MAX rechargeable LED spotlight work lights deliver 1100 lumens from a compact, IP44-rated unit with two brightness settings and USB-C charging.
- 1100 lumen high setting, 500 lumen low setting
- 3 hours runtime on high, 6 hours on low
- IP44 water splash protection
- ABS and rubber construction
- Fold-out stand for hands-free positioning
- USB Type-C rechargeable, cable included
- CE marked
Rechargeable LED Spot Light 1100lm
MAX rechargeable LED spotlight work lights deliver 1100 lumens from a compact, IP44-rated unit with two brightness settings and USB-C charging.
- 1100 lumen high setting, 500 lumen low setting
- 3 hours runtime on high, 6 hours on low
- IP44 water splash protection
- ABS and rubber construction
- Fold-out stand for hands-free positioning
- USB Type-C rechargeable, cable included
- CE marked
- Buy 5 for £37.56 £31.30 each and save 10%
- Buy 10 for £34.15 £28.46 each and save 18%
| BULK DISCOUNT | 5 | 10 |
|---|---|---|
| Price | £31.30 £37.56 | £28.46 £34.15 |
Order 1x to earn 34 FASTPoints
Order to earn 34 FASTPoints
Log in to access trade discountsMAX Rechargeable LED Spotlight Work Light 1100lm
MAX rechargeable LED spotlight work lights combine 1100 lumens of high-output illumination with a compact rechargeable body and IP44 water splash protection. Two brightness settings adapt the output to the task and extend battery life when full brightness is not needed. The fold-out stand holds the unit at a range of angles for hands-free site and task lighting without a 110V supply.
How two brightness settings and USB-C charging outperform a fixed-output work light
A fixed-output work light runs at maximum brightness for every task. Close-up reading and plan inspection do not need 1100 lumens. Running at full output when low would suffice drains the battery in 3 hours rather than 6. Two settings let you match the output to the task. Use 500 lumens for close work and extended shifts. Switch to 1100 lumens when the full beam is needed. USB-C means any standard phone charger keeps this unit powered.
Key Features
-
Two brightness settings: 1100 lumens on high for maximum output. 500 lumens on low for extended 6-hour runtime and close-up tasks.
-
USB-C rechargeable: Standard USB-C charging from any compatible 5V 1A power source. Cable included. Full charge in 5-6 hours.
-
Fold-out stand: Positions the light at a range of angles for hands-free use. Stable on most flat surfaces.
-
IP44 protection: Protected against water splash from any direction. Suitable for outdoor site use and light rain.
-
ABS and rubber construction: Impact-resistant body with rubber moulded grip. Built for site handling.
-
Cable-free operation: Rechargeable with no dependency on 110V supply. Works anywhere within battery range.
-
CE marked: Meets UK and EU product safety requirements.
Who is this for
Trades and roles:
-
Site operatives
-
Maintenance technicians
-
Electricians and M&E contractors
-
Groundworkers
-
Plant and facilities operatives
Industries:
-
Construction
-
Civil engineering
-
Facilities management
-
Utilities
-
Maintenance
Specifications
| Specification | Detail | |
| Product Name | MAX Rechargeable LED Spotlight Work Light - 1100lm | |
| SKU | EL060002 | |
| Brand | MAX (CMT Group) | |
| High Setting Output | 1100lm | |
| Low Setting Output | 500lm | |
| Runtime (High) | 3 hours | |
| Runtime (Low) | 6 hours | |
| IP Rating | IP44 (water splash resistant) | |
| Battery | 3.7V 4400mAh rechargeable (integrated) | |
| Charging Input | USB Type-C, 5V DC 1A | |
| Charge Cable Included | Yes (USB Type-C) | |
| Charge Time | 5-6 hours | |
| Body Material | ABS plastic and rubber | |
| Stand | Fold-out adjustable stand | |
| Compliance | CE marked | |
| Use | Indoor and outdoor | |
Compatibility
| Application or condition | Status | |
| Portable rechargeable site and task lighting | ✓ Suitable | |
| Hands-free use with fold-out stand | ✓ Suitable | |
| Outdoor use in light rain and splash | ✓ Suitable (IP44) | |
| Indoor site lighting | ✓ Suitable | |
| Van and vehicle emergency kit | ✓ Suitable | |
| Cable-free portable use | ✓ Suitable (rechargeable, no supply required) | |
| Sustained heavy rain or water jets | ✗ Not recommended. IP44 covers splash only. | |
| Submersion | ✗ Not suitable | |
| Explosive or flammable atmospheres | ✗ Not suitable. No ATEX certification. | |
Who is this for
This light suits site operatives, maintenance technicians, and trades professionals who need reliable portable illumination without dependency on a 110V supply. It is particularly suited to groundworkers and plant operatives who need a portable light without running cable, electricians and M&E trades working in areas without a transformer, and maintenance professionals conducting planned rounds in facilities where trailing a cable is impractical. The fold-out stand makes it self-supporting for hands-free use at a fixed position.
Typical applications
-
Close-up task lighting for electrical installation, connection inspection, and panel work in areas without a 110V supply.
-
Portable area lighting for groundwork operatives in trenches, access shafts, and excavations without a nearby transformer.
-
Maintenance round lighting in plant rooms and enclosed service areas where trailing a cable is impractical.
-
Emergency backup lighting when primary site lighting fails during a shift.
-
Van and site vehicle kit for operatives who need a reliable rechargeable work light for all-day use.
-
Mobile inspection lighting for site managers and health and safety officers conducting dark-area walkthroughs without temporary electrical setup.
-
Supplementary close-up task lighting alongside UtilityLite LED strip where a portable spotlight is needed for specific work positions.
How to use
Step 1: Charge fully before first use via the USB-C cable (included). Full charge takes 5-6 hours.
Step 2: Unfold the stand to the required angle. Place on a stable flat surface for hands-free use.
Step 3: Press the power button once for high brightness (1100 lumens). Press again for low brightness (500 lumens). Press again to switch off.
Step 4: Use the low setting for extended tasks and close-up work to preserve battery life.
Step 5: Recharge via USB-C before the battery is fully depleted to maintain battery health.
Common mistakes
-
Running on high brightness for all tasks. Low setting (500 lumens) doubles the runtime from 3 to 6 hours and is sufficient for most close-up work. Use high only when the full beam is needed.
-
Placing the unit on an unstable or uneven surface without checking the fold-out stand is secure.
-
Storing the unit without charging periodically. Recharge every 3 months if not in regular use to maintain battery health.
-
Using in sustained heavy rain. IP44 covers water splash but not water jets or submersion. Avoid prolonged heavy rain exposure.
Safety
IP44 covers water splash from any direction. Not rated for water jets or submersion. No ATEX certification. Do not use in explosive or flammable atmospheres. Do not stare directly at the operating light source. Do not cover the unit during operation. Do not attempt to open or modify the housing. Dispose of in accordance with UK WEEE and battery disposal regulations at end of service life.
Maintenance
Wipe the housing and lens with a dry cloth after use in wet or dusty conditions. Keep the USB-C port clean and free of debris when not charging. Do not immerse in water. Recharge every 3 months if storing for an extended period.
Frequently Asked Questions
Q: What is the difference between the two brightness settings?
A: High setting delivers 1100 lumens for maximum output with a battery life of 3 hours. Low setting delivers 500 lumens for extended runtime of 6 hours. Low is sufficient for close-up tasks, plan reading, and inspection work. Use high when the full beam distance and brightness are needed.
Q: What is this light NOT suitable for?
A: IP44 covers water splash but not water jets or submersion. Not for use in explosive or flammable atmospheres. Battery life is fixed at 3 hours on high and 6 hours on low. For all-shift permanent-position lighting, a mains-powered 110V work light is the more suitable option.
Q: How long does the battery last and how long does it take to charge?
A: 3 hours on high (1100 lumens). 6 hours on low (500 lumens). A full charge takes 5-6 hours from a standard 5V 1A USB-C power source.
Q: What charger do I need?
A: A standard USB-C charger outputting 5V DC 1A. Most modern phone chargers meet this specification. The USB-C cable is included but a wall adaptor is not. Any standard USB-C wall adaptor will work.
Q: Is it suitable for outdoor use?
A: Yes, for light outdoor use. IP44 covers water splash from any direction, making it suitable for outdoor site conditions and light rain. Avoid sustained heavy rain, water jets, or submersion.
Q: How does the fold-out stand work?
A: The stand folds out from the rear of the unit and holds it upright at a range of angles on a flat surface. Adjust the stand angle to direct the beam at the working area. The unit can also be hand-held when the stand is folded away.
Q: How does this compare to the MAX 110V Portable LED Work Light (MAXLED10)?
A: The MAXLED10 is a 10W 900 lumen unit on a 3m cable powered by a 110V CTE transformer, with a tilt-adjustable head and tripod stand. This unit is rechargeable, requires no cable or transformer, and is more compact for portable use. The MAXLED10 suits permanent-position task lighting with a 110V supply. This unit suits portable, cable-free use across multiple positions or where no 110V supply is available.
Q: Is this part of the MAX range?
A: Yes. MAX is CMT Group's own range of professional site equipment. The full MAX range is available at cmt.co.uk.
