1) and safety glasses (ISO 16321-1) before handling the product or opening the container.
Step 2: Dilute the product in water according to the instructions on the product label before application. The dilution rate will depend on the level of soiling and the surface type.
Step 3: Apply the diluted solution to the surface using a mop, cloth, or sponge as appropriate for the surface type and area.
Step 4: For heavily soiled surfaces, allow the solution to dwell briefly before wiping or mopping to give the alkaline formula time to break down grease deposits.
Step 5: Rinse surfaces with clean water after cleaning where food preparation or high-contact surfaces are involved.
Step 6: Replace the container lid securely after use. Wash hands thoroughly with soap and water.
Step 7: Store the container in a cool, well-ventilated location away from heat sources.
Common mistakes
-
Handling without PPE: both gloves and eye protection are mandatory for this product throughout all handling and application. The pH of 11.4 and WARNING classification require full PPE compliance, not optional precaution.
-
Not diluting before use: refer to the product label for dilution guidance before applying to surfaces. Applying an unnecessarily high concentration does not improve cleaning performance and wastes product.
-
Using on acid-sensitive surfaces: natural stone including marble, limestone, and some granites is sensitive to alkaline products at pH 11.4. Do not apply to these surfaces.
-
Not rinsing food contact surfaces: always rinse food preparation areas and any surface that may contact food after cleaning to remove all product residue.
-
Poor ventilation during use: the SDS requires good ventilation of the work area. Do not use in enclosed spaces without adequate air movement.
-
Storing in unlabelled containers: never decant into unlabelled or unsuitable containers. Always keep in the original container with the lid secured.
Safety
WARNING classification (Signal Word: Warning). H319: causes serious eye irritation. Wear safety glasses (ISO 16321-1) and nitrile rubber gloves (ISO 374-1) during all handling and application, both are mandatory, not precautionary. If eye contact occurs, rinse cautiously with water for several minutes, remove contact lenses if present, and seek medical attention if irritation persists. Wash hands thoroughly after use. Do not eat, drink, or smoke when using this product. Ensure good ventilation of the work area during use. Keep out of reach of children. For professional use only. The full Safety Data Sheet is available for download at cmt.co.uk.
Maintenance
Replace the container lid securely after each use to prevent contamination and evaporation. Store in a cool, well-ventilated location away from heat sources and direct sunlight. Inspect the container for damage or leakage before each use. Do not decant into unlabelled containers. Dispose of contents and container in accordance with local regulations.
Frequently Asked Questions
Q: What surfaces is this multi-surface cleaner suitable for?
A: This product is suitable for hard floor surfaces including vinyl, ceramic, concrete, and sealed floors, as well as worktops, ceramic tiles, painted wall panels, stainless steel, and general non-porous hard surfaces throughout welfare units, canteens, and site office facilities. It is not suitable for natural stone such as marble or limestone, bare aluminium, waxed or unfinished wood, or any porous surface that cannot be rinsed with water after cleaning.
Q: Why does this cleaner have a pH of 11.4?
A: pH 11.4 places this product firmly in the highly alkaline range. Alkaline chemistry is effective against grease, oil residue, and protein-based soiling because it triggers saponification, breaking down fat and oil molecules into water-soluble compounds that can be rinsed away. On construction site welfare surfaces where boot-in grease, canteen food residue, and general organic soiling accumulate rapidly, the alkaline formula removes contamination in fewer applications than neutral-pH alternatives. Neutral cleaners work through surfactant chemistry alone and cannot achieve the same result on heavily soiled welfare surfaces without significantly more product and effort.
Q: What PPE is required when using this product?
A: Both nitrile rubber gloves meeting ISO 374-1 and safety glasses meeting ISO 16321-1 are mandatory throughout all handling and application. This is not a precautionary recommendation, the SDS specifies both as required PPE for normal conditions of use. Skin and body protection and respiratory protection are not required under normal use conditions, but good ventilation of the work area must be maintained throughout.
Q: What surfaces must this product NOT be used on?
A: Do not use on natural stone surfaces including marble, limestone, or some granites, the alkaline pH will damage acid-sensitive stone. Do not use on bare or uncoated aluminium, which can be attacked by highly alkaline products. Do not use on waxed or unfinished wood floors, which are porous and unsuitable for liquid cleaning products at this pH. Always rinse food contact surfaces thoroughly with clean water after cleaning.
Q: Does this product need to be diluted before use?
A: Refer to the product label for dilution guidance before use. As with all professional-use cleaning products, the appropriate concentration will depend on the level of soiling and the surface being cleaned. Following the label dilution instructions ensures effective cleaning performance and avoids unnecessary product waste.
Q: How does this compare to a standard spray surface cleaner for site welfare use?
A: A standard ready-to-use spray cleaner is formulated for light daily cleaning at a neutral or near-neutral pH, typically suited to low-contamination office and domestic environments. This product operates at pH 11.4 with a three-surfactant blend including amine oxide, making it significantly more effective on the grease, organic soiling, and boot-in contamination typical of construction welfare facilities. The 5 Litre concentrate format also offers a lower cost per application than single-use spray products for sites covering multiple surfaces across large welfare compounds.
Q: Is this product safe to use on food preparation surfaces in the welfare canteen?
A: Yes, but all surfaces that may come into contact with food must be rinsed thoroughly with clean water after cleaning to remove all product residue before the surface is used for food preparation or service. The product is not a food-safe sanitiser — it is a professional degreasing cleaner, and thorough rinsing is required wherever food contact is possible.
