Extended coil tool lanyard rated to 3kg, reaching 2 metres (14cm to 210cm) for tethering hand tools in overhead and extended working positions.
- Max load 3kg (6.6lbs), dynamic load tested at 2:1 safety factor
- CE and UKCA marked, NS 9611:2022 compliant
- serial numbered
- Dual Quick Clip connectors, 360° anti-tangle
- thumb bar operated with gloves
- Extends 14cm to 210cm, low recoil force for all-day comfort
- Anti-puncture wipe-clean PU core
- Pairs with NLG Tool Holster NLG101470
- NLG ID scan tag included
NLG Extended Coil Tool Lanyard - 3kg 2 Metre Reach Tool Tethering
Extended coil tool lanyard rated to 3kg, reaching 2 metres (14cm to 210cm) for tethering hand tools in overhead and extended working positions.
- Max load 3kg (6.6lbs), dynamic load tested at 2:1 safety factor
- CE and UKCA marked, NS 9611:2022 compliant
- serial numbered
- Dual Quick Clip connectors, 360° anti-tangle
- thumb bar operated with gloves
- Extends 14cm to 210cm, low recoil force for all-day comfort
- Anti-puncture wipe-clean PU core
- Pairs with NLG Tool Holster NLG101470
- NLG ID scan tag included
- Buy 20 for £21.84 £18.20 each and save 9%
- Buy 50 for £20.28 £16.90 each and save 15%
| BULK DISCOUNT | 20 | 50 |
|---|---|---|
| Price | £18.20 £21.84 | £16.90 £20.28 |
Order 1x to earn 19 FASTPoints
Order to earn 19 FASTPoints
Log in to access trade discountsNLG Extended Coil Tool Lanyard
Extended coil tool lanyard rated to 3kg, extending from 14cm to 210cm for hand tool tethering where a standard coil length runs short. The dual Quick Clip connectors open with a thumb bar pull and lock automatically on release, operable with gloves on, and rotate through a full 360° to prevent the coil from winding as the tool is used. Low recoil force at full stretch means the coil extends to 2 metres without creating tension on the grip, making it practical for overhead installation, extended access work, and any task that takes the operative to the edge of standard coil reach.
Why 2 Metres of Reach Changes What You Can Tether From One Position
A standard coil lanyard extending to 170cm limits the tethering radius to within arm's reach of the anchor. For overhead installation, reaching into a deep access position, or working at the full extent of a scaffold bay, that standard length either runs out before full reach or creates constant tension on the last 20 to 30cm. Operatives working at the edge of a standard coil's extension feel that pull-back tension throughout the task, it affects grip, concentration, and the willingness to keep the lanyard attached when it inconveniences the work. At 210cm, the extended coil covers full arm's reach from a belt or harness anchor in overhead and extended working positions, leaving a margin that means the operative is never working at the limit of the tether.
Key Features
-
Extends 14cm to 210cm: Two metres of working reach covers overhead access work, deep service positions, and any task where a standard 170cm coil reaches its practical limit. The coil retracts to a compact profile when not in use.
-
Low recoil force at full extension: The coil exerts minimal pull-back tension even at full 2 metre extension, making it comfortable for long tasks where a stiffer coil would create grip fatigue and encourage non-compliance.
-
Dual 360° Quick Clip connectors: Thumb bar opens the gate in one motion and auto-close locks on release. Both connectors rotate freely through 360°, eliminating coil tension when rotating tools such as screwdrivers and scaffold spanners are in use. Operable with construction gloves throughout.
-
Compact coil design: Retracts neatly without trailing or bunching when not extended. The compact profile reduces snagging hazards on scaffold fittings and plant equipment during movement.
-
Anti-puncture wipe-clean PU core: Lightweight and durable. Resists puncture from tool contact and surface abrasion. Wipes clean in dirty or greasy environments.
-
Pairs with NLG Tool Holster 101470: The extended coil connecting from a Tool Holster on the belt to the tool creates a hands-free tethering system that keeps the tool accessible without occupying a D-ring on the harness.
Who Is This For
Trades and roles:
-
Site operatives working at extended reach or overhead positions
-
Electricians and M and E trades on elevated cable and containment installation
-
Scaffold operatives needing more reach than a standard coil allows
-
Safety officers specifying for longer-reach task requirements
Industries:
-
Construction and building
-
Electrical and M and E
-
Utilities and industrial maintenance
-
Rail and infrastructure
Specifications
| Specification | Detail |
|---|---|
| Product Name | NLG Extended Coil Tool Lanyard - 3kg 2 Metre Reach Tool Tethering |
| SKU | NLG101476 |
| Product Category | Extended Coil Tool Lanyard, Dropped Object Prevention |
| Max Load | 3kg (6.6lbs) |
| Lanyard Type | Extended coil |
| Core Material | Lightweight PU |
| Connector Type | Dual Quick Clip, thumb bar action, 360° swivel |
| Gate Mechanism | Pull thumb bar to open, auto-closes and locks on release |
| Anti-Tangle | Yes, 360° swivel at both ends eliminates coil tension |
| Recoil Force | Low, comfortable at full 2 metre extension |
| Sleeve | Anti-puncture wipe-clean PU |
| Pairs With | NLG Tool Holster NLG101470 |
| Safety Standards | CE, UKCA, NS 9611:2022+AC |
| Testing | Dynamic load tested, 2:1 safety factor, third-party certified |
| Inspection System | NLG ID serialised scan tag |
| Serial Numbering | Unique serial number per unit |
| Extended Length | 14cm to 210cm |
| Colour | Hi-vis green |
Compatibility
| Application or Condition | Status |
|---|---|
| Hand tools up to 3kg at extended reach and overhead positions | ✓ Compatible |
| Screwdrivers, spanners, and rotating hand tools | ✓ Compatible |
| Overhead installation and extended access work | ✓ Compatible |
| Dirty, greasy, and harsh site environments | ✓ Compatible |
| Use with NLG Tool Holster NLG101470 for belt-worn system | ✓ Compatible |
| Tools exceeding 3kg (6.6lbs) | ✗ Not suitable |
| Non-conductive or metal-free required environments | ✗ Not suitable |
| Fall arrest or personal safety applications | ✗ Not suitable |
| Replacement for EN354 or EN355 personal safety lanyard | ✗ Not suitable |
Who Is This For
Site operatives, electricians, and M and E maintenance engineers who need to tether hand tools at extended reach, overhead cable installation, service riser work, deep access positions, and any task where a standard 170cm coil reaches its practical limit before the operative reaches theirs. It is equally suited to safety officers and procurement teams specifying a complete tethering kit alongside the NLG Tool Holster NLG101470, and to construction and scaffold sites where operatives frequently work at the full extent of a scaffold bay or elevated platform.
Typical Applications
-
Tethering a screwdriver or ratchet during overhead electrical installation where the operative reaches above shoulder height and a standard coil runs out before full arm extension.
-
Securing scaffold spanners and wrenches during structural steelwork and bolting operations where the operative works at varying distances from the belt anchor throughout the task.
-
Keeping pliers, cutters, and M and E hand tools connected to a belt anchor during elevated cable containment work where the tool must reach into deep service positions.
-
Use with the NLG Tool Holster NLG101470 clipped to a belt, with this extended coil connecting the holster anchor to the tool for a complete hands-free tethering setup that keeps the D-ring free for other equipment.
-
Tethering tools on scaffolding and elevated access platforms where the operative works across a large bay and needs more than a standard coil's reach to cover the full working area.
-
Part of a multi-tool tethering programme on construction sites where different operatives carry different tools, and the extended coil covers the general hand tool range for operatives working in overhead or extended positions.
How to Use
Step 1: Rotate the Quick Clip 90 degrees to align the swivel for connection.
Step 2: Pull the thumb bar to open the clip. Clip to the anchor point, Tool Holster loop, harness D-ring, or belt anchor. Release the thumb bar. Gate closes and locks automatically.
Step 3: Confirm the anchor connection is locked with a tug.
Step 4: Rotate the second Quick Clip 90 degrees. Pull the thumb bar. Clip to the tool D-ring or attachment point. Release and confirm locked.
Step 5: Check both ends with a firm tug before beginning work.
Common Mistakes
-
Exceeding the 3kg max load: Weigh the tool fully assembled before attaching. For tools above 3kg, use the NLG 5kg bungee lanyard.
-
Routing the coil through narrow gaps: At full extension, 210cm of coil must have a clear path between anchor and tool. Routing through scaffold rails, hatches, or tight gaps where the coil can catch or compress will reduce effective reach and create a snag hazard.
-
Not checking both Quick Clips: Both connectors must be confirmed locked after every clip. Confirm the gate is closed and immovable with a firm tug at both ends before starting work.
-
Using in non-conductive environments: The Quick Clip connectors are metal. This lanyard is not suitable for electrical work or metal-free environments, use the non-conductive coil lanyard (NLG101376) for those applications.
-
Continuing after a drop event: Quarantine and inspect after any drop before returning to service.
Safety
This lanyard is rated to a maximum working load of 3kg (6.6lbs). It is not for fall arrest and must not be used in any personal safety application. The metal Quick Clip connectors are not suitable for non-conductive or metal-free environments. Inspect the coil, sleeve, and both Quick Clip connectors before every use. Retire from service if any component shows wear, deformation, or damage. Quarantine after any drop event pending a full inspection.
Maintenance
Wipe the PU sleeve clean with a damp cloth after use in dirty or greasy environments. Inspect both Quick Clip connectors for deformation and confirm each thumb bar opens the gate cleanly and the gate auto-closes and locks on release. Check the coil body along its full length for kinking or surface damage. Store away from direct sunlight and chemical contact. Log inspections via the NLG ID scan tag. Retire when any component shows deterioration.
Frequently Asked Questions
Q: Why would I choose this over the standard NLG Coil Tool Lanyard?
A: The standard coil lanyard (NLG101370) extends to 170cm with an aircraft-grade cable core and Rotobiner connectors, the right choice for demanding industrial environments where core durability is the priority. This extended coil reaches 210cm with a PU core and Quick Clip connectors, the right choice when the 40cm of additional reach matters more than the premium cable core. If your task regularly takes you to the end of a standard coil's extension, the extended version gives you working margin. If you work in oil and gas or extreme industrial conditions, the aircraft-grade cable of the standard version is the better specification.
Q: What tools can I tether at 2 metres of reach?
A: Any hand tool or light power tool weighing 3kg or less with a D-ring, captive hole, or attachment point for the Quick Clip. The 210cm extension suits screwdrivers, spanners, pliers, wrenches, and similar hand tools used in overhead or extended-reach working positions. Weigh the tool fully assembled, including batteries and accessories, before attaching.
Q: How does the low recoil force help on longer tasks?
A: A coil under high recoil tension pulls back against the tool at full extension, creating a continuous opposing force that the operative works against throughout the task. Over an extended shift of overhead or full-reach work, that pull-back adds measurable fatigue to the grip and wrist. The extended coil is specifically designed with low recoil force, meaning the coil extends to 2 metres with minimal spring-back tension, so the operative works at full stretch without fighting the lanyard.
Q: How does this pair with the NLG Tool Holster 101470?
A: The Tool Holster clips to a belt D-ring and provides a secure storage pocket for the tool alongside an anchor loop for the Quick Clip. Clip one end of the extended coil to the holster anchor loop, clip the other end to the tool D-ring, and the tool can be stored in the holster or used at up to 2 metres of reach, all without occupying a harness D-ring. This is the setup NLG specifically recommends for this lanyard and it keeps the tool close to hand while keeping the operative's harness D-rings clear.
Q: What is this NOT suitable for?
A: Tools exceeding 3kg (6.6lbs). Non-conductive or metal-free environments,the Quick Clips are metal construction. Fall arrest or any personal safety application. Do not route the coil through gaps that compress it at full extension. For tool weights above 3kg, use the NLG 5kg bungee lanyard.
Q: How do I inspect this lanyard before use?
A: Check both Quick Clip connectors for deformation and confirm each thumb bar opens cleanly and the gate auto-closes and locks on release. Tug both closed clips firmly. Check the coil body along its full length for kinking and surface damage. Inspect the PU sleeve for punctures or splits. Retire from service if any component fails the check. Log the inspection via the NLG ID scan tag.
Q: What certifications does this carry?
A: CE and UKCA marking, and NS 9611:2022+AC compliance. Dynamically load tested at a 2:1 safety factor by an independent third-party laboratory. Each unit carries a unique serial number and NLG ID scan tag for inspection traceability.
Q: How quickly can I get these to site?
A: Order by 7pm for next-day delivery nationwide. CMT Group operates its own fleet covering more than 95% of the UK mainland with live tracking and What3Words integration for delivery to a specific site gate or compound. VIP same-day delivery from a CMT depot is available for urgent requirements.
