Elasticated armband with a built-in Klick Fast dock for wearing the Dustlight Mini personal dust monitor on the upper arm, forearm, or wrist.
Elasticated armband with a built-in Klick Fast dock for wearing the Dustlight Mini personal dust monitor on the upper arm, forearm, or wrist.
| BULK DISCOUNT | 10 | 20 |
|---|---|---|
| Price | £39.70 £47.64 | £36.81 £44.17 |
Order 1x to earn 44 FASTPoints
Order to earn 44 FASTPoints
Log in to access trade discountsElasticated armband with a built-in Klick Fast dock, designed for wearing the Dustlight Mini personal dust monitor on the upper arm, forearm, or wrist. The Velcro inner lining wraps around the arm without permanent alterations to clothing. A non-slip textured inner surface grips against sleeves to keep the band in position during active work.
Compatible with all Peter Jones Klick Fast connectors. A connector must be fitted to the Dustlight Mini separately before it can be docked. Also available in hi-vis orange and hi-vis yellow as separate SKUs.
A plain elasticated band relies on friction alone to hold position over a sleeve. That friction drops quickly on smooth base layers and work shirts, and the band slides down within minutes of active movement. The Klick Fast Armband uses a textured non-slip surface on the inner lining, backed by a Velcro wrap that fastens at any point around the arm. That combination holds position on bare skin and over clothing throughout a shift, without the band needing to be repositioned.
Non-slip textured inner surface: Grips against sleeve fabric during bending, reaching, and lifting. Keeps the dock facing outward and the monitor in the breathing zone throughout the task.
Velcro inner lining: Wraps and fastens at any circumference. No sizing required. The same armband adjusts between a wrist, forearm, and upper arm position on the same wearer.
Built-in Klick Fast dock: Rated for 50,000+ uses. Accepts all Peter Jones Klick Fast connectors, Go, Standard, and Ultra-Lock.
Nylon keeper: Retains excess strap material after wrapping. Prevents loose ends from catching on tools, machinery, or work surfaces.
Cordura outer facing: Abrasion-resistant material on the outer surface handles contact with rough surfaces, equipment, and site materials without degrading quickly.
Three wear positions: Upper arm keeps the monitor close to the breathing zone. Forearm keeps it visible and easy to read. Wrist suits confined space tasks where chest and arm mounting is impractical.
Lightweight construction: 0.065kg. Adds nothing noticeable to the arm across a full shift.
Trades and roles:
Construction operatives
Site safety officers
Health and safety managers
Woodworking and joinery operatives
Lone workers
Industries:
Construction
Civil engineering
Woodworking and joinery
Metalworking and fabrication
Manufacturing
| Specification | Detail |
| Product Name | Klick Fast Armband for Dustlight Mini - Black |
| SKU | PPRE0002 |
| Dock Type | Klick Fast Dock, guaranteed 50,000+ uses |
| Compatible Devices | All devices fitted with Peter Jones Klick Fast connectors, including Dustlight Mini |
| Connector Included | No. Device must have a Klick Fast connector fitted separately. |
| Wear Positions | Upper arm, forearm, or wrist |
| Inner Lining | Velcro with non-slip textured surface |
| Fastening | Velcro wrap, adjustable to any arm circumference |
| Excess Strap Retention | Nylon keeper |
| Materials | Peter Jones Nylon, Cordura, Elastic, Nylon, Leather |
| Colour | Black |
| Dimensions | 160mm (W) x 40mm (D) x 90mm (H) |
| Weight | 0.065kg |
| Application or condition | Status |
| Dustlight Mini (with Klick Fast connector fitted) | ✓ Compatible |
| All Peter Jones Klick Fast connectors (Go, Standard, Ultra-Lock) | ✓ Compatible |
| Body-worn cameras with Klick Fast connectors | ✓ Compatible |
| Gas detectors and lone worker alarms with Klick Fast connectors | ✓ Compatible |
| Worn over work shirts, base layers, and light outerwear | ✓ Compatible |
| Upper arm, forearm, and wrist positions | ✓ Compatible |
| Devices without a Peter Jones Klick Fast connector fitted | ✗ Not compatible |
| Klick Fast LT connector system | ✗ Not compatible |
The armband is used by construction operatives and site safety officers who need the Dustlight Mini worn on the arm during dusty tasks. It suits workers who find a chest harness restrictive in confined spaces or during tasks requiring full upper body movement. It is also used across manufacturing, metalworking, and woodworking environments where gas detectors, lone worker alarms, and other Klick Fast-enabled safety devices need to be worn on the arm throughout a shift.
Wearing the Dustlight Mini on the upper arm during cutting, grinding, or breaking tasks on a construction site, positioning the monitor at breathing zone height throughout the exposure period.
Arm-worn dust monitoring in woodworking and joinery environments where bench work or machinery operation makes a chest harness impractical.
Forearm carry during site inspections and walkarounds, keeping the Dustlight Mini visible and readable without docking or undocking the device.
Wrist-worn deployment during confined space entry or work in restricted access areas where a chest harness or larger mounting is not suitable.
Carrying a lone worker alarm or personal safety monitor on the arm during isolated site tasks, keeping the device accessible without requiring a free hand.
Gas detector carry on the forearm during maintenance and inspection work in plant rooms, tunnels, and utility environments.
Step 1: Confirm the Dustlight Mini has a Peter Jones Klick Fast connector fitted. The dock accepts only devices with a connector. A Go Connector or Standard Connector must be fitted first.
Step 2: Choose the wear position. Upper arm positions the monitor closest to the breathing zone. Forearm keeps it visible for frequent reading. Wrist suits confined space tasks.
Step 3: Place the armband against the chosen position with the dock facing outward and the non-slip textured surface against the sleeve or skin.
Step 4: Wrap the Velcro lining around the arm and press to fasten. Adjust snugness so the band sits firm without restricting circulation.
Step 5: Feed any excess strap through the nylon keeper to secure it.
Step 6: Slide the Dustlight Mini's Klick Fast connector into the dock until it locks. Rotate to the preferred reading angle.
Not fitting a Klick Fast connector to the Dustlight Mini before use: The dock accepts a connector, not the bare device. This is the most common cause of the armband not functioning as expected.
Leaving excess strap unfastened: Loose strap material catches on tools, machinery, and work surfaces. Always feed excess through the nylon keeper after wrapping.
Wearing with the dock facing inward: The dock must face outward for the device to sit in the breathing zone. Check orientation before starting the task.
Wrapping too loose over a smooth sleeve: The non-slip surface needs firm contact with the garment to grip effectively. A loose wrap over a smooth material will allow the band to slide.
The armband is a device-carrying accessory only. It provides no mechanical, cut, or impact protection to the arm. Do not use as a substitute for arm PPE where protective sleeves or forearm guards are required. Inspect the Velcro fastening and dock before each use. If the Velcro has lost significant grip or the dock shows cracking or deformation, replace the armband before use.
Wipe the dock and Cordura outer surface with a damp cloth after use. The Velcro inner lining collects site dust, lint, and fibres that reduce grip over time. Clear it regularly with a stiff brush, or press and peel clean tape against the Velcro surface to pull debris free. Store away from direct heat and solvents. Replace if the Velcro fastening no longer holds securely at the chosen wear position.
Q: Does the armband include a Klick Fast connector for the Dustlight Mini?
A: No. The armband provides the Klick Fast dock. The Dustlight Mini requires a separate Klick Fast connector fitted to the device before it can be docked. The Go Connector (PP190001) is the recommended option for construction and site use where quick access to the monitor is needed throughout the shift.
Q: Which wear position should I use?
A: Upper arm positions the monitor closest to the breathing zone, which is the recommended location for dust exposure readings taken at source. Forearm keeps the device at eye level and easy to read during walkabouts or inspections. Wrist is best for confined space entry or tasks in restricted access areas where upper arm and chest mounting is not practical. All three positions use the same armband.
Q: What is this armband NOT suitable for?
A: It is not arm PPE and provides no protection against cuts, impact, heat, or abrasion. Do not use as a substitute for protective sleeves or forearm guards in tasks that require them. It is also not compatible with the Klick Fast LT connector system, which is a separate lighter-duty range from Peter Jones. Devices without a Peter Jones Klick Fast connector cannot be docked.
Q: How does the non-slip surface work over work shirts and base layers?
A: The textured inner surface creates friction against the weave of sleeve fabric. Combined with the Velcro wrap, which fastens at any circumference without relying solely on elastication, the band holds position during bending, reaching, and lifting without needing to be repositioned mid-shift. It works on most standard work shirt and base layer materials. Very smooth fabrics, such as polished cotton or satin weaves, provide less grip.
Q: Is the armband one size or does it come in different sizes?
A: One size. The Velcro inner lining fastens at any point around the arm, so the same armband adjusts to different wrist, forearm, and upper arm circumferences without separate sizing. The nylon keeper retains any excess strap length after wrapping.
Q: When should I use the black version rather than hi-vis orange or yellow?
A: Black suits indoor environments, manufacturing settings, and sites where hi-vis is not a requirement for the arm specifically. Hi-vis orange and yellow are intended for outdoor construction and highways environments where the armband needs to be visible from a distance, or where site hi-vis rules apply to all worn items. Both perform identically as device mounts.
Q: How do I keep the Velcro lining gripping properly on site?
A: Site dust and fibres collect on the Velcro loops and reduce grip over time. Clear the lining after every few shifts using a stiff brush or by pressing and peeling clean tape across the surface to lift debris free. A well-maintained Velcro fastening holds significantly better than a clogged one.
