MAX 110V LED 360° work lights deliver 2800lm of omnidirectional cylindrical illumination eliminating shadows and blind spots for all-round site area coverage.
- 35W LED, 2800lm, 6500K
- 360° beam from cylindrical tube
- Shadow-free illumination in all directions from a single unit
- Multiple brightness modes
- IP44 outdoor and indoor rated
- 3m cable, 110V site voltage
- Lightweight at 3.15kg
MAX 110V LED 360° Work Light - 35W Cylindrical
MAX 110V LED 360° work lights deliver 2800lm of omnidirectional cylindrical illumination eliminating shadows and blind spots for all-round site area coverage.
- 35W LED, 2800lm, 6500K
- 360° beam from cylindrical tube
- Shadow-free illumination in all directions from a single unit
- Multiple brightness modes
- IP44 outdoor and indoor rated
- 3m cable, 110V site voltage
- Lightweight at 3.15kg
- Buy 5 for £95.34 £79.45 each and save 6%
- Buy 10 for £90.50 £75.42 each and save 11%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £79.45 £95.34 | £75.42 £90.50 |
Order 1x to earn 84 FASTPoints
Order to earn 84 FASTPoints
Log in to access trade discountsMAX 110V LED 360° Work Light - 35W
MAX 110V LED 360° work lights deliver 2800lm of cool white illumination equally in all directions from a cylindrical tube. No directed beam. No shadow gaps. Place it in the working area and the full surrounding space receives even light. At 3.15kg it is one of the lightest units in the MAX site lighting range.
How 360° cylindrical illumination eliminates the limitations of directional site lighting
A directional work light illuminates what it faces. Everything to the sides, behind, and above stays darker. In a room, corridor section, or enclosed area, this creates shadow zones that require repositioning or additional lights. A 360° cylindrical light emits equally in all directions from the tube. Place it in the centre of the space. The full surrounding area receives the same illumination. No repositioning. No shadow gaps. One unit.
Key Features
-
360° cylindrical beam: Light emits equally in all directions from the cylindrical tube. No beam direction to manage. No blind spots or shadow zones behind the unit.
-
2800lm, 6500K: Cool white output covering the full 360° arc. 35W for efficient high-output illumination across the surrounding area.
-
Multiple brightness modes: Press to cycle through brightness settings. Provides flexibility for close-up tasks and larger area coverage.
-
Lightweight at 3.15kg: Significantly lighter than most tripod floodlights. Easy to carry, position, and reposition throughout a shift.
-
IP44 rated: Dust and water splash protection. Suitable for outdoor site conditions and light rain as well as dusty indoor environments.
-
3m cable, 110V: Connects to a standard 110V CTE site transformer. Compact and ready to deploy.
-
MAX brand: CMT Group own brand site equipment.
Who is this for
Trades and roles:
-
Site managers
-
Site electricians
-
M&E contractors
-
Maintenance technicians
Industries:
-
Construction
-
Civil engineering
-
M&E and building services
-
Facilities management
Specifications
| Specification | Detail | |
| Product Name | MAX 110V LED 360° Work Light - 35W Cylindrical | |
| SKU | EL060001 | |
| Brand | MAX (CMT Group) | |
| Power | 35W | |
| Lumen Output | 2800lm | |
| Beam Type | 360° omnidirectional (cylindrical tube) | |
| Colour Temperature | Approx. 6500K | |
| IP Rating | IP44 | |
| Voltage | 110V, 50Hz | |
| Cable Length | 3m | |
| Brightness Modes | Multiple (press to cycle, hold 3+ seconds then press = off) | |
| Weight | Approx. 3.15kg | |
| Dimensions | 91 x 74 x 120cm | |
| Application | Indoor and outdoor | |
Compatibility
| Application or condition | Status | |
| Enclosed rooms and spaces requiring shadow-free illumination | ✓ Suitable (360° beam) | |
| Outdoor site use and light rain | ✓ Suitable (IP44) | |
| 110V CTE site supply | ✓ Suitable | |
| Indoor construction zones | ✓ Suitable | |
| Areas requiring all-round illumination from a single unit | ✓ Suitable | |
| 230V mains supply | ✗ Not suitable. 110V only via transformer. | |
| Water jets or submersion | ✗ Not suitable. IP44 covers splash only. | |
| Explosive or flammable atmospheres | ✗ Not suitable. No ATEX certification. | |
Who is this for
This light suits site managers, electricians, and contractors who need even, shadow-free illumination across the full area surrounding the light position. It is particularly suited to enclosed construction rooms where a directional floodlight would leave dark zones behind and to the sides, M&E operatives working in plant rooms where all-round visibility is needed simultaneously, and maintenance technicians who need comprehensive area lighting without repositioning as they move around the space.
Typical applications
-
Enclosed construction rooms and open-plan spaces where all-round even illumination is needed from a single unit without repositioning.
-
Plant rooms and mechanical service areas where work takes place all around the unit and directional lighting would leave the operative working in their own shadow.
-
Indoor construction zones during fit-out and second-fix phases before permanent lighting is commissioned.
-
Outdoor site areas where all-round perimeter illumination is needed from a single position.
-
Welfare facilities, site offices, and cabins requiring even area lighting without directed beam units.
-
Site walkthrough and inspection lighting where comprehensive coverage of the surrounding space is required.
-
Underground drainage and infrastructure inspection where illumination of the full surrounding space is needed.
How to use
Step 1: Position the unit in the centre of the area to be illuminated for maximum 360° coverage.
Step 2: Connect the 3m cable to a 110V CTE transformer output.
Step 3: Press the switch to activate. Press again to cycle through brightness modes.
Step 4: To switch off, leave the light in any mode for over 3 seconds, then press once.
Step 5: Disconnect from the transformer before repositioning.
Common mistakes
-
Positioning against a wall or corner. This wastes the 360° beam by directing half the output into a surface. Position centrally for maximum area coverage.
-
Connecting to 230V. This unit is 110V only via a site transformer.
-
Using in sustained heavy rain or water jets. IP44 covers splash. Avoid jet exposure or submersion.
-
Not earthing the unit. Connect via a 110V CTE site transformer only.
Safety
110V only. Must be connected via a suitable 110V transformer. Do not connect to 230V. IP44 covers splash but not water jets or submersion. Do not use in explosive or flammable atmospheres. Never look directly into the operating light source, 2800lm causes eye discomfort at close range. Ensure the light is standing securely before switching on. Disconnect before repositioning. Do not use the cable as a carrying handle.
Maintenance
Clean the housing and cylindrical lens with a dry or slightly moist, clean cloth. Do not use abrasive cleaners or solvents. Do not expose to excessive moisture, dust, or corrosive chemicals. Disconnect and allow to cool before cleaning.
Frequently Asked Questions
Q: What makes 360° illumination different from a standard directional work light?
A: A standard directional work light points its beam in one direction. Everything behind the unit, to its sides, and above remains darker. In a room or enclosed area, this creates shadow zones that require multiple lights or repositioning. A 360° cylindrical light emits equally in all directions. Place it centrally and the entire surrounding space receives even illumination from a single unit without any repositioning.
Q: Where should I position it for maximum coverage?
A: In the centre of the space to be illuminated. Positioning against a wall or corner wastes half the 360° output into the surface behind. Centrally positioned, the full 2800lm radiates outward equally in all directions.
Q: How do the brightness modes work?
A: Press the switch to activate and cycle through the available brightness modes. To switch the light off, leave it in any mode for over 3 seconds, then press the switch once.
Q: What is this NOT suitable for?
A: Not suitable for 230V supply (110V only via transformer). Not rated for water jets or submersion (IP44 splash only). No ATEX certification, not for explosive or flammable atmospheres. Do not look directly into the operating light source.
Q: Is it suitable for outdoor use?
A: IP44 rated. Protected against dust and water splash from any direction. Suitable for outdoor site conditions and light rain. Not for sustained heavy rain or submersion.
Q: How does this compare to the MAX 110V Portable LED Work Light (MAXLED10)?
A: The MAXLED10 is a 10W, 900lm directional floodlight on a tripod with a tilt-adjustable head. It illuminates where the head is pointed. This 360° cylindrical unit delivers 2800lm in all directions simultaneously. Choose the MAXLED10 when directed task lighting at a specific point is needed. Choose this unit when even all-round area illumination without shadow gaps is the priority.
Q: What transformer do I need?
A: A 110V CTE site transformer is required. This unit draws 35W. Any standard 110V site transformer with at least 35W of spare output capacity will power this unit.
Q: Is MAX a CMT Group brand?
A: Yes. MAX is CMT Group's own range of professional site equipment.
