Quick-release mounting connector for the Dustlight Mini personal dust monitor, for vehicles and storage areas where fast access to the device matters.
Quick-release mounting connector for the Dustlight Mini personal dust monitor, for vehicles and storage areas where fast access to the device matters.
| BULK DISCOUNT | 10 | 20 |
|---|---|---|
| Price | £7.13 £8.56 | £6.61 £7.93 |
Order 1x to earn 7 FASTPoints
Order to earn 7 FASTPoints
Log in to access trade discountsQuick-release mounting connector for the Dustlight Mini personal dust monitor. Where the standard Klick Fast connector requires the device to be inverted before it slides free, the Go Connector releases with a direct grab. No twisting, no inversion. Just remove and go.
Compatible with all Peter Jones Klick Fast docks and retrofittable to any device already fitted with a Peter Jones adapter plate.
A standard Klick Fast connector holds the device securely in any dock, but releasing it takes two steps: twist and invert. On a vehicle dashboard or in a storage area, that slows you down every time you need to grab the monitor and walk into a dusty area. The Go Connector removes that step. Press in, grab, and the Dustlight Mini is in your hand.
No-inversion release: The Go mechanism releases with a direct grab, no twisting to an inverted position needed. Faster than the Standard Connector for any situation where the monitor is accessed and replaced repeatedly throughout the shift.
Universal dock compatibility: Works with every Peter Jones Klick Fast dock. Vehicle dashboard mounts, screw-on docks, garment docks, storage area docks, belt docks, all compatible without adaptation.
Retrofit ready: Fits any device or holder already equipped with a Peter Jones adapter plate. Not limited to the Dustlight Mini.
Seven ratcheted positions: Once docked, the connected device can be rotated into any of seven locked positions. Useful when the dock is on a vehicle or surface where the angle matters for hands-free reading.
Peter Jones Nylon construction: Manufactured by Peter Jones ILG in the UK. The proprietary nylon formula maintains dimensional accuracy across the temperature and handling range of site use, which matters because dock engagement has to be precise every time.
Compact and lightweight: 20mm x 9mm x 20mm, 1.06g. Adds nothing meaningful to the size or weight of the Dustlight Mini.
Trades and roles:
Site managers
Health and safety officers
Construction operatives
Plant and vehicle operators
Facilities managers
Industries:
Construction
Civil engineering
Woodworking and joinery
Metalworking and fabrication
Manufacturing
| Specification | Detail |
| Product Name | Klick Fast Go Connector for Dustlight Mini |
| SKU | PP190001 |
| Connector Type | Go, no-inversion quick release |
| Compatible Device | Dustlight Mini; devices fitted with Peter Jones adapter plates |
| Compatible Docks | All Peter Jones Klick Fast docks |
| Release Mechanism | Direct grab, no inversion required |
| Locking Positions | 7 ratcheted positions once docked |
| Material | Peter Jones Nylon |
| Colour | Black |
| Dimensions | 20mm (W) x 9mm (D) x 20mm (H) |
| Weight | 1.06g |
| Application or condition | Status |
| Dustlight Mini personal dust monitor | ✓ Compatible |
| Devices fitted with Peter Jones adapter plates | ✓ Compatible |
| All Peter Jones Klick Fast vehicle docks | ✓ Compatible |
| Peter Jones Klick Fast screw-on docks | ✓ Compatible |
| Peter Jones Klick Fast garment and clothing docks | ✓ Compatible |
| Peter Jones Klick Fast belt docks | ✓ Compatible |
| Environments requiring maximum device retention | ✗ Not recommended, use Ultra-Lock |
| Devices without Peter Jones adapter plates | ✗ Not compatible |
The Go Connector is used by site managers and health and safety officers setting up Dustlight Mini monitoring across vehicles, plant cabs, and site storage points. It suits any location where the monitor needs to be grabbed and taken into a work area quickly. That makes it the right connector for mobile monitoring setups, not fixed permanent stations where the Standard or Ultra-Lock would be more appropriate.
Mounting the Dustlight Mini on a vehicle dashboard dock in a plant cab, so the operator can grab the monitor and carry it into a dusty work zone without fiddling with the release.
Attaching the Dustlight Mini to a storage area or welfare unit dock, where workers collect and return the device at the start and end of each shift.
Setting up a rapid deployment point outside a high-dust task area such as a cutting or grinding station, so the monitor can be grabbed immediately when work begins.
Moving a single Dustlight Mini between multiple docks across a site as monitoring priorities shift, relying on the Go release to make that movement quick and frictionless.
Retrofitting the connector onto an existing device or holder already equipped with a Peter Jones adapter plate, without replacing the full mounting system.
Step 1: Confirm the Dustlight Mini or your device is fitted with a Peter Jones adapter plate. The Go Connector attaches to the adapter plate, not directly to the device casing.
Step 2: Press the Go Connector firmly onto the adapter plate until it seats fully.
Step 3: Slide the connector into any Peter Jones Klick Fast dock. It locks on entry.
Step 4: Rotate the docked device into one of the seven ratcheted positions for the best angle.
Step 5: To release, grip the device and pull directly. No inversion or twisting is needed.
Using the Go Connector in a high-security environment: The Go releases with a direct grab, which is by design. In areas where accidental or unauthorised removal is a concern, use the Standard or Ultra-Lock connector instead.
Attempting to fit without a Peter Jones adapter plate: The connector attaches to the adapter plate on the device. Without one fitted, it cannot be used.
Assuming all Klick Fast connectors are interchangeable: The Go, Standard, and Ultra-Lock all dock with the same Klick Fast docks, but the release mechanism is different for each. Confirm the right type before ordering.
Ignoring grit and debris in the dock: Site dust packed into the dock engagement point can prevent a clean lock. A quick wipe before use avoids this.
The Go Connector is designed for quick release, not maximum retention. Do not use it where accidental removal of the device could present a hazard. For those applications, use the Ultra-Lock. Inspect the connector and dock regularly for wear. Do not use if the nylon housing shows cracking or visible deformation.
Wipe clean with a damp cloth after use. Keep the dock contact point clear of grit and debris. Store away from solvents and direct heat. Replace if any cracking or deformation of the nylon housing is visible.
Q: What is the difference between the Go Connector and the Standard Klick Fast Connector?
A: The Standard Connector locks into any Klick Fast dock and releases by twisting the device to an inverted position and sliding it free. The Go Connector releases with a direct grab, no inversion needed. The trade-off is retention: the Standard holds more firmly. The Go is designed for situations where speed of access matters more.
Q: Which Klick Fast docks does this work with?
A: Every Peter Jones Klick Fast dock. Vehicle dashboard docks, screw-on docks, garment and clothing docks, belt docks, and any other dock in the Peter Jones range. If the dock is a genuine Peter Jones Klick Fast product, the Go Connector will engage with it.
Q: What devices can this connector be fitted to?
A: The Go Connector fits the Dustlight Mini directly. It can also be retrofitted to any other device or holder already equipped with a Peter Jones adapter plate. It is not limited to dust monitors.
Q: What is the Go Connector NOT suitable for?
A: It is not suitable for environments where accidental or unauthorised removal of the device is a safety concern. The Go releases with a direct grab, intentionally. For high-retention applications, use the Standard or Ultra-Lock connector. It is also not compatible with devices that do not have a Peter Jones adapter plate fitted.
Q: Can I use the same Go Connector across multiple docks on a site?
A: Yes. Because the Go Connector is compatible with all Peter Jones Klick Fast docks, a single Dustlight Mini can be moved freely between any number of dock points across a site. That makes it straightforward to set up vehicle, storage, and welfare unit mounting points and use one device across all of them.
Q: How should I maintain the connector?
A: Wipe it down with a damp cloth after use. Keep the dock contact point clear of grit, which can prevent a clean lock. Inspect the nylon housing periodically. Replace if cracking or deformation appears.
Q: What does Peter Jones Nylon mean and why does it matter?
A: Peter Jones Nylon is the proprietary polymeric formula used by Peter Jones ILG, the manufacturer, across the Klick Fast system. It is engineered to maintain the dimensional precision needed for reliable dock engagement across a range of site temperatures and handling conditions. Standard injection-moulded plastics can distort under heat or repeated loading in ways that affect whether the lock engages cleanly.
