Skip to the beginning of the images gallery

NLG bottle holder with green 500ml water bottle front view black neoprene adjustable buckle strap | CMT Group UK

NLG Bottle Holder Dropped Object Prevention | CMT Group UK

Neoprene bottle holder angled view with green water bottle top yoke buckle closure visible | CMT Group UK

NLG bottle and spray can holder angled view with aerosol showing adjustable strap and NLG badge | CMT Group UK

Neoprene bottle and spray can holder for height workers, securing water bottles and aerosols up to 1kg with a rated D-ring tethering point.

Universal fit for bottles and cans 16 to 21cm tall
ANSI/ISEA 121-2023 certified, CE and UKCA marked
1kg rated, 2:1 dynamic safety factor, third-party tested
Abrasion-resistant neoprene, military-grade ballistic nylon buckles
Rear harness clip and D-ring, secure even when contents are in use
Fits standard spray cans, aerosols, and water bottles up to 500ml

NLG Bottle Holder - 1kg Bottle and Spray Can Tethering at Height

Code

NLG101550

8 In Stock

Neoprene bottle and spray can holder for height workers, securing water bottles and aerosols up to 1kg with a rated D-ring tethering point.

Universal fit for bottles and cans 16 to 21cm tall
ANSI/ISEA 121-2023 certified, CE and UKCA marked
1kg rated, 2:1 dynamic safety factor, third-party tested
Abrasion-resistant neoprene, military-grade ballistic nylon buckles
Rear harness clip and D-ring, secure even when contents are in use
Fits standard spray cans, aerosols, and water bottles up to 500ml

£22.68 £18.90

Buy 20 for £21.00 £17.50 each and save 7%
Buy 50 for £19.18 £15.98 each and save 15%

BULK DISCOUNT	20	50
Price	£17.50 £21.00	£15.98 £19.18

Order 1x to earn 18 FASTPoints

Order to earn 18 FASTPoints

8 In Stock

Product Details

NLG Bottle Holder

Neoprene bottle and spray can holder for roofers, maintenance engineers, facade operatives, and height workers who carry aerosols, spray adhesives, lubricants, or water bottles from elevation and need them secured, accessible, and compliant with a site dropped object prevention programme. The universal fit accommodates standard spray cans and aerosols alongside water bottles up to 500ml, and the product can be opened and used without removing it from the holder.

How in-use tethering solves the spray can dropped object problem

Standard spray cans have no natural tether point. Fitting a wrap tether or adhesive anchor to a disposable aerosol is impractical for most sites, so workers carry spray cans by hand or set them down on a scaffold board between applications. A 400ml aerosol canister set down on a scaffold board, knocked from a platform edge, or dropped during use from 10 metres generates significant impact energy that can cause serious injury to operatives below. The NLG Bottle Holder wraps around the body of the can or bottle, secures it through the neck with a top yoke, and provides both a rear clip for direct harness attachment and a rated D-ring for lanyard connection. The contents remain accessible throughout the shift without removing the container from the holder.

Key Features

Universal fit for 16 to 21cm containers: Accommodates standard aerosol and spray cans, contact adhesive canisters, spray lubricants, and water bottles up to 500ml without modification to the container. Sized to fit the most commonly used site spray cans by height.
Rear belt and harness clip: Clip on the reverse attaches the holder directly to a work belt or harness loop, positioning the container close to the body for one-handed access without requiring a separate anchor point for the carrying function.
Rated D-ring lanyard attachment: Provides the tethering point for a rated tool lanyard connected to a harness or belt anchor. The container is secured even when the clip alone would not constitute compliant dropped object prevention.
In-use access: The top yoke and adjustable buckle retain the bottle or can in the holder whilst the operative sprays, drinks, or applies product. No removal is needed between uses.
Abrasion-resistant neoprene with ballistic nylon buckles: Neoprene body provides cushioned protection and resists site abrasion across a full working season. Military-grade ballistic nylon buckles maintain structural integrity under daily use in harsh environments.
ANSI/ISEA 121-2023 certified: Independently load tested at a 2:1 dynamic safety factor to the primary dropped object prevention standard. CE and UKCA marked.

Who is this for

Trades and roles:

Roofers and waterproofing operatives
Maintenance and facilities engineers
Facade and cladding installers
Painters and decorators working at height
Scaffolders and site operatives

Industries:

Construction and roofing
Facilities management and maintenance
Infrastructure and utilities
Industrial maintenance
Renewables and energy

Specifications

Specification	Detail
Product Name	NLG Bottle Holder - 1kg Bottle and Spray Can Tethering at Height
SKU	NLG101550
Product Category	Bottle and Spray Can Holder with Tethering Point
Max Load	1 kg (2.2 lbs)
Safety Standards	ANSI/ISEA 121-2023, CE, UKCA, NS 9611:2022+AC
Load Testing	Dynamic, 2:1 safety factor, third-party certified
Body Material	Abrasion-resistant neoprene
Hardware	Military-grade ballistic nylon buckles
Retention System	Top yoke with adjustable buckle closure
Attachment Points	Rear belt/harness clip and D-ring lanyard point
Compatible Containers	Standard spray cans, aerosols, and water bottles up to 500ml
Container Height Range	16 to 21cm (6" to 8")
NLG ID	Serialised, scannable, unique serial number
Dimensions	18cm (H) x 7cm (W) x 7cm (D)
Max Lanyard Length	200 cm (78 in)
Compliance Markings	CE, UKCA
Unit Weight	50 g

Compatibility

Compatible With	Status
Standard spray cans and aerosols 16 to 21cm tall	Compatible
Water bottles up to 500ml within 16 to 21cm height range	Compatible
Direct attachment to harness or work belt via rear clip	Compatible
Rated tool lanyards via D-ring	Compatible
In-use access to bottle or can contents while holstered	Compatible
Containers below 16cm tall	Not recommended
Containers above 21cm tall	Not recommended
Total container weight exceeding 1kg	Not recommended
Use without rear clip or D-ring lanyard at height	Not recommended

Who is this for

Roofers, maintenance engineers, facade operatives, and height workers who use spray cans, aerosol adhesives, lubricants, primers, or water bottles as working materials throughout a shift at elevation. Without a purpose-built holder, most operatives carry these items by hand between applications or set them down on a scaffold board, neither of which constitutes compliant dropped object prevention. The rear harness clip positions the holder close to the body for one-handed access, and the D-ring provides the rated tethering point required by a formal dropped object prevention programme.

Typical applications

Tethering an aerosol adhesive or contact cement spray during roofing felt or membrane installation from a scaffold or elevated access platform, with the can accessible for repeated applications throughout the shift.
Securing a spray lubricant during maintenance work on overhead machinery, structural bearings, or elevated mechanical equipment where the can is accessed frequently during the task.
Keeping a water bottle secured during extended work sessions at height where access to a water source is not possible and the operative needs hydration without descending between uses.
Tethering a marking spray during structural steel erection or timber frame installation at height where the can is used between fixing positions across a working platform.
Securing a spray sealant or primer canister during external cladding or facade installation where the operative needs both hands free between spray applications.

How to use

Step 1: Open the buckle clip by pressing both side clips at the same time.

Step 2: Move the top yoke of the bottle holder out of the way and lower the bottle or can into the open neoprene tube from above.

Step 3: Place the top yoke over the neck of the bottle or can and press both parts of the buckle together to secure. Pull down on the webbing tab below the buckle to improve the fit around the neck.

Step 4: Test that the bottle or can is held firmly in the holder and cannot be shaken free before attaching a lanyard.

Step 5: Clip the rear clip to a belt loop or harness attachment point. Attach a rated tool lanyard to the D-ring and connect the lanyard carabiner to a rated anchor point before working at height.

Step 6: Confirm all connections are secure before beginning work.

Common mistakes

Relying on the rear clip alone as dropped object prevention. The rear clip attaches the holder to the harness or belt for positioning and easy access. A rated lanyard connected to the D-ring and a rated anchor point is required for compliant at-height tethering.
Using a container outside the 16 to 21cm height range. Containers shorter than 16cm will move within the neoprene tube. Containers taller than 21cm may not be correctly retained by the top yoke.
Using with a full litre or larger water bottle. Verify both the height (16 to 21cm) and the total weight (maximum 1kg including contents) before use. A full 1-litre metal water bottle may approach or exceed the 1kg limit.
Not fully locking the buckle before ascending. The buckle must click fully closed on both sides. A partially closed buckle may release under load.

Safety

Certified to ANSI/ISEA 121-2023, CE, UKCA, and NS 9611:2022+AC. Maximum rated load is 1kg. Verify the total weight of the container and its contents before use. The rear clip attaches the holder to the harness for carrying. A rated tool lanyard connected to the D-ring is required for compliant dropped object prevention. This product is not a fall arrest device. After any drop event involving the holder, quarantine and inspect before returning to service. Chemical contamination from aerosol contents should be cleaned from the neoprene immediately after use.

Maintenance

Inspect the neoprene body, top yoke, adjustable buckle, rear clip, and D-ring before each use. Check the buckle locks positively and both sides click securely. Check the D-ring for cracking or deformation. Check the neoprene body and top yoke for cuts, tears, or chemical degradation from previous use. Rinse adhesive, lubricant, or other chemical residue from the neoprene surface with a damp cloth after each use. Store away from solvents, heat sources, and direct sunlight. Scan the NLG ID tag to access inspection checklists and log equipment condition records.

Frequently Asked Questions

Q: What size spray cans and aerosols will this holder fit?
A: The holder fits any cylindrical container between 16 and 21cm (6" to 8") tall. This covers the majority of standard aerosol adhesives, contact cement sprays, spray lubricants, marking sprays, and primer aerosols in common site use. The adjustable buckle strap accommodates variation in can diameter across this height range. Verify your specific can's height before ordering. Water bottles up to 500ml in standard cylindrical form factor also fall within this range.

Q: What safety standards does this holder meet?
A: The holder is certified to ANSI/ISEA 121-2023, the primary international standard for dropped object prevention tethering equipment, and also meets NS 9611:2022+AC, the Norwegian standard for tool lanyards and tethering systems. It carries CE and UKCA markings. Load testing is dynamic at a 2:1 safety factor, independently verified by a third-party laboratory. Declarations of Conformity and load test certificates are available on request at team@neverletgo.com.

Q: What is this holder NOT suitable for?
A: The holder is not suitable for containers below 16cm or above 21cm in height, or for any container weighing more than 1kg including contents. It is not suitable for use without a rated lanyard connected to the D-ring at height: the rear clip positions the holder on the harness but does not constitute compliant dropped object prevention. It provides no personal fall arrest function. Containers with highly irregular shapes may not seat correctly in the cylindrical neoprene tube.

Q: Can I access and use the spray can whilst it is in the holder?
A: Yes. The top yoke sits over the neck of the can with the spray nozzle protruding above the holder, and the adjustable buckle secures the can around the upper body without covering the nozzle or trigger mechanism. The operative can spray directly from the holder without removing the can between applications.

Q: Is the rear clip alone sufficient for dropped object prevention at height?
A: No. The rear clip attaches the holder to a harness or belt loop for carrying and positioning during work. For compliant dropped object prevention under a site safety programme, a rated tool lanyard must be connected to the D-ring on the front of the holder and attached to a rated anchor point. Both the clip and the lanyard should be in use simultaneously when working at height.

Q: Will chemical residues from spray adhesives or lubricants damage the neoprene?
A: Repeated exposure to aerosol propellants, solvents, and adhesive residues may degrade the neoprene surface over time. After each use, wipe the holder down with a damp cloth to remove chemical residue. Avoid prolonged contact with strong solvents. Inspect the neoprene before each use and retire from service if the material shows cracking, softening, or discolouration consistent with chemical attack.

Q: How does this compare to improvised solutions like rope cradles or zip-tie mounts?
A: Improvised solutions have no rated load, no third-party certification, and no inspection trail. They cannot satisfy the requirements of a site dropped object prevention programme under Work at Height Regulations 2005 compliance. The NLG Bottle Holder is independently load tested to ANSI/ISEA 121-2023 at 1kg, carries a unique serial number for inspection logging, and provides a rated D-ring tethering point that connects to any standard rated tool lanyard. Improvised alternatives cannot provide any of these compliance assurances.

Q: What should I do if the holder has been dropped at height?
A: Quarantine the holder immediately. Inspect the neoprene body for tears or damage, the buckle for distortion, the D-ring for cracking or deformation, and the rear clip for damage. Clean off any chemical contamination before inspecting the neoprene surface beneath it. Retire from service if any component shows damage or degradation. Scan the NLG ID tag to log the drop event and access the inspection checklist.

Knowledge Centre