Self-extending bungee tool lanyard reaching up to 2.1m for securing tools and equipment at height, rated to 5kg for bag work, reach tasks, and rotating tool applications.
- Dual 360-degree Quick Clip connectors, thumb-bar pull
- glove-compatible, anti-tangle rotation
- NS 9611:2022+AC certified, CE and UKCA marked
- dynamic load tested at 2:1 safety factor
- Contrast wear indicators give early warning of structural damage before failure
- Reduced bungee tension for precision control and comfortable all-day handling
- High-strength wear-resistant bungee webbing with contrast stitching
- Extends from 100cm to 210cm, 5kg (11lbs) max load
- NLG ID compatible
NLG Extended Bungee Tool Lanyard 2m - 5kg Dropped Object Prevention
Self-extending bungee tool lanyard reaching up to 2.1m for securing tools and equipment at height, rated to 5kg for bag work, reach tasks, and rotating tool applications.
- Dual 360-degree Quick Clip connectors, thumb-bar pull
- glove-compatible, anti-tangle rotation
- NS 9611:2022+AC certified, CE and UKCA marked
- dynamic load tested at 2:1 safety factor
- Contrast wear indicators give early warning of structural damage before failure
- Reduced bungee tension for precision control and comfortable all-day handling
- High-strength wear-resistant bungee webbing with contrast stitching
- Extends from 100cm to 210cm, 5kg (11lbs) max load
- NLG ID compatible
- Buy 20 for £34.40 £28.67 each and save 7%
- Buy 50 for £32.28 £26.90 each and save 13%
| BULK DISCOUNT | 20 | 50 |
|---|---|---|
| Price | £28.67 £34.40 | £26.90 £32.28 |
Order 1x to earn 30 FASTPoints
Order to earn 30 FASTPoints
Log in to access trade discountsNLG Extended Bungee Tool Lanyard 2m
Extended bungee tool lanyards at 2m allow tools and equipment to travel with the operative during height work without constant tension or restricted movement, retracting automatically when the tool returns to the carry position. The NLG Extended Bungee Tool Lanyard reaches from 100cm to 210cm, uses dual 360-degree Quick Clip connectors for glove-compatible attachment to tools that rotate during use, such as screwdrivers, spanners, and ratchets, and incorporates contrast wear indicators that signal structural degradation before any visible sheath damage appears. Certified to NS 9611:2022+AC with CE and UKCA marking, it is designed for bag work, reach tasks, and extended tool tethering programmes on construction, maintenance, and industrial sites.
How contrast wear indicators protect against undetected structural failure
A bungee lanyard that has suffered internal structural damage from repeated loading cycles may look entirely serviceable on external inspection while the elastic core has already begun to degrade — the outer sheath shows no visible change until the lanyard is approaching the point of failure. Without any reliable early warning, inspection teams pass damaged lanyards as fit for use, and operatives return them to service at height carrying a load capacity that no longer reflects the rated specification. The contrast wear indicators on this lanyard are woven into the construction to become visible as the sheath wears or the internal structure is subjected to loading beyond normal cycling, providing a signal before degradation reaches the point of failure — a safety function that no standard bungee lanyard provides.
Key Features
-
Dual 360-degree Quick Clip connectors: Both connectors rotate through 360 degrees on their swivels, preventing line twist when the tool rotates during use. Thumb-bar pull opens and locks with one hand, with or without gloves. Designed specifically for screwdrivers, spanners, socket drivers, and ratchets where a fixed connector would twist and bind as the tool cycles.
-
Contrast wear indicators: Structural markers woven into the lanyard construction that become visible as the bungee sheath wears or the internal structure is subjected to repeated load events. A change in the wear indicator zones signals that the lanyard should be assessed before returning to service. No equivalent early warning exists on a standard bungee lanyard.
-
Reduced bungee tension: Lower tension keeps the lanyard from constantly pulling the tool back toward the anchor during precision work. For tasks involving controlled, repeated tool movement across a 2m working range, reduced tension is noticeably more comfortable and less fatiguing than a high-tension bungee across a full shift.
-
Extends from 100cm to 210cm: Full 2.1m reach when extended. Stores compactly when retracted. Suited to bag work, reach tasks from a scaffold platform, and any application where a fixed-length lanyard is too short or too restrictive.
-
High-strength wear-resistant webbing: Construction resists abrasion and UV exposure conditions that shortened earlier bungee lanyard generations. Contrast stitching provides the daily inspection reference alongside the wear indicator zones.
-
NS 9611:2022+AC certification and NLG ID: Dynamically load tested at a 2:1 safety factor with third-party laboratory certification. Each lanyard carries a unique serial number and is NLG ID compatible for formal inspection record-keeping.
Who is this for
Trades and roles:
-
Rope access technicians
-
Scaffolders
-
Electricians and instrumentation engineers
-
Maintenance engineers on elevated plant and structures
-
MEWP operators
-
Height safety operatives using NLG bag systems
Industries:
-
Construction
-
Oil, gas, and petrochemical
-
Telecoms and broadcast infrastructure
-
Industrial maintenance and manufacturing
-
Utilities and infrastructure
-
Facilities management
Specifications
| Specification | Detail |
|---|---|
| Product Name | NLG Extended Bungee Tool Lanyard 2m - 5kg Dropped Object Prevention |
| SKU | NLG101434 |
| Lanyard Type | Self-extending bungee tool lanyard |
| Max Load | 5kg (11lbs) |
| Length Range | Extends from 100cm to 210cm |
| Connector Type | Dual 360-degree Quick Clip, thumb-bar pull, anti-tangle swivel |
| Bungee Construction | High-strength wear-resistant bungee webbing |
| Bungee Tension | Reduced tension for precision control and comfortable handling |
| Load Testing | Dynamic, 2:1 safety factor, third-party certified |
| Safety Standard | NS 9611:2022+AC |
| Compliance Marking | CE and UKCA |
| Wear Indicators | Contrast wear indicators, early warning of structural damage |
| Serialisation | Unique serial number, NLG ID compatible |
Compatibility
| Application or Condition | Status |
|---|---|
| Hand tools up to rated maximum load | Compatible |
| Rotating tools: screwdrivers, spanners, ratchets, socket drivers | Compatible |
| NLG height safety bag anchor points | Compatible |
| Scaffold, MEWP basket, and harness anchor attachment | Compatible |
| Reach tasks up to 2.1m working distance | Compatible |
| Operation with standard site work gloves | Compatible |
| Tools exceeding rated maximum load | Not recommended |
| Personal fall arrest, restraint, or work positioning | Not recommended |
| Attachment to unrated tool points: cables, grips, handles | Not recommended |
| Use when wear indicators show visible change or degradation | Not recommended |
| Reuse after a drop arrest event without formal inspection | Not recommended |
Who is this for
The NLG Extended Bungee Tool Lanyard is used by rope access technicians, electricians, maintenance engineers, scaffolders, and site operatives who need up to 2.1m of tethered reach during height work, particularly when working from NLG bag systems, reaching across a scaffold platform, or handling tools that must rotate freely during use. The 360-degree Quick Clip connectors make this the appropriate choice for any operative using screwdrivers, socket sets, spanners, and ratchets at height, where a fixed connector would bind and compromise tool control. The reduced bungee tension and 2.1m extension range suit applications where the tool needs to be fully extended from the operative's body to reach a difficult location, without the lanyard going taut and restricting movement.
Typical applications
-
Attaching a cordless screwdriver or impact driver to a harness or bag anchor where the tool must rotate during use without the lanyard twisting and binding.
-
Tethering spanners, ratchets, and socket drivers to a scaffold or harness anchor during structural installation and bolting work at height, where the tool is passed between hands and rotated repeatedly.
-
Connecting tools to NLG bag anchor points during bag-based working at height, allowing tools to be drawn up to 2.1m from the bag to the working position and returned without removing the tether.
-
Securing electrical testing and measuring instruments to a body anchor during installation work at height where the instrument must be extended to reach panel positions some distance from the operative.
-
Providing extended-reach tethering from a MEWP basket anchor where the operative needs to reach equipment positioned further than a fixed-length lanyard would allow.
-
Tethering torque wrenches to a harness anchor during structural mechanical maintenance where precise tool control is essential and excess bungee tension would interfere with torque accuracy.
-
Attaching hand saws, hacksaws, and cutting tools to a harness anchor during overhead cutting work at height, where the 360-degree swivel prevents the lanyard twisting as the cutting motion cycles.
-
Securing tape measures, laser levels, and survey instruments to a belt anchor during elevated setting-out work where the instrument travels with the operative across a working range.
How to use
Step 1: Inspect before every use. Check the bungee construction for cuts, abrasion damage, or any visible change to the contrast wear indicators. If wear indicators show a colour change or the indicator zones look different from when the lanyard was new, retire immediately without returning to service.
Step 2: Check both Quick Clip connectors for deformation or failure to lock. Retire the lanyard if any defect is found.
Step 3: Confirm both anchor points carry appropriate load ratings. The tool must have a purpose-built tether loop or rated D-ring. Never attach to a power cable, trigger guard, or moulded grip.
Step 4: Rotate the Quick Clip 90 degrees to swivel. Pull the thumb bar to open the clip jaw. Attach to the anchor point and release. The connector locks automatically on release.
Step 5: Attach the second connector to the tool's rated tether point. Tug both ends to confirm full engagement before beginning work.
Step 6: Extend the lanyard through its full range once to confirm it moves freely from 100cm to 210cm without restriction or unusual stiffness before starting the task.
Step 7: After use, allow the bungee to retract fully, inspect for wear, and store away from sunlight, heat, and chemicals.
Common mistakes
-
Using the lanyard with tools that exceed the 5kg maximum load: the rated capacity applies to the dynamic drop event. For heavier tools, select the NLG Heavy Duty Bungee range.
-
Ignoring a change to the contrast wear indicators: visible degradation in the wear indicator zones is not cosmetic. It signals that the structural integrity of the lanyard may be compromised and the lanyard must be retired immediately.
-
Storing the lanyard under extension: leaving the bungee stretched during storage compresses the elastic core over time and reduces retraction performance. Always allow full retraction before storing.
-
Failing to check extension and retraction before starting work: stiffness or resistance through the bungee range is an early sign of internal damage. Check extension before every use.
-
Continuing to use after a drop event: remove from service and arrange a formal inspection by a competent person before any further use, regardless of visual appearance.
Safety
Certified to NS 9611:2022+AC with a 2:1 dynamic safety factor. Maximum load is 5kg (11lbs). This is a tool retention lanyard only. It must not be used as a personal fall arrest system, fall restraint, or work positioning device. The contrast wear indicators must be checked before every use. Visible change to any wear indicator zone means the lanyard must be retired from service immediately. After any drop arrest event, remove from service for formal inspection.
Maintenance
Allow the bungee to retract fully after use and wipe down with a damp cloth after exposure to dust, oil, or salt spray. Air dry away from direct heat. Do not expose to solvents, acids, or bleach, and do not immerse in chemical solutions. Store fully retracted, away from UV exposure and heat sources. Before every shift, inspect the bungee extension and retraction for unusual stiffness or restriction, check the wear indicator zones for any visible change, and confirm both Quick Clips open, lock, and rotate freely. Record formal inspections against the serial number at intervals appropriate to frequency of use and site conditions.
Frequently Asked Questions
Q: What tools is the Extended Bungee Tool Lanyard specifically designed for?
A: The 360-degree Quick Clip connectors make this lanyard the right choice for tools that rotate during use: screwdrivers, spanners, socket drivers, ratchets, and any hand tool that cycles rotationally during a task. A fixed connector would twist and bind as the tool spins, whereas the 360-degree swivel allows the tool to rotate freely without transmitting any twist to the lanyard or the anchor point. It is also suited to bag-work applications where tools need to travel up to 2.1m from a bag anchor to the working position.
Q: What does NS 9611:2022+AC certification mean in practice?
A: NS 9611 is the Norwegian Standard for equipment designed to prevent objects from falling during work at height, setting test methods and performance requirements for tool tethering and dropped object prevention products as a distinct category from personal fall arrest standards. This lanyard has been dynamically load tested at a 2:1 safety factor by an independent third-party laboratory, meaning it withstands twice its rated load under a simulated drop event. CE and UKCA marking confirms UK compliance. A full Declaration of Conformity is available on request from NLG.
Q: What is this lanyard not suitable for?
A: This is a tool retention lanyard only and must not be used as a personal fall arrest system, fall restraint, or work positioning device. It is not rated for tools exceeding 5kg, and it must not be attached to unrated anchor points such as power cables, trigger guards, or moulded handles. It must be retired from service immediately if the contrast wear indicators show any visible change, and it must not be returned to use after a drop arrest event without formal inspection by a competent person.
Q: What are the contrast wear indicators and how do I use them?
A: The contrast wear indicators are structural markers woven into the lanyard construction that become visible as the bungee sheath wears or the internal structure is subjected to loading beyond normal cycling. Before every use, compare the indicator zones to how the lanyard looked when new. Any visible colour change, disruption to the pattern, or degradation in those zones means the lanyard should be assessed and likely retired before returning to service. No standard bungee lanyard provides an equivalent early warning, this is a feature specific to this model and one of the primary reasons to specify it over an uncertified alternative.
Q: What is the practical difference between this and the standard NLG Bungee Tool Lanyard?
A: The standard NLG Bungee Lanyard extends from 80cm to 120cm and uses an aluminium carabiner connector. This Extended version reaches from 100cm to 210cm, uses 360-degree Quick Clip connectors at both ends, has reduced bungee tension for precision control, and includes contrast wear indicators. The Quick Clips make it better suited to rotating tool applications and bag-work where repeated single-handed connection and disconnection is more practical than a carabiner. The extended reach suits tasks where 120cm is not enough working distance.
Q: Can I use this lanyard with an NLG height safety bag?
A: Yes. NLG's bag range, including the Ascent Bucket and compatible height safety bags, features rated internal anchor points designed for use with this lanyard. With the 2.1m reach, tools can be drawn from the bag to a working position and returned without removing the tether. Both Quick Clip connectors are compatible with NLG bag anchor systems, harness D-rings, and standard belt anchor points.
Q: When should this lanyard be taken out of service?
A: Retire the lanyard if the contrast wear indicators show any visible change. Retire if the bungee shows cuts, thinning, abrasion damage, or unusual stiffness when extending through its range. Retire if either Quick Clip fails to open, lock, or rotate freely. After any dynamic drop arrest event, remove from service and arrange a formal inspection by a competent person before any further use, regardless of how the lanyard appears visually.
