Skytec Polyester Flat Nitrile Palm Coated Gloves - Lint Free Assembly and General Handling

 Specifications

Size Guide

Compatibility

Who is this for?

The Skytec EMG211 is specified by production managers, quality managers, SHEQ advisors, and procurement teams in automotive, construction, plastics manufacturing, and general assembly environments where lint contamination of components or products is a quality concern alongside the need for oil resistance and mechanical protection. The lint-free polyester construction makes it the correct choice for any assembly or handling task where standard cotton-lined gloves would shed fibres onto components, machinery, or finished products. Available in sizes 9 and 10, supplied in packs of 10 pairs.

Typical applications

• Component and product assembly in automotive and manufacturing facilities where lint contamination of parts is a quality control requirement

• Automotive parts handling and examination tasks requiring oil resistance and a close, lint-free fit

• Plastics manufacturing and injection moulding environments where lint on components or tooling causes surface defects or quality failures

• Machinery and plant operation requiring sustained abrasion protection and oil resistance across a full production shift

• General maintenance tasks in automotive and construction environments involving oily components, tools, and mixed material contact

• Examination and inspection tasks where a close-fitting, lint-free glove allows accurate surface and component assessment

How to use

1. Select the correct size. Size 9 (L) corresponds to approximately 229 mm palm circumference, size 10 (XL) to approximately 254 mm.

2. Inspect the glove before each use. Check for holes, coating separation, or tears. Discard any damaged pair.

3. Don the glove ensuring the elasticated knit wrist seats securely at the wrist.

4. Use for assembly, automotive, construction, and general handling tasks in dry to moderately damp conditions.

5. The flat nitrile coating provides oil and water resistance for incidental contact. Do not use in heavily oily or submerged conditions.

6. Do not use near rotating machinery. Entanglement hazard.

7. Remove by easing left and right gloves off alternately where surface contamination is present.

8. Wash hands thoroughly before donning and after removing gloves.

Safety

• CE Cat II, EN 388:2016 + A1:2018 score 4121A. Level 4 abrasion resistance. Not rated for heat, cut beyond Level 1, chemical protection, or electrical hazards.

• Do not use near rotating machinery. Entanglement hazard.

• The flat nitrile coating is suitable for incidental oil and water contact. For heavily oily or wet conditions, a fully coated nitrile glove is required.

• If a skin reaction occurs during use, remove immediately and seek medical advice.

• Use within 3 years of manufacture. Store between 10°C and 30°C in original packaging away from direct light.

Maintenance

Wipe clean with a damp cloth between uses. Machine washing is not recommended as it may degrade the flat nitrile coating and alter certified performance levels. Allow to dry naturally before storing. Store in dry conditions between 10°C and 30°C in original packaging away from direct sunlight. Do not exceed 40°C in storage. Inspect before each use and discard if coating separation, cracking, or surface damage is present.

Frequently Asked Questions

Q: What does lint-free mean and why does it matter in assembly environments?

 A: A lint-free glove uses a polyester liner that produces no loose fibres during wear. Standard cotton-lined gloves shed microscopic fibres continuously during handling, which can contaminate components, optical surfaces, electronic assemblies, and painted or polished parts. In automotive, plastics, and precision assembly environments, lint contamination causes surface defects, quality failures, and rework costs. The EMG211's polyester construction eliminates this risk at glove level.

Q: What is the difference between flat nitrile and foamed nitrile coating?

 A: Flat nitrile produces a smooth, dense coating surface that sits closely against the liner. Foamed nitrile has a micro-textured, sponge-like surface that provides enhanced grip on dry surfaces but adds more bulk at the fingertips. For assembly and inspection tasks where close fit and tactile sensitivity are the priority, flat nitrile is the correct specification. For rough surface handling where grip is the priority, foamed nitrile is typically preferred.

Q: What does the EN 388:2016 + A1:2018 score 4121A mean?

 A: Abrasion resistance Level 4, blade cut resistance Level 1 (Coupe test), tear resistance Level 2, puncture resistance Level 1, and A confirming the TDM straight blade cut test was carried out with a result at Level A. The "A" suffix is significant: it means the more rigorous TDM cut method was applied, providing a more reliable cut resistance rating than a Coupe-only result. The Level 4 abrasion score is the maximum achievable under the standard.

Q: What does ANSI/ISEA 105:2016 A1/5/2 mean?

 A: ANSI/ISEA 105:2016 is the US standard for hand protection. The rating A1/5/2 covers cut resistance at Level A1, puncture resistance at Level 5, and abrasion resistance at Level 2 under the US testing methodology. Dual EN and ANSI certification is relevant for multinational automotive and manufacturing buyers specifying gloves across both European and North American facilities.

Q: Is the EMG211 suitable for oily components in automotive assembly?

 A: Yes for incidental oil contact during component handling and assembly. The flat nitrile coating provides oil resistance that prevents oil penetrating to the liner during normal handling tasks. For tasks involving immersion in oil or sustained heavy oil contact, a fully coated nitrile glove provides more comprehensive protection.

Q: Why is a seamless liner important for extended wear?

 A: A seamed liner has raised stitching lines across the fingers and palm that press against the skin during sustained gripping and handling. Over a full production shift this causes localised pressure and irritation that drives operatives to remove gloves to relieve discomfort. A seamless liner has no raised seams, distributing contact evenly across the hand and significantly reducing this source of fatigue and non-compliance.

Q: Can this glove be machine washed?

 A: Machine washing is not recommended as it may degrade the flat nitrile coating and reduce the certified mechanical performance levels. Wipe clean with a damp cloth between uses. Inspect before each reuse and discard if any coating damage is present.

Q: Why buy Skytec Polyester Flat Nitrile Palm Coated Gloves from CMT Group?

 A: CMT Group is a BSIF Registered Safety Supplier and holds ISO 9001:2015, CHAS Elite, and SSIP accreditations, meaning PPE products are sourced through a verified, compliant supply chain. Most orders are despatched for same or next working day UK mainland delivery when placed by 7pm online. Packs of 10 pairs are available for single-site and individual operative issue, with case quantities of 120 pairs for framework and multi-site procurement. Volume pricing is available through CMT's EDGE procurement portal.